- Building & Construction >
- Construction panel >
- Other wood panels
Other wood panels
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Thickness: 3, 4 mm
ALUCOBOND® PLUS is a composite panel consisting of two aluminium cover sheets and a mineral-filled polymer core. The superb properties of this material boost one’s inspiration and offer architecture a whole new range of solutions – whether ...
Thickness: 3, 4 mm
ALUCOBOND® A2 is our non-combustible aluminium composite panel used in architecture that fulfills the respective standards worldwide. Thanks to its mineral-filled core, ALUCOBOND® A2 meets the strict requirements of the fire regulations ...
Thickness: 6 mm - 25 mm
In contrast to conventional honeycomb composite panels, the system components of ALUCORE® are bonded in a continuous process. The material does not become brittle-hard but shows tough and resilient properties and excellent peel strength ...
Thickness: 21 mm
Admonter
Thickness: 19 mm
A: virtually knotless, occasional knot points possible, nearly no repairs, occasional sapwood possible, natural colour variations, joint-free gluing. Backing A: as above Backing B: sound knots possible, occasional dead knots, knotholes ...
Admonter
Thickness: 19 mm
A: Typical structural appearance of rift and plain cut, virtually knotless, occasional knot points possible, no brown heart, slight colour variations possible, jointfree gluing. Backing A: as above Backing B: Typical structural appearance ...
Admonter
Thickness: 12 mm
This rectangular top panel for the Montana system measures a width of 174.9 cm and is available in the depth 30, 38, and 46 cm. The top panel is made of 12 mm MDF in water-based lacquer, with rounded front and rear edges and straight ...
Thickness: 5 mm
Add back panels to change the expression of your module. The Montana back panels are easy to mount in the back end of each room in a Montana shelving module. It is your decision whether the rooms get individual colours or the same colour ...
Country / Place: - - CH/Tägerwilen Name of Project: - - Multiple Dwelling Tägerwilen Product Category: - - Perforated Facade, Stair Railings Material: - - Formboard top pine, 10mm Perforation Type: - - 50100 Colour: - - NCS ...
Bruag Design Factory AG
The new extension to Arlesheim Church, which is a listed building, has been given visual appeal through use of amorphously-perforated Formboard cladding panels. These components additionally serve to prevent glare and to provide privacy ...
Bruag Design Factory AG
Country / Place - - Schweiz/Lipperswil Name of Project: - - Dividers Hotel Golfpanorama Lipperswil Product Category: - - Garden Material: - - Formboard top pine top pine, 18mm Perforation: - - 10100 Colour: - - NCS S 8000-N Architect ...
Bruag Design Factory AG
Thickness: 8 mm - 40 mm
BE.YOND Particle board is available in our full and extensive range of decorative designs & textures. Application Low-emission base panel for surface coatings used in furnishings and interior design. The panels are suitable for non-load-bearing ...
SWISS KRONO AG
Thickness: 3 mm
The SWISSMDF Decor is a melamine-coated MDF board with a fully integrated, homogeneous material structure. The decorative panel features high strength and outstanding machining properties.
SWISS KRONO AG
Thickness: 19, 22, 25 mm
The rough-sanded SWISSPFB composite board is compacted on both sides with thin HDF coating layers. The innovative composite makes it significantly stronger and more rugged than a standard chipboard panel. Thanks to its fine surface, the ...
SWISS KRONO AG
PSB Standard is the foundation of our product range, representing the perfect balance between quality and affordability. This eco-friendly board is crafted from upcycled palm waste, offering a sustainable alternative to conventional plywood. ...
Thickness: 0.3 mm - 25 mm
Laminated wood adds an imperial charm to your furniture. It brings back life into an inanimate object with its smoothness and gentleness. That in return adds to the reflection the robust personality, down-to-earth vibe and aesthetic appeal ...
Thickness: 12 mm
Width: 1,250 mm
Length: 3,000 mm
Thickness: 4 mm - 42 mm
Top quality is our passion As an ecological pioneer, elka-Holzwerke has been offering an above-average quality standard with its branded products for decades & is committed to healthy, future-oriented wood-based materials. Extensive ...
elka Holzwerke GmbH
Thickness: 19 mm
vita quality in used look Our natural wood boards have a warm and cosy look when untreated. In furniture construction and interior design, the demand for surfaces with a used or vintage look is increasing - used wood with worn and ...
elka Holzwerke GmbH
Thickness: 19 mm
vita quality in used look Our natural wood boards have a warm and cosy look when untreated. In furniture construction and interior design, the demand for surfaces with a used or vintage look is increasing - used wood with worn and ...
elka Holzwerke GmbH
Thickness: 20 cm - 24 cm
We create high quality 3 layer barn wood panels, available in grey, brown or mix colours, ready to be used for any decoration projects.
