Commercial detectors

... basic sensors only measure the general lighting level once, when movement is detected for the first time. As long as a presence is detected, even if the measured lighting level becomes greater than the configured brightness ...

... basic sensors only measure the general lighting level once, when movement is detected for the first time. As long as a presence is detected, even if the measured lighting level becomes greater than the configured brightness ...

... advanced sensors measure the general lighting level continuously (not only the first time a presence is detected). If a presence is detected and if the lighting level measured becomes greater than the configured brightness ...

The sun/twilight sensor is attached to the window-pane. It measures the light intensity and if, for example, the sunlight is too strong, will lower the blinds. How far the blinds are lowered will depend on the position ...

The glass-breakage sensor is attached to the window pane (e.g. using Loctite glass-metal adhesive set). When the pane is shattered the corresponding shutter or blind is moved into the lower end position. The glass-breakage ...

... lens with double sensors significantly improves the detection field and quality of the new automatic switches. Being able to "crawl under" this field is a part of the past with the automatic switch 2. Additional presence ...

... connected to the RMS system. The smoke detectors and the connected release and switch devices are supplied together with power from a mains rectifier 230 AC and secondary 24 V DC within a protection range. The smoke detectors ...

Reliable system with CPR certified quality Easy installation Complete system: 4 zone control unit Optical and thermal detectors Sounders and conventional optical-acoustic panels Call points with resettable elements

In order to be able to operate in a safe and stable way, each automation must be controlled and managed by a reliable programming unit that must be designed according to precise guidelines and in-depth analysis of the functions required ...

Surface mounted synchronised photocell suitable with COLL-TE. Protection against interference, anti-blinding circuit, power supply 12-24 Vca-Vdc, range up to 20 mt in all environments.

The transmitter is powered from a BAT3 battery (2 AAA LR03 of 1,5V) which it lasts up to 15 months (the range up can be selected). RX is powered 12/24 Vca-Vdc

Bidirectional transceiver (prevailing TX) for security system. 868Mhz FM. With Selftest

Vehicle detection Powerful and compact presence detector The Alphatronics vehicle detection unit with inductive loop is a powerful and compact presence detector offering a choice ...

... , Light Sensor DETECTION PIR motion sensor Detection Angle (°): 80 Nominal mounting height (m): 3 Detection diameter (m): 5 Light Sensor CONTROL Remote control: Active+ Sense ...

... iDim-Basic Mounting: Luminaire Sensors: PIR motion sensor, Light Sensor DETECTION PIR motion sensor Detection Angle (°): 80 Nominal mounting height (m): 3 Detection diameter (m): 5 Light Sensor CONTROL Remote ...

... Mounting: Luminaire Sensors: PIR motion sensor, Light Sensor DETECTION PIR motion sensor Detection Angle (°): 97 Nominal mounting height (m): 2.5 Detection diameter (m): 5.7 Light Sensor

... CHANGES Kupu 10 is the same beautiful, yet technically upgraded Kupu smoke alarm with no battery changes ever needed. KUPU 10 SMOKE ALARM by Harri Koskinen Kupu 10 Smoke Alarm ...

... beautiful, yet technically upgraded Lento smoke alarm with no battery changes ever needed. LENTO 10 SMOKE ALARM by Paola Suhonen Lento 10 is the same playful and wild, yet technically upgraded ...

The WAPIR is a ceiling mounted 360o PIR motion sensor. The WAPIR motion detector module allows scenes to be selected automatically via movement. In factory default setting, the unit will select scene 1 and off, with ...

The RAPIR is a ceiling mounted 360o PIR motion sensor with Rakom RF capabilities. The RAPIR motion detector module allows scenes to be selected automatically via movement. In factory default setting, ...

... heaters are needed more quickly than you think. Since managers obviously wish to keep consumption under control, this motion detector is the ideal solution. It "senses" that customers arrive on your terrace and activates ...

The CO2 & Temperature Sensor is used to monitor room CO2 level, as well as room temperature and humidity. Three colour (green/yellow/red) LCD backlight indicating ventilation requirement based on CO2 measurement Non ...

2 outputs - Combined CO2 and temperature transmitter It measures both CO2 concentration and temperature in the ambient air, transforms the data into output signals and sends these values to an SE Controls control system Optional integral ...

SE Controls Humidity Sensor is an active sensor that measures relative humidity within a room and converts the reading into a 0-10v ouput.

... valuable assets. Active infrared beams utilise point to point detection to provide a high level of security for many commercial applications, for example: external perimeters or fence lines, large internal perimeters ...

... provide IR control of a motorised application. The control unit can be hidden away with only the sensor visible. Technical characteristics IR 3 infrared sensor Color / Finish :white Width :47 mm Height ...

FLOOD ALARM - WHITE - IP20 - BATTERY OPERATED - ZIGBEE A system of command and control wireless devices, based on ZigBee technology, that offers innovative solutions for the renovation of buildings, minimizing the structural interventions. ...

... seamlessly with i-Vu® system alarming for proactive monitoring of important sensor conditions, including: • Sensor charge level • Sensor signal strength • Sensor offline

Radio Powr Savr wireless occupancy/vacancy sensors provide convenient light control and are engineered for optimum energy savings and easy installation. Radio Powr Savr wireless sensors save energy by ...

Crestron Green Light® sensors deliver a powerful and cost-effective solution for reducing energy costs and enhancing the functionality of lighting and environmental systems. The GLS-OIR-W-2500 is a wall or ceiling mount ...

For receiving IR signals transmitted from IR wall-mounted transmitters or IR hand-held transmitters Conversion of IR signals received from up to 32 IR channels into bus telegrams Configurable evaluation of the IR signals per IR channel ...

... the product transmits a radio alert signal (indicated by a warning light). The rain sensor includes a heating element which automatically dries the surface of the sensor after detection, preventing false ...

Energy-harvesting high quality designed radio room sensor for measuring temperature and relative humidity in living and office space. The device sends its measured values unidirectionally to corresponding receivers or ...

... terraced houses. Sure's sure. The two models Busch-Watchdog 70 MasterLINE and Busch-Watchdog 110 MasterLINE are movement detectors with a reduced detection range. This makes them ideal for use in small terraced houses. ...