Wall waterproofing membranes

PVC tape for waterproofing systems made from liquid membranes. TECHNICAL DATA: Thickness of tape: approximately 0.7 mm. Resistance to water under pressure: 1.5 bar. Elongation at failure: > 135%. In ...

BITEXTENE FLEX MT waterproofing membranes are obtained by coextrusion of a compound with a special elastomeric formulation, obtained from a complex dispersion of elastofin rubbers and copolymers in selected ...

... install Provides superior air and moisture management for commercial and residential buildings Long-term performance Suitable for walls in timber frame, metal frame, masonry and internal insulation upgrade Properties: ...

... launched a new wall membrane composite, which will improve airtightness levels whilst at the same time addresses the need to reduce thermal bridging, particularly in refurbishment projects. Wraptherm ...

... flexible SBS elastomeric bitumen waterproofing membranes with laminated, anti-root, polyethylene film on the topside. COLPHENE® 1000 is used for buried walls, underground foundations, ...

... laminated PE foil that is 400 mm wide on one side. This makes it easy to connect to the vapour barrier in the floor or on the wall.

The infiltration of moisture into walls can trigger considerable direct and indirect damage that is often only detected after years. The necessary repairs are extremely complex and cost-intensive.

PENEBAR SW 55 creates a physical barrier against water penetration through cast-in-place concrete joints that expand (in a controlled fashion) when exposed to water.Its superior ability to expand and seal concrete joints allows it to ...

... integrate an aluminium expanded metal system in our EPDM membrane which results in a composite material of an EPDM slab with a pliable outer end, that is perfect for fitting to an inner cavity wall and ...

Self adhesive membrane in SBS elastomeric modified bitumen for below-grade walls. This product offers the qualities of HPDE without necessity of using torch. Reliable damp proof membrane ...

POLYBOND HP is a plastomeric waterproofing membrane with outstanding performance, made of a latest generation distilled bitumen-based compound modified with POLYPROPYLENE and continuous thread nonwoven ...

The world’s leading Bentonite-Geotextile Waterproofing System. More than 50 years of proven performance. Designed for both vertical and horizontal foundation surfaces, VOLTEX incorporates the high-swelling and self-sealing ...

... of the primary membrane in terms of resistance to traction, puncturing, static and dynamic, especially if the primary membrane is reinforced with Polyethylene PE (polyolefins) PE or fibre glass felt FV. · ...

... outdoor waterproofing treatment for corners between walls and floors, corners between walls and dividing joints (must not be used for structural joints) in screeds waterproofed with: ...

... rainy and windy climates. STRENGTHS This membrane is waterproof on-site.It provides expansion and tightness whatever the composition of the water it comes in contact with.It is ideal for retaining walls ...

DESCRIPTION MEL-ROL waterproofing system is a flexible, versatile, dependable, roll-type waterproofing membrane. It is composed of a nominally 56 mil thick layer of polymeric waterproofing ...

... diffusion-open layer can withstand driving rain and is especially suitable for use behind sealed facades for external protection of the wall structure. 3-layer, tear-proof and flexible can be laid easily, quickly ...

Self-resealing waterproofing stripping, self-adhesive with very strong immediate adhesiveness and high elasticity. Used cold to repair waterproofing, all work involving pointing, ridges, fillets and ...