Gasoline engine walk-behind cultivator PRINCESS M1 / MR / MP3 / MP3 PRO

Gear housing in press-formed plate sections secured by bolts Belts in kevlar (high performance) Handlebar easy to control and fully adjustable Rotary tiller with 6 hoes plus disks (total width 80 cm) Front transport wheel supplied as standard Grillo rotavators Princess M1, Princess MR and Princess MP3 are reliable, safe and well-balanced. These models all have a belt-to-chain transmission: the M1 model has a single speed, the MR model has one forward and one reverse gear while the MP3 model has two forward gears plus one reverse gear. The tiller is 83 cm large and is composed of six tine-holders with side discs. It is possible to quickly remove two or four tine-holders to narrow the tilling width. The tempered-steel hoes can be easily dismounted. The height and side position of the handlebar can be chosen through levers without loosening screws or turning knobs. It is therefore easier to work between plants and to avoid branches and obstacles The rotavator Princess MP3 can be equipped with the plough kit which contains a furrow plough, a pair of wheels and of wheel weights. The front transfer wheel is equipped with a spring device that blocks it automatically into the working position or into the transfer position. Active coupling. When the lever is released the hoes stop immediately while the engine keeps on running. This ensures maximum handiness and greater safety. Three petrol engines re available: 3000 Kohler (see pic.) – Honda GX 160 The tiller has a width of 83 cm and can till the ground up to 32 cm deep. It is composed of six tine-holders plus side discs and is tightly fixed to the tiller axle through M10 bolts. Tines are made of tempered steel.