Sealing varnish MICROCEMENT PROTECTOR DECO MAT

acrylicfor woodabrasion-resistant

Aliphatic acrylic-urethane varnish for the protection of Microcement Ó Deco. Excellent transparency during application and once dried. Suitable for walls and decorative furniture. applications Indoor Ideal for varnishing Microcement Ó Deco in less demanding uses. Applied over Microcement Sealer. How to apply? Brush. Roller. Air mix spray gun. Airbrush. Colors Colorless • Environmental conditions: • It is advisable, especially indoors, to have air renewal. • Room temperature: 5-35 °C. • Relative humidity (RH): ≤ 75%. • Substrate temperature: ≥ 7°C and 3°C above the dew point. • Mixing preparation: • By manual or slow mechanical agitation, homogenize the MICROCEMENT PROTECTOR DECO. • Add the amount of water according to the application method and the surface to be varnished. • Control the speed to prevent the mixture from acquiring excess air. • Dilution: • For walls and roller application, a maximum of 10% water. If spraying, an additional 5% can be added. • For floors and roller application, it is possible to increase the dilution by an additional 5%. If spraying, an additional 5% can be added. • Distilled water in all cases. • Application conditions: • Wait at least 4 hours, and no more than 24 hours, from the application of the last coat of MICROCEMENT SEALER before starting to varnish with MICROCEMENT PROTECTOR DECO. • The recommended thickness per layer is between 40-50 microns dry. • In all applications, make sure not to leave more than 110 g/m2 of product. • 2 coats. For greater resistance, a third coat can be applied.