Smoothing coatings

Wall2Floor Easyflat is a levelling cement mortar with low retraction, made up from selected natural sands, binders and special additives, which guarantee perfect adhesion to thesubstrate and excellent workability. Wall2Floor Easyflat ...

Marmorino KS is a lime-based plaster coat for smoothing and finishing with a satin effect for interiors and exteriors; it is made of well seasoned hydrated lime putty, fine marble powders, and rheologic modifiers which ...

... natural sand, binding agents and special additives for a perfect adherence with the substrate and a perfect workability. Smoothing product for horizontal and vertical surfaces. After treating the surface with a suitable ...

... of the surface caused by patching or superficial inhomogeneities of previous coatings. Suitable as a smoothing finish on surfaces where previously have been removed old coatings or paints. With ...

ACRISYL KP 1 is an outdoor wall coating with an acrylic-siloxane binder base, excellent resistance to water and permeability to vapour, with a compact finish. It creates a rough layer resistant to the aggressive action ...

ACRISYL KP 1,5 is an acrylic-siloxane binder based exterior wall covering that has good water vapour permeability, excellent water repellency and a compact effect. It creates a thick rough layer that is resistant to the effects of the ...

Micro-cement coating with high workability, to create different aesthetic effects on walls or floorings, both in internal or external environments. Micro-cement coating, to be used as finish or as ...

Ultra fine skim coat to smooth plaster to create perfectly smooth surfaces, mainly inside. Ultra fine finishing to create white an perfectly smooth surfaces. The product is based on hydrated lime, micro crystaline sands, marble powders ...

is the three-component decorative system for continuous resin surfaces in residential and commercial environments. The system consists in a range of stratified products, combined to obtain a series of different effects and finishes. The ...

is the three-component decorative system for continuous resin surfaces designed for use in residential environments. As in the previous case, the system is composed of a range of water-based products stratified and combined with each ...

Mineral self-levelling compound, super-fluid with compensated shrinkage, specific for the regularisation of cement screeds made with G-COMFORT system before laying G-TEX geomembrane.

Two-component, colored, polyurethane coating without solvents, with excellent resistance to UV radiation. DUROFLOOR-PU is used as a coating on concrete floors, cement screeds, etc. Certified according ...

One-component, transparent, polyurethane impregnation for sealing concrete floors or screeds. Used also as a hardener on brittle floors and surfaces, in order to increase their strength and wear resistance. Suitable for basements, warehouses, ...

... radiation (UV), especially if a dark final color is desired. Suitable also in cases where the polyurethane waterproofing coatings are subject to pedestrian traffic and light vehicle traffic (e.g. parking lots). Color: ...

Ultima light Dustbuster from Panel Rey® is a multipurpose joint compound that is easy to apply and has an excellent finish. It produces less dust in the air during sanding, reducing the impact in the Interior Air Quality. It is specially ...

This product is designed for treating fasteners and finishing joints and corners between gypsum boards in walls and ceilings, as well as for applying finishings, textures and making small repairs to gypsum walls. It leaves a smooth ...

Ultima Plus Compound is designed for treating fasteners, plastic a metal accesories and gypsum boards joints in walls and ceilings, as well as for apply finishings and textures. Is 20% lighter than traditional compounds and it offers ...

... thixotropic, with normal setting and compensated shrinkage, suitable for high-resistance regularisation, correction and smoothing of irregular cement surfaces. For 1-25 thicknesses. For indoors and outdoors.

Mineral gypsum-based smooth compound, guaranteed for smoothing and levelling gypsum walls and substrates. For 0-3 mm thicknesses. For indoors.

Gypsum-based filling mineral stucco, self-adhesive, suitable for smoothing sealant to finish gypsum, gypsum block, plasterboard walls and surfaces on cementitious substrates and for repairing small holes and cracks even ...

... water vapor, which can greatly reduce humidity and condensation problems in old buildings so mainly renovations. Lime-based coatings are "living". They adapt to their environment and their tone changes depending on the ...

High resistance to the atmospheric agents for all plastered facades White cement-based, elastic breathable, waterproof, mineral organic levelling compound ideal for repairing and protecting facades. Where to use it Cracked plaster Plaster ...

... without finishing Cement coating is the product of choice for those looking to create depth using and unrefined, sculptural matt effect. The mineral colours (the paste is colour impregnated, as it is for all our decorative ...

... material and determine its matt, satin or gloss aspect. A good finish is an essential element for the sustainability of a coating, and allows easy maintenance. MA’s varnishes, in aqueous phase and certified A +, are suitable ...

... self-levelling, fibre-reinforced smoothing compound for interior smoothing and levelling of thicknesses from 3-10 mm on existing and new wooden and timber floors, wooden boarding, chipboard panels and ...

Self-levelling, epoxy finish coat with a coloured granular effect, to create floors which are resistant to abrasion. Mapefloor I 320 SL CONCEPT is used to dress floors in both industrial and civil environments subject to medium-heavy ...

Two-component aliphatic, coloured, UV-resistant, elastic, polyurethane, self-levelling resin to form the coating systems MAPEFLOOR COMFORT SYSTEM AL and MAPEFLOOR COMFORT SYSTEM AL/X. Available only upon request. TECHNICAL ...

A light and particularly efficient pre-mixed dry mortar on proven plaster gypsum basis with special light aggregates for smoothed interior surfaces. Plaster for creation of smoothed, freely-structured or levelled surfaces for interior ...

Polymer modified render for internal/external wall insulation systems. Mapetherm AR1 is used for bonding and smoothing floors and ceilings in interiors and exteriors insulation boards (made of extruded/expanded polystyrene, ...

INDUSTRY POLYURETHANE SYSTEM SLIP RESISTANT Pigmented polyurethane based litter layer with top coat for medium to high mechanical lo

Self-leveling coatings are made of epoxy resin. They create a continuous floor, capable of self leveling during the hardening phase. The surface is also characterized by having the same qualities of mechanical and chemical ...

Description ProForm® BRAND FasTrack® Plus Compound is a fast-setting/hardening, sandable compound which is 30% lighter than conventional FasTrack. Thus, it requires less time and effort to work. Basic Uses FasTrack Plus Compound is ...

Smoothing and Finishing Compound for Concrete Surfaces Tilt Finish is a versatile, fast-setting, polymer-modified material utilizing a proprietary blend of cements and additives. It is ideal for producing a smooth finish ...

Best alkyd for excellent weather resistance and durability. Alkyd Exterior is our best alkyd semi-gloss finish, specially formulated to provide excellent flow and leveling. This highly durable and lustrous finish is ideal for wood siding, ...

Non-toxic, resiniferous monocomponent stucco, obtained mixing polymers with quartzes and natural silica. Purpose Surface general smoothing: shops, showrooms, residences, etc. It can be applied on concrete, plaster, asphalt, ...

Putty paste, ready to use, easy to apply,fast drying and good sandability. Suitable for inside levelling and smoothing on wood, walls and drywall.