Asphalt waterproofing membranes

ANTIRADICE E is a high performance elastomeric prefabricated waterproofing membrane made out of distilled bitumen modified with SBS polymers and a reinforcement of heavy-weight non-woven staple polyester ...

... is a high-quality bitumen-based waterproofing membrane for flat roofs and low-sloped roofs, as well as underground surfaces like foundations, basements and pools. It is a flexible and reliable solution ...

... a self-adhesive flexible SBS elastomeric bitumen waterproofing membrane with a glass fleece reinforcement. COLPHENE® 2090 AR on the underside is protected by a silicone release film and the membrane ...

ANTIROCK® RSI membrane is a torchable partial bonded waterproofing membrane made from polymer modified bitumen (SBS elastomer) with a non-woven polyester reinforcement mesh (180g/m²). The ...

SOPRALAST membranes are composed of a glass reinforcement and SBS modified bitumen. The surface of SOPRALAST's membranes is covered with a waffled metal foil for UV protection and aesthetics. A thermofusible ...

Bituminous membrane reinforced with non-woven polyester, Startbar P is an ideal base for any roof covering.

Bitumen membrane with fibreglass reinforcement, Startbar J is an ideal base for any roof covering.

Feltbar is a traditional product in bitumen felt for temporary protection of materials and building works during the various stages of construction. It is available in versions from 700 g/m2 and from 1700 g/m2.

PRODUCT TYPE Cold asphalt made from bitumen emulsion and kaolin emulsifiers, solvent-free compatible in all mixing proportions with cement, lime and sand. APPLICATIONS Waterproofing of foundations ...

The self-adhesive pre-fabricated waterproofing membranes of the STICKER series are obtained from the layered coextrusion of special compounds based on selected bitumens modified with elastic-thermoplastic ...

BITEXTENE FLEX MT waterproofing membranes are obtained by coextrusion of a compound with a special elastomeric formulation, obtained from a complex dispersion of elastofin rubbers and copolymers in selected ...

The STAR prefabricated waterproofing membranes are obtained by coextrusion of a bituminous dispersion of micro-compatibilisers in a matrix of elastofin polymers and of a non-woven polyester reinforcement ...

Bitumen roofing tape for sealing and finishing works in flat and sloping roofs. Suitable for multiple applications and available in different colours. Bitumen-based and solvent-free product coated with a layer of aluminum. Advantages: High ...

IKO BASE P is a waterproofing membrane composed of polymer bitumen and a polyester inlay. The upper surface of this underlay is finished with sand or a thermofusible film, and the lower surface is ...

... has a long history of providing repair and protection solutions for water infrastructure projects. Our MASTERSEAL® waterproofing membranes have been specially developed to withstand chemical and mechanical ...

... traditional tiles Bituminous membrane with 3D design Thickness: 4.2 mm or 3.00 mm For new works and refurbishment For slopes up to 85° Available in 2 versions: Membrane IRT 3D ...

a waterproofing membrane, made of SBS elastomeric bitumen, reinforced with polyester felt (FP), and finished with a thermally bonded film on both the upper and lower side. Advantages · The SBS elastomeric ...

... , chimneys and skylights. Engineered for asphalt shingles, wood shakes and quarry slate roof assemblies, WeatherLock® Flex also offers: High performance Flexible and pliable poly surface and modified asphalt ...

PENEBAR SW 55 creates a physical barrier against water penetration through cast-in-place concrete joints that expand (in a controlled fashion) when exposed to water.Its superior ability to expand and seal concrete joints allows it to ...

The bitumen adhesive repair tape is a cold-applied, self-adhesive sealing tape. The surface-modified, UV-resistant aluminium film offers high mechanical resistance. The coating compound, comprising elastomeric bitumen and high-grade adhesive ...

... -applied waterproofing technology. Ideal for protected roof and split-slab deck waterproofing applications. STRATASEAL SG provides a broad range of solutions to meet specific waterproofing ...

MEMBRANE WITH LOW REACTION TO FIRE Fire resistant polymer-bitumen waterproofing membrane with harmless flame retarding additives and self-protected with slate granules. The bituminous ...

Blueskin WB Window and Door Flashing is a self-adhering membrane consisting of an SBS rubberized asphalt compound, which is integrally laminated to a blue-engineered film. The membrane ...

... and self-adhesive EPDM membrane for light coloured roofs RESITRIX® SR is a grey, hot air-weldable waterproofing membrane with a synthetic rubber (EPDM) base. RESITRIX® SR is suitable ...

... inside.Non-reinforced bituminous waterproofing membrane made of bitumen with polymer additives, with metallic self-protection, of the type LA-30/M-NA. Composition It is composed of mastic made of ...

... bitumen waterproofing membrane according to DIN 18 195. Suitable for application from + 5 °C to + 30 °C. Fields of application include basements, foundation plates, balconies, terraces or on polystyrene ...

Deacription It is a bitumen-based waterstop specially produced for cold joints. As an easy-to-apply alternative to usual waterproofing tapes, it does require additional materials. Bibaflex is not an expansion tape. Usage ...

The FLEXIMAT products are waterproofing membranes realized with elastomeric compound (BPE), with –25°C cold flexibility. The reinforcement consists in a spunbonded non woven polyester reinforced with ...

... adhered roofing systems in new construction, reroofing and recover (retrofit) applications, where the roof membrane is adhered with hot asphalt. The system must be installed over an acceptable roof insulation ...

Double-sided self-adhesive waterproof bituminous membrane. Quick and easy bonding of light insulating materials (glass wool, polystyrene, etc.) on substrates such as wood, metals, masonry, etc. Protects embedded pipes ...