Heat recovery units

Air flow: 200, 300, 500 m³/h

DAPHNE is an ultra-quiet heat recovery unit, that’s sophisticated yet effortless. It features powerful and energy-efficient EC motors that, along with a highly efficient heat ...

Air flow: 150, 300, 500, 700 m³/h

... high-performance residential heat recovery units recommended for under-ceiling constructions in flats, residential houses, family houses and low-energy and passive houses. 4 sizes ...

Air flow: 700 m³/h - 900 m³/h

Energy efficient heat recovery unit designed for installation in commercial interiors, such as shops, offices, coffee bars, restaurants and sport facilities. . 2 sizes with air flow ...

Air flow: 500 m³/h - 4,000 m³/h

Overview VHR DX heat recovery ventilation units with heat pump designed for saving energy and also improving indoor air quality. VHR DX units provide ...

Air flow: 4,000 m³/h - 25,000 m³/h

VENCO AHU Type Heat Recovery Ventilation Units (VS) are designed for saving energy and also improving indoor air quality. VS units provide the facilities ...

Air flow: 299 m³/h - 4,857 m³/h

Overview VENCO Heat Recovery Ventilation Units (VHR) are designed for saving energy and also improving indoor air quality. VHR units provide ventilation for several ...

... Hz 230/1/50 Efficiency 3% 53 Heating recovery capacitykW 1,4 Outlet supply air temperature°C 8,2 Dimensions wxhxdmm 750 x 290 x 990 Weightkg 41 (1) Referred to the nominal air flow after filter and plate heat ...

... Hz 230/1/50 Efficiency 3% 54 Heating recovery capacitykW 2,8 Outlet supply air temperature°C 8,7 Dimensions wxhxdmm 750 x 290 x 990 Weightkg 41 (1) Referred to the nominal air flow after filter and plate heat ...

Air flow: 60 m³/h

... series). The fresh air ventilation with heat recovery in the WHR 61 unit occurs in two phases. There is an extraction phase in which the warm air forced outside by the fan transfers the ...

Air flow: 37, 42 m³/h

The WHR 40 “single room” device for mechanical ventilation with heat recovery is ideal for the renewal of the air in rooms in which it is not possible to install a ducted system. The unit ...

Air flow: 37, 42 m³/h

The WHR 40 Plus device for mechanical ventilation with heat recovery is ideal for the renewal of the air in those rooms where it is not possible to install a ducted system. The unit represents ...

... energies dictates that we must adopt technologies that are founded on the use of natural energy (thermal, solar, etc.) and heat recovery.

Air flow: 250 m³/h - 1,300 m³/h

Air-to-air enthalpy heat recovery device, thermal efficiency up to 76% 7 MODELS (from E 25H to E 130H) • Galvanized steel self-supporting panels, internally and externally insulated; ...

Air flow: 400 m³/h - 4,700 m³/h

Units Series Version UT REC+ with recuperator in aluminium and standard fans UT REC E+ with recuperator in aluminium and EC fans Unit specification • Air-to-air aluminium counterflow heat ...

Air flow: 310 m³/h - 3,800 m³/h

... UT REC R+ horizontal unit and standard fans UT REC RE+ horizontal unit EC fans MODEL FEATURES Inwall-installation Ceiling-cassette Others • Rotary, adsorption heat exchanger ...

Air flow: 0 m³/h - 289 m³/h

... (formerly MRXBOX95-WM2) is designed to provide optimised balance (supply & extract) mechanical ventilation with heat recovery. This unit is a cost-effective MVHR solution for medium-sized ...

Air flow: 0 m³/h - 289 m³/h

... Specific Fan Power (SFP), offers high performance and therefore helps you gain a high SAP score. This MVHR unit includes an integral humidity sensor which will automatically boost both the supply and ...

Air flow: 0 m³/h - 332 m³/h

... powerful unit of its size available, its a compact but high duty wall-mounted MVHR system designed specifically for medium to large houses and apartments with up to 95% efficiency. Nuaire's award-winning range of ...

Water Source LG Multi V Water IV Heat Recovery systems permit synchronous cooling and heating in different zones at the same time. Units are available from 6 tons to 48 tons. Overview The ...

The Heat Recovery Unit (HRU) creates an integrated flow for the LG VRF Heat Recovery system's design. Overview The LG Heat Recovery ...

