Weather sensor/combined sensor: sun sensor, electronic wind sensor, rain sensor, thermometer, GPS receiver
Slim design, unobtrusive on the façade
The Weather Station P04-KNX-GPS for the KNX building bus system measures temperature, wind speed and brightness. It recognises precipitation and receives the GPS signal for time and location.
The compact housing of the P04-KNX-GPS accommodates the sensors, evaluation circuits and bus-coupling electronics.
KNX weather stations with sensors for brightness, wind, precipitation, temperature. Time reception via GPS
Brightness measurement
GPS receiver, outputting the current time and location coordinates
Wind measurement: The wind strength is measured electronically and thus noiselessly and reliably, even during hail, snow and sub-zero temperatures. Even turbulent air and rising winds in the vicinity of the device are recorded
Precipitation detection: The sensor surface is heated, so that only drops and flakes are recognised as precipitation, but not mist or dew. When the rain or snow stops, the sensor is soon dry again and the precipitation warning ends
Temperature measurement
Configuration is made using the KNX software ETS
Wheater Station:
Housing
Plastic
Colour
White / Translucent
Assembly
Surface mount
Protection category
IP 44
Dimensions
approx. 62 × 75 × 155 (W × H × D, mm)
Connection cable
4-wire (bus +/-, auxiliary voltage +/-),
diameter approx.
5 mm
Weight
Weather station with mounting approx. 90 g,
total weight with accessories
approx. 280 g
Ambient temperature
Operation -30…+50°C, storage -30…+70°C