Protection waterproofing membrane MP A+B

floorsfor balconyfor concrete structures

Solvent-free two-component polyurethane membrane for elastic walkable coverings. Particularly suitable for terraces, balconies and bituminous substrate coatings. Note. For the application of this product, compulsory training and relative license are required, in compliance with Reg. (EU) 1149/20 concerning isocyanates handling. Description IMPERMISIVIT MP is a solvent-free two-component product based on polyurea, to be applied in the liquid state to form a continuous elastic-tenacious coating, which withstands pedestrian transit. Use Waterproof floors for terraces, balconies and solar pavements. Waterproofing of flat roofs, eaves and ducts. Protective coating of concrete. Coating of bituminous substrates. Preparation of the support IMPERMISIVIT MP it should be applied on a suitable primer, dusted with quartz. Depending on the primer used, carry out the following procedure: PAVIWATER T68 => sprinkle with QUARZO B0 or B1 FLUIDEPOX => sprinkle with QUARZO B1 or B2 ECOFONDO PLUS or ECOFONDO ONE, sprinkle with QUARZO B1 The substrates must first be prepared with appropriate mechanical action, followed by shaving, to obtain a uniform surface. Newly built cement supports must be left to mature. Asphalt surfaces and bituminous membranes must be evaluated as consistency and treated with PAVIWATER T68 and relative quartz dust. To restore missing parts use PAVIRAPID. Application At the time of application, combine the two components in a single container and mix carefully for 2 minutes, using appropriate equipment (propeller drill).