Air flow: 470, 590, 880, 1,180 ft³/min

... operated independently Ventilation Heat Exchange Mode: •Draws outdoor air and indoor exhaust air across air‐to‐air heat exchanger Ventilation Normal (Bypass) Mode: •Controls by‐pass damper to bypass ...

Air flow: 6 l/s - 15 l/s

... only 3.2 W Through-The-Wall Heat Recovery Unit The Vent-Axia Lo-Carbon Tempra is designed to fit in 100mm diameter hole and is suitable for refurbished properties in kitchen, bathroom, ...

Air flow: 48.3, 55.8, 70.3 l/s

Powered heat recovery module for smaller commercial applications Up to 70% heat recovery With 150mm duct connection Extremely quiet on low speeds Low power consumption Washable ...

Air flow: 15 l/s - 49 l/s

• Heat recovery unit for smaller residential or commercial applications up to 180m2 • Up to 70% heat recovery • Low power consumption • Effective ...

Air flow: 350, 450, 500 m³/h

Heat recovery ventilation unit HRU-PremAIR-350 is a modern device with 350 m3/h air flow @ 100 Pa. Unit is made from cutting edge materials – PET heat ...

Air flow: 450 m³/h - 3,800 m³/h

Static heat recovery units with cross flow that can be combined with air-air or water-air conditioning systems to provide significant energy savings. TECHNICAL DATA RCAH: efficiency over ...

R32 VRF heat recovery outdoor units available from 22-34kW, compliment the widest range of innovative VRF solutions available on the market. They deliver lower GWP solutions and offer ...

Air flow: 54, 28, 14 m³/h

... cleaner air supply. *Sound radiated at 3 m Single room Heat Recovery Ventilation unit. Airflow from 14 m3/h to 54 m3/h. 3 possible speed modes. 2 Filters G3. EC Motor. Ceramic ...

Air flow: 380 m³/h - 3,300 m³/h

... precoated steel sheet metal outer skin RAL 9002 • Non-flammable mineral wool thermal and acoustic insulation • High efficiency (>75%) counterflow heat recovery, aluminium ...

Air flow: 160 ft³/min - 220 ft³/min

Powerful centrifugal blower replaces stale, unhealthy air with a stream of fresh air. Heat exchange core efficiently transfers energy from the exhaust air to the incoming fresh air. Works with your existing central ...

Air flow: 0 m³/h - 500 m³/h

... between 80 m3/h and 125 m3/h. Dehumidifying air flow between 130 m3/h and 250 m3/h. • Ultra high-efficiency counter-flow type heat exchanger fashioned from moulded plastic (PS) • It contains fluorinated greenhouse ...

Air flow: 50 m³/h - 3,900 m³/h

... counter-current heat recovery unit for indoor installation. Air flow rate: 100 ÷ 650 m³/h Repuro is a heat recovery unit which ...

The warm air distribution system will recover the heat from an insert or a stove and dispatch it into the different rooms of the house, providing a better heat distribution. The system operates under ...

Air flow: 300 m³/h - 2,600 m³/h

... high-performance heat recovery units of the Energy Plus series units have been designed to allow you to save energy in the ventilation systems of public and private premises, ...

Air flow: 800 m³/h - 5,000 m³/h

For a pleasant feeling of well-being SupraBox COMFORT (H) The Rosenberg SupraBox COMFORT energy recovery units are space-saving and distinguished primarily by their high energy efficiency. They provide ...

... system with user friendly control panel The heat recovery ventilation units ERS 10 and ERS 20 are accessories to our ground source and air/water heat pumps. They can ...

Air flow: 250 m³/h - 2,000 m³/h

KPI Energy recovery uses Celluloid heat exchanger to transfer temperature and humidity. This product is suitable for environments where the air contained an important amount of humidity. The airflows ...

VRF (DVMS) Heat and energy recovery ventilator ERV System Enjoy exceptional efficiency Save time with a flexible and easy installation process Recover energy and remove discharged ...

Air flow: 172, 160 m³/h

FEATURES Slim Heat Recovery Unit for IN-LINE installation. Polypropylene, counter flow heat exchanger with >90% efficiency. EC centrifugal fan with backward blades. Pre-painted ...

EM-box is for anyone who wants passive heat recovery via the homes range hood. The EM-box is an accessory item that can be connected to Nilan's domestic system. With an EM-box the range hood can be ...