FOR INGREDIENT-RICH HARDWOODS
For ingredient-rich hardwoods such as Teak, Walnut, Cedar, Iroko, Mahogany etc.
Penetrates deeply
Protects against wear, dirt and moisture
Resistant to common liquid spillages such as water, juice, tea, cola and wine
No primer necessary, not even in bathrooms or kitchens
Saliva-resistant and sweatproof, suitable for children’s toys
Microporous, breathable finish which does not crack, peel, flake or blister
No sanding necessary for spot repairs or future applications
SURFACE PREPARATION
Wood surface must be clean, dry and frost-free (moisture content max. 18%).
Osmo Wood Wax Finish Clear Extra Thin is ready to use. Do not thin. Stir well with a flat stirring stick or spatula before use.
Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler).
If possible, please apply the first coat to all sides before installation.
Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring 120-150, for furniture P220-240. Before oiling the surface, remove sanding dust with a soft brush or vacuum.
The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.
FINISH
Clear Satin
APPLICATION TOOL
Osmo Flat Brush
RECOMMENDED USE
Indoor oily and resinous hardwood surfaces
RECOAT
One coat, when signs of wear become visible
SIZES
5ml, 125ml, 750ml, 2.5L
DRY TIME
12 hours
CLEAN UP
Osmo Brush Cleaner
COVERAGE
24m²/L with one coat