Plaster coatings

ACRYLIC WALL COATING. Thixotropic 1 component product, easy to be applied, based on a waterborne elastomeric acrylic co-polymer. By the evaporation of the water the coating becomes very flexible and with ...

is a cement coating that is applied to low thickness (from 1 mm to 3 mm) on damaged or severely deteriorated concrete of external surfaces. The correct application of the product guarantee the protection of the the surface ...

... cementitious based plaster, with colour, 5mm thick. The coating has a similar finish to either Paris stone (fine texture) or Morelia (coarse texture). It is for indoor and outdoor use exclusively on ...

... water-repellent and breathable; it is recommended for application on both old and new lime-based or cement-type building plaster of all kinds. Product resistant to algae and mould growth.

... good workability. Suitable for: rough surface, lime and cement based surfaces and thermal insulating plaster (type Isolteco®), thermal dehumidifying plaster (type Isolsan) and restoration cycles (type ...

... one-component, water-borne, functional, anti-condensation coating for airless application. PRODUCT FEATURES Suitable for interiorpainting of mineral walls and ceilings, such as concrete, plaster, bricks ...

DESCRIPTION C8 is a ready-to-use plaster, made from gypsum, lime hydrates, perlite, selected sands and additives chosen to improve the workability and adhesion. PACKAGING Humidity-resistant paper bags - 30 Kg. Bulk in auto-silos.

PC® 78 is a factory-produced top coating on the basis of a saponification-resistant synthetic resin dispersion and finely ground marble. The fully mixed PC® 78 top coating is applied to a bearing ...

Special micromolecular coating for swimming pools TEXCOAT POOL is one-component micromolecular coating with modified acrylic resins, highly resistant in direct and permanent contact with water. Advantages - ...

... hardwoods. Perlite based plaster has endless unique properties accounting for its ready acceptance and widespread use by many leading architects, general contractors and plastering contractors. Advantages Lightweight: ...

... and interior surfaces (plaster, concrete, facade thermal insulation systems), especially for areas with high humidity and environmental pollution. Certified with the CE marking according to EN 15824. The acrylic silicon ...

Gypsum mortar for jointing plasterboards without reinforcing tape Intended for jointing plasterboards with properly shaped edges without the use of reinforcing tape (reinforce non-factory, cut edges). Can be also ...

Lime mortar for wall covering and decorating. Outdoor and indoor. Composition Aerial lime based product, with balanced grain size distribution aggregates and other additives. Features and applications High adherence. To ...

CP470 is a water based flexible coating system, formulated to provide effective protection to plaster and masonry as well as for as a protective and decorative coating to soffits, walls ...

... very porous substrates (cardboard, paper, light kinds of woods), diluted on substrates with different absorption capacity (plaster, wood-fibre boards, …). Sealer: undiluted on exotic wood, aniline colours and surfaces ...

... great penetrability on the substrate, achieving as a result a solid base with a preventative and curative effect on cement, plaster and other surfaces, which are to be painted.

... when it is absorbed by the surface it is applied. Usage Areas It is used on all types of concrete surfaces; mineral plasters; highly absorbant surfaces such as gas concrete, bricks, roof tiles, terra cotta, travertine, ...

... particularly workable and easy to lay down. RASAGYPS is a finishing product for interiors applicable to any type of bottom plaster based on gypsum or lime/cement, both for walls and the ceiling, without ...

Skin coat putty with fine plaster effect, for exteriors and interiors. Use F 263A is used as a white filling undercoat and it is particularly suitable to cover small imperfections on wall surfaces giving a fine plaster ...

Two pack special putty for interior (Νο20 + Νο200) and exterior use (Νο60 + Νο600). Applied with spatula and spray gun. It has good filling properties, it is easy to sand and gives a smooth surface.

This antique finish is speckled with treasures from deep, uncharted seas, casting a soft, opalescent glow in the spaces it inhabits. Basecoat: antico base coat Topcoat: rosso M037

RUREWALL COAT 30 is a new generation monomer silanes with low molecular weight, which penetrate deep into the material to be treated, without changing its external appearance and vapour permeability, forming a barrier against water penetration.