Decorative varnish ESMALTE DIRECTO OXIDO

protectivefinishingfor metal

Water-based enamel with great resistance and protection for metals. 3 products in one: direct to rust as it includes rust neutralizers to be applied on oxidized metal. Antioxidant (no primer needed). Contains anti-corrosive protectors to prevent metal oxidation both at the time of application (flash rust) and due to exposure to the exterior over time. Decorative finish. Very easy to apply and maintain. Low odor. applications Indoor/Outdoor Iron Aluminum Steel How to apply? Brush Roller Airless spray gun Air mix spray gun Airbrush Low-pressure turbo Colors White, Black, Carriage Green, Spring Green, Anthracite Gray, Luminous Blue, Tobacco, Suede, Royal Yellow, Bright Red • Stir the product until perfectly homogeneous. - Apply on clean and dry substrates, removing dirt with degreasers or detergents and clean water. - Apply following the rules marked in the attached application chart. - Do not apply the product at high temperatures or on surfaces exposed to strong sunlight. - Do not apply with relative humidity above 80%. - New metals: clean, degrease, and remove any poorly adhered residues. For light metals and galvanized, check adherence beforehand. • Rusty metals and painted metals: clean and previously remove poorly adhered residues. • Apply between 4 and 5 coats minimum, one vertically and the other horizontally to compensate for irregularities in the support or possible defects derived from a faulty application, ensuring a minimum dry layer thickness of 130 microns to optimize results, at intervals of at least two hours between coats.