Priming water with high adhesion to apply to anchor superficices difficult as galvanized , ferrous and non-ferrous metals , plastic, pvc ... and others like wood, plaster , cement ...
applications
• Indoors/Outdoors
• Construction
• steel
• Aluminum
• Iron
• Plastic.
• Galvanized ironi
• cupper
• Wood
How to apply?
• Painting brush
• Roller
• Air-less gun
• Air-mix gun
• Aerographic gun
• Low preasure turbo
Colors
White
- Remove the product until its perfect homogenization. - Apply on clean and dry substrata, eliminating the dirt by means of desengrasantes or detergents and clean water. - Apply following the norms marked in the attached picture of application. - Not apply the product to high temperatures nor on exposed surfaces to strong insolation. - Not apply with relative humidities superior to 80%. - In light metals and galvanized take out perfectly the grease and Verify adhesion. - Apply 2 coats, the one of them in vertical sense and other in horizontal to compensate irregularities in the support or possible defects derived from a defective application, assuring therefore a minimum thickness of primer layer. - Respect the minimum and maximum intervals between layers. - Respect recommended the maximum and minimum thicknesses of film taking care of the yield.
- Not apply on supports wet by the low nocturnal temperatures (matinal dew), nor reheated since it can affect the quality short and long term of the product. - Maximum Time of storage: 24 months from its manufacture in its perfectly closed original package, under cover and to temperatures between 5º and 35ºC.