Finishing coating MICROCEMENT BASE

smoothingindooroutdoor

It is a cementitious mortar that is part of the set of products of the Microcement Ó deco system. Its function is to regularize the support, prior to the application of Microcement Walls or Floors. It can be used as a finishing microcement, with a rustic finish. applications • Indoors/Outdoors • Usual work surfaces with poor planimetry: plaster, cement, plaster, tiles, plasterboard, old paintings in good condition, etc. Suitably primed according to their absorption. • On supports previously painted with primer • Environmental use: Only specialized staff How to apply? • Stainless trowel Colors White - Environmental conditions: - It is recommended, especially indoors, that there be air renewal. - Ambient temperature: 5-35 ºC - RH ≤ 75%. - This range must be maintained during the first 72 hours. - Substrate temperature ≥ 8ºC and 3ºC above the dew point. Essential to avoid condensation. - Variations in ambient temperature during the application process also alter the setting and drying times of the material. Below 20ºC, the drying time increases. - Preparation of the mixture: - In the empty bucket included in the pack, pour the previously shaken MICROCEMENT RESIN TR. The proportion is 15 Kg Part A (Powder) + 5 Kg Part B (Resin TR) - Sprinkle little by little and beat by mechanical stirring until obtaining a homogeneous paste free of lumps. -Application conditions: - Apply with a steel trowel with rounded edges, in thin layers, 2 to 3 layers depending on the application, leaving 2 to 3 hours between coats, until a smooth and level surface is achieved. - The recommended thickness per layer will be between 0. 6 mm - 1.00 mm.