Thickness: 20 cm - 24 cm
Custom size reclaimed alder panels available in light brown, grey or mix colours, ready to be used for furnitures and reclaimed siding.
Thickness: 20 cm - 24 cm
Reclaimed plywood in 5 layers crafted from carefully selected barn wood naturally aged, salvaged from old barns around Europe.
Description DEXcell™ BRAND Cement Roof Board is a lightweight moisture and mold resistant cement board designed for use as a coverboard and/or thermal barrier in all commercial roofing applications. DEXcell Cement Roof Board is ...
Lightweight wood-particle board with a smooth and even surface. Suitable for general use in dry environments (classified P1 according to UNE-EN 312). Service class 1. Formaldehyde emissions: Class E1. \DOMAINS: Hospitality Retail Residential CERTIFICATIONS: Environmental/Sustainability: ...
FINSA
Thickness: 16, 19, 22 mm
Fire retardant according to EN 13501-1 (B-s2,d0) and SOLAS 74/88 (shipbuilding/IMO) • Substrate board for face veneers, direct painting and high-gloss surfaces • Larger-scale wall and ceiling panels • Interior in halls, airports, ...
SWL TISCHLERPLATTEN BETRIEBS-GMBH
Thickness: 42, 35 mm
Technical class: SWP/2 NS L5 Quality classes AB/B (A/B*), B/B, B/C+
Botanic name : Quercus Origin : Europe and North America Description : heterogeneous veneer with a very nice finish. Light beige to light brown wood base, slightly meshed. Tint : T344 Slicing : quarter cut Jointing : random-matching Available ...
OBERFLEX
Innovus MFC Hydro X is a decorative wood particleboard panel with a melamine surface for indoor use in environments with high humidity levels. Easy to clean and resistant to scratching and staining, the Innovus MFC Hydro X decorative ...
SONAE ARAUCO
Thickness: 8.2 mm - 28.2 mm
FunderMax Star Favorit MDF are medium-density fibreboard panels laminated on both sides with melamine resin in compliance with the EN 622-5 standard. Laminated with melamine resin on one side upon request. Made to order – please ...
FunderMax
Thickness: 6 mm - 45 mm
Non-structural MDF board for industrial processing and interior applications MDF CE norm: L.MDF Dry conditions - service class 1 Formaldehyde class: Low Density: Standard High quality MDF board (L-MDF according EN 622-5) with ...
Unilin Panels
“WOOD EYES SURFACE” is all about knots, faults, scars, imperfections -significant moments in the evolution of a tree, all of which the wood industry today considers as waste, as problems for which it is constantly inventing ...
Thickness: 0, 0.8 in
Width: 4 in
Length: 6 in
Teragren’s strand bamboo panels and veneer are ideal for any interior use where hardwood may traditionally be used, including cabinetry, reception areas, wall treatments, furniture and more. Our Xcora strand panels and veneer machine ...
Teragren Bamboo Flooring, Panels/Veneer + Worktops
Panel two-sided is a 3-layer wood product, consisting of an mdf or plywood substrate with a Plexwood veneer on two sides Panel two-sided is suitable for both doors, furniture and dividing walls, and staircases and podia when visible ...
Plexwood
Thickness: 9 mm - 55 mm
WHAT IS DECOPANEL? Decopanel is the product group comprising veneered panels. The HPLT pressing procedure (High Pressure Low Temperature) used by Decospan guarantees the best quality for any type of panel. This unique method is the result ...
Decospan
Thickness: 20 mm - 45 mm
Cross-laminated timber (KLH®, BSP, CLT, X-LAM, Cross-Lam) is made from spruce slats stacked atop of each other which are bonded using high press force and formaldehyde free adhesives to form large-format building elements. The elements ...
DURASTEEL® is a composite board manufactured with a fibre reinforced cement core, with outer facings of 0.5mm perforated galvanised steel mechanically bonded to each surface of the core. Other steel finishes such as stainless steel are ...
Thickness: 12.5, 20, 30, 50 mm
wedi building boards have a blue core made from CFC-free extruded polystyrene rigid foam. This makes the wedi building board an ideal basis for any type of plaster and tile. wedi building boards can be applied to practically any substrate, ...
wedi GmbH
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how ArchiExpo processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining