Wood coatings

protects against the discolouration and decayof all types of exterior wood. Application in a single coat is guaranteed, with excellent coverage: +/- 30m² per litre. The protected substrate is quickly maintained withoutsanding. ...

SYNTHETIC PLASTER WALL AND WOOD SPREADABILITY EASY WITH HIGH POWER FILLER, EASY SAND. QUICK DRYING. SYNTHETIC PLASTER WALL AND WOOD SPREADABILITY EASY WITH HIGH POWER FILLER, EASY SAND. QUICK DRYING.

... , VERY GOOD AND EASY SPREADABILITY, EASY SAND. SURFACES FOR INTERNAL AND EXTERNAL MASONRY, CONCRETE, IRON, GALVANIZED IRON, WOOD AND SUITABLE FOR ELECTRICAL BOOTHS, COLD, METAL FURNITURE, AND REPAIR OF TANKS CONTAINING ...

... power required for outdoor resistance and to protect the wood against pollutants, even in harsh environmental conditions, remaining unaltered despite the natural structural variations of the wood. MARCONOL ...

... water vapor, which can greatly reduce humidity and condensation problems in old buildings so mainly renovations. Lime-based coatings are "living". They adapt to their environment and their tone changes depending on the ...

... permeable to water vapour. Adheres perfectly to various supports such as bituminous sheaths, concrete, asbestos-cement and wood.

... furniture. The advantages of the Creatina limestone coating: Natural VOC-free coating based on powdered limestone Endless possibilities for finishing textures and colours Easy to apply with roller, ...

... fibre-reinforced smoothing compound for interior smoothing and levelling of thicknesses from 3-10 mm on existing and new wooden and timber floors, wooden boarding, chipboard panels and ...

It is a cementitious overlay, but provides a choice of finish effects including wood, ceramic, resin or bespoke Microbond® easily renews surfaces, both horizontal and vertical, customizing them following styles and flavors, ...

... as a cold-applied primer, to increase adherence for bitumen-based waterproofing membranes. It's also used as a bituminous coating for buried walls and foundations. Advantages: - solvent free (COV), - tools can ...

AQUADERE® STICK is a ready-to-use cold-applied bitumen emulsion primer (solvent free). AQUADERE® STICK is specially used for self-adhesive waterproofing membranes. Advantages: - solvent free (COV), - tools can be clean with ...

... SOPRADERE must be applied with a brush or a roller onto dry, clean surfaces, free of all dust and non-adhesive parts (concrete, wood, metal ... previously degreased). Let dry completely before apply the waterproofing ...

Specially formulated for wood, Thompson's® WaterSeal® Advanced Natural Wood Protector provides one-coat maximum strength protection with a coating that resists mildew and UV damage, ...

For washing wooden floors with an oil or lacquer finish. Floor Soap dissolves dirt quickly and effectively. It dries quickly and does not leave any soapy residue on the surface. Wash the floor as needed.

Two-pack filler paste, easy to work, based on unsaturated polyester resins, suitable to carry out works on wooden surfaces, like the reconstruction of defective parts even of big dimensions, fillings, trimmings, etc. ...

... semi-gloss finish, specially formulated to provide excellent flow and leveling. This highly durable and lustrous finish is ideal for wood siding, trim and sash, shakes, and shingles. It can also be used on exterior masonry, ...

A clear protective coating for Benjamin Moore ARBORCOAT Translucent (623) and Semi Transparent (638) stains on deck surfaces Provides a low-lustre finish over ARBORCOAT Semi Solid (639) Functions as an annual refresher ...

Description BioRid is a waterborne functional coating containing micropores, which eliminate moisture and keep the surface dry. BioRid is especially suitable for new and previously painted surfaces in conditions where ...

Pseudoplastic coating with capillary breaking properties Applications GUTEX Streichdichtung is a pseudoplastic coating with capillary breaking properties. It forms a coat over GUTEX wood ...

... and additive-based primer paint to improve adherence. Application PIBIAL is used in the preparation of concrete, metal or wood surfaces to be waterproofed with self-adhesive or heat-applied bituminous membranes in order ...

is an acrylic, coloured undercoat for wood ideal for use as a base for final coats of enamel. The product is easy to sand and makes the absorption of the wood even covering any imperfections on the surface. ...

Range of uses For spotting of small holes and scratches, filling of new wood as well as touching up of scratches on well-primed metal. In case of particularly deep holes, it is more effective to use Jansen 2-Component ...

... exterior use. Fills properly, dries quickly, is easy to sand and gives a smooth surface. Used to filling and coating plaster, walls, concrete, wood and for decorative applications. White water-based ...

... TYPE OF SUBSTRATE Porous mineral substrates such as screeds, concrete, mortars and cement plasters, as well as asphalt and wood. WARNINGS Do not use in tanks for drinking water.