ASMACO Weldfix is specially formulated solvent based adhesive used for cementing and joining pipes and pipe fittings made of Rigid PVC (U-PVC) & CPVC Pipes It is medium viscosity penetrating adhesive ideal for waterproof bonding and prevents leakage at extreme pressures. It is safe for drinking water after complete curing. Asmaco Weldfix®® meets the requirements of International Standards such as BS and ASTM. Grey PVC suitable for use on PVC pipes and fittings up to 12 inches.
Features :
- Easy to use
- One part application
- Safe for Drinking water after full cure
- Rapid curing
- Strong, durable bond
- Meets BS & ASTM Standard
- Grey PVC - For use on pipes upto 12" dia
Applications:
Cut pipe squarely, chamfer (15 degrees) and deburr. Insert the pipe in the fitting and mark
depth. Clean both surface ends thoroughly with Paste–it Cleanser and clean tissue paper. Stir
Weldfix® well and apply an even layer of adhesive (thin layer on fitting, thicker on pipe) in
an axial direction with a brush. Assemble the parts within 4 minutes (at 23°C) without turning and hold firmly for few seconds. Wipe off excess adhesive. Assembled joint should not be disturbed for 5 minutes (below 10°C, 15 min.). For better results put pipe into use after one hour. Replace cap tightly after use. After carrying out any welding work, pipes should be filled with water, rinsed and flushed thoroughly before using