Roof fans
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Air flow: 395 m³/h - 4,700 m³/h
Weight: 10 kg - 13 kg
Height: 550 mm - 720 mm
The industrial wind aireator is installed along the highest part of the builiding and its performance is based on the use of wind energy and in the pressure difference between the inside and the outside of the facilities. The industrial ...
The Venturi aerator allows to generate a hybrid system between static ventilation and dynamic ventilation. This is due to it can be supplied with a built-in motor that facilitates greater air extraction, although it also performs this ...
... installed along the highest part of the building and its performance is based not only on the use of wind energy and the pressure difference but also on a motor which enables the air extraction required for the building ...
The Skyflow SSF is a lightweight range of horizontal discharge roof extract units which balance the need to satisfy architects' modern day building needs against a low silhouette design, UV stabilised ...
Elta Fans
Power: 16 W
... Ventilation Fan IM 1500 converts passive gable, dormer, powered and whirlybird vents into an active, solar-powered venting system. The 16-watt solar panel sits discreetly on your roof to maintain your ...
SOLATUBE GLOBAL MARKETING INC
Air flow: 1,050 ft³/min
Height: 8 in
Width: 23 in
... ETL Listed - No Fan Blade - 4 Blade Steel HVI Certified - No Insect/Critter Screen - Yes Installation Type - Roof Mount RPM - 1000 UL Listed - No CFM - 1050 Color - Dome Dimensions - 23-1/4 ...
BROAN
... ventilation of common corridors and fire fighting lobbies. It can therefore be considered to meet the recommendations of Building Regulations (E&W) Approved Document B, BS 9991 and BS 9999 for ventilation of stair cores. Under ...
COLT FRANCE
... refreeze at the eaves where it can prevent water from reaching the gutter a problem known as ice damming, which can potentially cause water back-up and leaks. The VentSure® Solar Attic Exhaust Fan helps ...
Air flow: 0 m³/h - 27,601 m³/h
Roof unit for smoke and heat extraction + normal ventilation Horizontal exhaust Up to 400°C / 120 min (F400/120, F400/90, F300, F200) Normal ventilation up to 120°C continuous operation, up to 80°C in standstill Service ...
Air flow: 0 ft³/min - 82,481 ft³/min
Rugged, trouble-free YORK® UPBLAST ROOF FANS offer the latest axial-type design for quiet and efficient air handling, combined with the advanced engineering of the upblast stackhead for immediate dispersal ...
York
Air flow: 1,000 m³/h - 4,000 m³/h
Belt-driven smoke exhaust fan. 2 models : ProtectONE® TA (forward curve): 9 box fan sizes, airflow 1,000 to 40,000 m3/h. ProtectONE® TR (backward curve): 8 box fan sizes, airflow 1,000 ...
ALDES
Air flow: 800, 1,600 m³/h
... hazard (zone 1 and 2), Dye shop, Battery room, Workplace, Storage facility DZD 25/4 B Ex e - short description Axial roof fan, horizontal air outlet, DN 250, three-phase AC, explosion proof DZD ...
Air flow: 0 m³/h - 3,500 m³/h
Noise level: 63, 60, 65, 59 dB
Weight: 11, 12.2, 14, 20 kg
... fans are made in Europe and suit to new buildings or refurbished. VCR exhausts fans are characterized by their sturdiness due to their robust design and high quality materials. Moreover, VCR fans ...
Aereco Ventilation Limited
SE Controls’ SHEVTEC® range of fans are designed to extract hot gases from corridors and lobbies via smoke shafts. All fan sets are tested to European Standard EN12101-3 and installed as part of a fire ...
Power: 1,500 W - 18,500 W
Roof-mounted centrifugal fan for smoke extraction with vertical air discharge. Smoke exhaust fans are used in emergency exhaust ventilation systems for forced extraction of smoke and ...
Air flow: 1,450 m³/h - 24,700 m³/h
Noise level: 37 dB - 64 dB
Weight: 25 kg - 205 kg
For deck or roof mounting and suitable for: •Ventilation in general •Renovation of flawed environments in all types of buildings and industries. •Smoke extraction. •Domestic and industrial hoods. Series composed ...
Air flow: 0.1 m³/s - 3.9 m³/s
... for vertical exhaust applications. Twin vertical discharge fan also available. Provides 100% standby capacity. Shutters are standard on twin fan units and an optional extra for single fan ...
Fantech
... SPEED CONTROL - : - Speed can be adjusted using an optional Controller USES - : - Industrial applications, Duct fans, Roof fans, Centrifugal fans, Heat Exchangers, Air ...
Width: 315, 1,250 mm
Length: 315 mm
VENCO Axial Smoke Exhaust Fans are fire resistant fans used in car park and subway ventilation projects. The best matching fan is supplied in the wide range by selecting several blade- ...
VENCO A.S.
Air flow: 0 m³/s - 5.9 m³/s
High efficiency and powerful single extract fan range available in various configurations. Multiple configuration options available including internal in-line, external in-line, roof-mounted with end ...
Air flow: 55 l/s - 314 l/s
... from your fan use the Ecotronic controller Integrated component design allows all parts to be dismantled for cleaning without the use of specialist tools Easy fit connector Top Socket, standard on ...
... for F400. Declaration of performance 007-05-CPR-2015 for F600. CE Declaration of conformity W/01/A/2012. Roof smoke exhaust fans type mcr Pasat with radial rotor are designed for removing smoke ...
Mercor
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how ArchiExpo processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining