Plastic waterproofing membranes

... Pre-fabricated waterproofing membrane made of bitumen and plastomeric polymers (APP) having a single-fiber non-woven polyester reinforcement that provides good mechanical features and excellent dimensional stability. Aplicare ...

... Loose laid plastic quick sealing sheet with high tear resistance or balconies, patios and terraces in combination with Watec® and AquaDrain® drainage mats. DiProtec® SDB is a high-quality, loose laid sealing sheet, enabling quick and ...

... • Wrapping artificial lake ..... PVC waterproofing membrane This waterproofing system is based on fully synthetic adhesive waterproof membrane. This ...

... Breathable membrane made with monolith polyurethane foils and a core polyester layer. Resistant to water, pouring rain and wind. Adhesive or hot-air joining. A simple heat gun is enough to join the membranes by blowing ...

... For substrate bonding with PU adhesive RESITRIX® CL is a hot air-weldable waterproofing membrane with a synthetic rubber (EPDM) base. RESITRIX® CL must preferably be used for substrate bonding with ...

... The surface of the strip has characteristic pyramid-type bulges. This special 3D design ensures the particular easiness of forming the strip in each direction. Full pack contains 10 metres of the strip MATERIAL made of Aluminium lacquered with ...

... Thermoplastic waterproofing membrane with active polymer core (APC). Setting the standard for waterproofing membrane strength, durability and performance for more then ...

... 3-layer, vapour-permeable sheathing membrane with microporous film and woven grid Can be used in ventilated and unventilated roof assemblies as a trussing, sub-roof or sheathing membrane Can be used as a sub-roof glued ...

... METAL ROOFS Synthetic 3-layer breathable underlay, coupled to a 3D high density extruded polypropylene mono-filament structure and grouped in a bicuspid structure with sound-absorbing properties, protected by a second polypropylene membrane. Particularly ...

The infiltration of moisture into walls can trigger considerable direct and indirect damage that is often only detected after years. The necessary repairs are extremely complex and cost-intensive.

... premium SBS modified bitumen membrane. SCUDOELA ST P4 - installation as the bottom layer of roof cladding, for waterproofi ng of engineering structures. Can be used for the installation as two-layer foundations waterproofing. The ...

... Single-layer bentonite membrane, laminated with polyethylene foil. Purpose: Waterproofing of underground concrete structures, foundations, basements in conditions of hydrostatic pressure up to 70 m of the height of ...

... Plastobit is a fiberglass or polyester felt reinforced waterproofing membrane made of bitumen modified with APP (atactic polypropylene), the lower surface is coated with PE (polyethylene) film and the ...

... in terms of waterproofing. The main cause of worries with roof-terraces? The quality of the welding of the bitumen material on site, which weakens the tightness of the flat roof. However, there is a way to ensure a perfect waterproofing ...

Geomembrane in FPO, waterproof, decoupling, anti-fracture, elastic, flexible, deformable, crack-bridging ability and dimensional stability between -40 °C and +80 °C, for waterproof barriers on substrates of any type and size before laying ceramic, porcelain ...

... , PROFOLIO system sealing tape corners are flexible, cross stretch and backed with fleece on both sides all this helps to align the products to the nearest millimetre and provides excellent adhesion. Sealing and uncoupling membrane Crack-covering ...

... The KAB - combination construction joint waterstop is a waterstop with an integrated TPE - round swelling rubber profile used for the sealing of construction joints in concrete structures. The KAB - combination construction joint waterstop consists of ...

... Double-sided self-adhesive waterproof bituminous membrane. Quick and easy bonding of light insulating materials (glass wool, polystyrene, etc.) on substrates such as wood, metals, masonry, etc. Protects embedded pipes such as pipelines Consumption Bonding ...

... air-gap membrane that exceeds todays most demanding building codes. It has received a positive CCMC Evaluation as a stand alone Dampproofing and Drainage Layer and is presently being reviewed by the ICC-ES in the USA. DMX ...

... A high performance, self-healing membrane with a locking fleece on the inner surface and a hydrophilic polymer coating externally. The membrane is BDA approved, NHBC accepted as Type A waterproofing, ...

... Polyester fibres Packaging: 16cm/100m - 100cm/100m Reinforcement of the Murfill® waterproofing system Reinforcement of the first coat of the Murfill® waterproofing system on flat surfaces. ...

... polymer-rich SBS modified bituminous torch-on membrane with a reinforcement core of tough glass fiber, used as a capping layer in waterproofing system. The DULAS range belongs to the Elastoproof group ...

... Flexible, breathable waterproof sheet available in 50 m long and 37.5 cm wide rolls, to waterproof ridge and hip. Flexible breathable waterproof sheet available in 50 m long rolls with a width of 1.50 m to waterproof roofs. ...

... Waterproof sealing tape – shower tray installation accessory from Steigner Sealing tape is necessary for proper waterproofing of a bathrooms. The tape is made of durable polyethylene fibers. It is characterized ...

... distinguishable from Teknotan UV, which forms the top layer of the system. Teknofleece is a reinforcing membrane made from fibre glass, and is available in two densities: 100 g/m² and 225 g/m². This reinforcing membrane ...

... bitumen. The upper surface, apart from one side edge, has been coated with slate granules. The underside is covered with thin plastic film. Measurements: 1x10 m and 1x7 m Available in a range of colours. ...

... detail.If an internal and external membrane is required, in order to meet the principle of ‘inside tighter than outside’, ME220 should be located as the inner membrane and ME501 Duo Window Membrane HD ...

... Vapour-permeable wind barrier. Made of polyester nonwoven and polymer coating. Product is characterized by extreme resistance to UV radiation which allows exposure for up to 12 months. Membrane is available in SYSTEM ...

... FPO single ply roofing membrane intended for use in mechanically fastened or warm ballasted or inverted ballasted roof applications. It may also be used as the detail sheet in conjunction with Sureplan FPO Fleeceback membranes. Sureplan ...

... Fiberglass fleece 50 g/m2 , used for local and total reinforcement of the transparent polyurethane liquid waterproofing membrane ISOFLEX-PU 650 in case of local cracks, at wall-floor junctions, corners, ...

Polypropylene film, to avoid the eventuality that water or cement infiltrate the finishing screed, the interstices of the underlying layer.

... Proof Dura-Felt is a synthetic underlayment that fuses the technology of several different materials. The result is a lightweight, slip resistant product that holds up well on the jobsite and decreases installation costs. Proof Dura-Felt ...

... A plastic sheet that can be placed between the ND SM-50 Substrate Panels on medium and steep pitched roofs, thereby improving the water retention capability of the ND SM-50 Substrate Panels. Material polyethylene (LDPE) Thickness approx. ...

... DERBIBRITE NT is a waterproofing membrane composed of a copolymer bitumen with New Technologies which give it exceptional characteristics. DERBIBRITE NT is reinforced with a composite glass / polyester reinforcement ...

... Majvest® 200 The diffusion-open layer can withstand driving rain and is especially suitable for use behind sealed facades for external protection of the wall structure. 3-layer, tear-proof and flexible can be laid easily, quickly ...

... material: PVC, polypropylene fiber packing: 20 pcs. width: 220 mm length: 1000 mm ...