- Heating, Air Conditioning, Electricity >
- Access control and security >
- Infrared detector
Infrared detectors
These compact PIR detectors provide automatic control for lighting, heating and ventilation loads. The PIR sensor can be mounted either flush into a ceiling tile or using a surface mounting box. The ...
CP Electronics
100% Wire-Free Pet Immune Passive Infrared (PIR) Motion Detector Must be paired with the A1 With a compact and sleek design, the T1 provides 100° wide-angle coverage with fewer false alarms due ...
built-in photocell with 180 B It is recommended: TX Micro switch 2-OFF minimum power and apply the adhesive inside the container of the RX photocell, in particular in cases of refl ection (fl oors, walls, and shiny or particularly ...
NOLOGO
The WAPIR is a ceiling mounted 360o PIR motion sensor. The WAPIR motion detector module allows scenes to be selected automatically via movement. In factory default setting, the unit will select scene 1 and off, with ...
Rako Controls
With FINDER PIR motion detectors and presence detectors you will always have the light you need, only when you need it. Finder detectors, as soon as they detect the slightest movement ...
... waterproof deck mounted infrared presence sensor Available finishes: Satin Polished Special finishes: X. Light gold P. Copper Z. Bronze KD. Black Diamond Product variant: IRS 02 - ...
... Product variant: IRS 03 - IP67 waterproof wall mounted infrared presence sensor
Integrating the heating system with accessories such as: presence detector, remote control or dimmer, can optimize the system’s efficiency and customer’s comfort. IP Protection rate - IP54 Power - 4000 Master Box ...
Width: 122 mm
Length: 122 mm
Detection angle: 360 °
The Crestron® CEN-ODT-C-POE is a low-profile, ceiling-mounted occupancy sensor that features passive infrared (PIR) and ultrasonic (US) motion detection technology. The CEN-ODT-C-POE is designed for ...
... with a timer function, allowing the user to control the amount of time the fan/light stays on after they leave the room. The sensor can detect motion in rooms up to 900 sq. ft. and up to 35 ft. away from the sensor.
... pointer built into the remote, provides accurate sensor selection for programming Sensor can be programmed with a laptop PC as well as with a remote Status LEDs facilitate sensor programming Each ...
... presence detector activates the lighting when a person passes through a given detection zone and then switches off some time after he or she has passed. -It works in the dark with automatic control by a built-in infrared ...
HBIR28/2CH is a Bluetooth PIR standalone motion sensor, On/Off control with two independent relay channel outputs. It has two relays built-in: one is voltage-free contact, which is NO (normally open contact) and NC (normally closed contact) ...
Premium Door Sensor IR motion Can be used in supermarket, stores and a variety of people frequently through the small automatic door control occasions, can also be used in small space of the human body presence detection, ...
Premium Sliding Doors
... automatically starts when the infrared sensor detects a presence in the room. When the person leaves the room the fan will continue to run depending on the timer setting (from 2 up to 25 min). In accordance ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how ArchiExpo processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining