Stand-alone solutions to manage the lighting of a single circuit in areas with and without natural light.
Switch Sensors are the suitable solution for every new service-sector room, from the smallest to the largest and can also be applied immediately in existing rooms.
The offer is made up of combined movement and lighting sensors which manage the load in On/Off. Supplied at 230 V can control all the main types of lamp on the market. Factory pre-adjustment gives immediate operation on first installation, while the availability of trimmers and remote controls means that the operation of the devices can be customised to satisfy the needs of every type of room.
The devices are subdivided into:
Basic Switch Sensors;
SCS Room Controllers and Sensors.
Advanced Switch Sensors
Suitable for the management of one circuit in areas with natural light. The advanced sensors measure the general lighting level continuously (not only the first time a presence is detected). If a presence is detected and if the lighting level measured becomes greater than the configured brightness threshold the sensor will switch the lighting off.
Advanced Switch Sensors can use two technologies – PIR and US (US technology based on sound waves). They are used in rooms with natural light such as: individual or collective offices, open spaces and meeting rooms. The loads are activated/deactivated manually (by command) or automatically on the basis of the presence detection or the lighting level. On-off mode load management.