PVD coated stainless steel look, cubic
Flow rate 5 l/min
Mains operation 230 V
For cold and mixed water
Cold water: 3/8" T-distributor required, see accessories art. no. 65755
can be used with backflow preventer with dirt filter, see accessories art. no. 70247
Laminar jet regulator with dynamic flow rate control 5 l/min, angle adjustable and theft-proof
Adjustable, active, false trigger resistant infrared sensor system
Electronic module with adjustable detection range, hygienic flushing, continuous flushing and cleaning mode
Sensor parameters factory-set: follow-up time: approx. 1-2 s, continuous operation: 4 min, detection range: 200 mm, cleaning mode: 60 s, hygienic flushing is deactivated
Asymmetrical detection range, stable object detection
Settings and service also possible via app on smartphone, see accessories art. no. 65713
Safety cut-out in case of operating voltage failure, user-defined settings are retained
Without temperature adjustment lever: High hygiene, vandal and misuse proof
the preset temperature lies in the comfort zone of 30°C to 36°C
Temperature can be set and adjusted easily during assembly thanks to access on the side
Connection via flexible pressure hoses with interwoven hot/cold marking 450 mm long, G 3/8"
integrated dirt strainers
Brass fitting body
145 mm high, 193 mm projection
rigid spout
without drain set
Noise class 1
suitable for thermal disinfection according to WRAS
corresponds to DIN EN 15091
WELL Label in preparation