Industrial use container STANDARD

for construction sitemodular

The Standard Module is the base and starting point for all our Modular Construction products. This is the most economical module and can be used temporarily or provisionally for up to 24 months, and therefore is exempt from complying with the DB-HE Energy Efficiency. Whether it is used as a Single Module or in Modular Buildings consisting of several units, it is an excellent solution to provisional offices, toilets or changing rooms or site huts, and has outstanding versatility, fast assembly and durability as it is made with top quality materials. Standard Modules can be joined horizontally in any direction, and 2 can be stacked vertically without reinforcement. For higher buildings, the pillars are reinforced according to the structure calculations. The construction system of the Standard Module is detailed below: STANDAR MODULE CHARACTERISTICS FLOOR FRAME: Formed by cold-formed profiles in galvanized sheet. Folded Omega purlins in galvanized steel are fitted transversally to provide the unit with a resistance to service loads of 250 kg/m2, and stability against vibrations. A water-repellent chipboard (19 mm) is placed on top with the sheet of vinyl flooring. A phenolic board can be used on request. PILLARS: Pillars are formed by folded asymmetrical profiles in galvanized steel 2 mm to 3 mm thick. ROOF FRAME: Formed by cold-formed profiles in galvanized sheet. Galvanized Omega profiles are fitted transversally for purlins to support the trapezoidal sheet (0.6 mm thick). They also provide mechanical resistance and give the two sides of slope to the roof, with water channelled into 2 gutters and downpipes in PVC.