Plywood formwork board 3-S

plywood formwork board
plywood formwork board
plywood formwork board
plywood formwork board
Add to favorites
Compare this product
 

Characteristics

Material characteristics
plywood

Description

The 3-S panel is the traditional formwork panel and comes mainly from bridge construction. The inherently stable panel has a melamine resin coating and is wbp-bonded (water boiled proofed). Dimensions of up to 5 m x 2 m and special thicknesses can be supplied upon request. It is used both for walls and slabs, the concrete finish shows a timber structure. 3-S panels with a width of 0.5 m are available either in yellow without edge protection profile or in red-brown with front-end aluminum edge protection profile. Type of wood: spruce veneers throughout Coating: both sides coated with melamine resin Bonding: WBP–bonding Application: wall and slab formwork panel, concrete finish with slight timber structure Nominal ThicknessDimensionsWeightPackaging Unit 21 mm1500 x 500 mm9,50 kg/m²100 pieces 21 mm2000 x 500 mm9,50 kg/m²100 pieces 21 mm2500 x 500 mm9,50 kg/m²100 pieces 21 mm2000 x 1000 mm9,50 kg/m²50 pieces 21 mm2500 x 1000 mm9,50 kg/m²50 pieces 21 mm3000 x 1000 mm9,50 kg/m²50 pieces 21 mm2500 x 1500 mm9,50 kg/m²50 pieces 21 mm5000 x 1000 mm9,50 kg/m²25 pieces 21 mm5000 x 2000 mm9,50 kg/m²10 pieces

Catalogs

No catalogs are available for this product.

See all of PERI S.A.S.‘s catalogs
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.