Air flow regulator MR MONO

The MR Modulo is an airflow regulator which ensures a stable airflow. It can be adjusted on site to control IAQ, comfort and energy savings. The MR Modulo is an airflow regulator which guarantees a stable airflow whatever the pressure variation, over a wide range of values to prevent over-consumption due to excess airflow, ensure good IAQ and a high level of comfort. its membrane technology ensures low noise levels. The nominal airflow can be adjusted on site without a tool. easy to stock: just 1 product for each diameter (except 125 mm) to cover multiple airflow levels, low noise level, easy and fast to install: multiple positions and adjustments. tool-free installation and adjustment, made in France. Using its membrane the MR Modulo maintains a constant airflow in the air supply or extract circuit. The airflow value can easily be adjusted on site using a rotating ring, to cover a wide range. plastic material (M1 fire certification), silicone control membrane, support and airtight properties using double-lip elastomer seal, airflow tolerance over operating pressure range: Q average = Q nominal +/- 5 m3/h for MR ≤ 50 m3/h, Q average = Q nominal +/- 10 % for MR > 50 m3/h, temperature range: -10°C installed directly in the duct, installation direction indicated on component, horizontal or vertical installation at any angle, manual and tool-free adjustment of desired airflow by removing shim and turning rotating ring, reserve distance with a grille, T-piece or bend: 1D on extract and 3D on air supply. / +60°C.