Home automation system switch RF-RELAIS

automaticremote-controlledrecessed

The RF Relays are radio switches for the Solexa II, WS1 or WS1000 Color/Style Control Systems. Lights or pond pumps are examples for devices that can be run at the radio relays. A consumer load connected to one of the relays may also be switched directly with the Remo 8/pro Remote Control, the RF-B2-UP Push Button Interface or the Corlo P RF Solar Push Buttons (without any further control device). Models: N° 60534 RF-Relay-UP, Radio Relay potential-free N° 60536 RF-Relay-ST, Radio Relay 230 V, plug connector housing N° 60530 RF-Relay-N, Radio Power Outlet Radio relay for Elsner radio protocol Reception of the control signal via radio RF-Relay-UP: 1 potential-free relay contact (normally open contact) Suitable for: WS1 Color, WS1 Style, WS1000 Color, WS1000 Style, KNX WS1000 Style (as of software version 1.03). Remo 8 (as of version 0.1), Remo pro RF-Relay-ST: 1 connection 230 V Suitable for: WS1 Color, WS1 Style, WS1000 Color, WS1000 Style, KNX WS1000 Style (as of software version 1.20). Remo 8 (as of version 0.1), Remo pro, RF-B2-UP, Corlo P RF RF-Relay-N: Radio power outlet, to be plugged to a 230 V mains power outlet (CEE 7/4) Suitable for: WS1 Color, WS1 Style, WS1000 Color, WS1000 Style, KNX WS1000 Style (as of software version 1.20). Remo 8 (as of version 0.1), Remo pro, RF-B2-UP, Corlo P RF Radio frequency 868.2 MHz RF-Relay-UP: Mounting Flush-mounting Protection category IP 20 Dimensions approx. 38 x 47 x 29 (W x H x D, mm) Weight approx. 60 g Ambient temperature Operation -20…+70°C, Storage -55…+90°C Operating voltage 230 V AC Output potential-free, can carry up to 2 A / 250 V max.