TINTED UV PROTECTIVE FINISH
Very water and dirt resistant
Reduces wood swelling and shrinkage
Resists growth of algae, mildew and fungal
Microporous, breathable finish which does not crack, peel, flake or blister
No sanding necessary for future applications
FINISHES
Spruce (Satin), Oak (Satin), Larch (Satin), Douglas Fir (Satin), Cedar (Satin), Natural (Satin)
APPLICATION TOOL
Osmo Flat Brush or Microfibre Roller
RECOMMENDED USE
Vertical wood surfaces in outdoor areas
RECOAT
One coat, when signs of wear become visible
SIZES
5ml, 125ml, 750ml, 2.5L
DRY TIME
12 hours
CLEAN UP
Brush Cleaner
COVERAGE
18m²/L with one coat
COATS
2 coats
CARE
Osmo Spray Cleaner (Exterior)
SURFACE PREPARATION
Wood surface must be clean, dry and frost-free (moisture content max. 20%). UV-Protection-Oil Tints is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use.
If possible, and if the wood is absorbent, please apply first coat to all sides before installation.
For renovation works, clean old microporous stains thoroughly – if necessary sand lightly. Clean and restore already greyed or weathered wood at the same time with Osmo Wood Reviver Power-Gel. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works.
Do not sand smooth surfaces finer than grit P120.