{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
A light and particularly efficient pre-mixed dry mortar on proven plaster gypsum basis with special light aggregates for smoothed interior surfaces. Plaster for creation of smoothed, freely-structured or levelled surfaces for interior ...
KNAUF
Maintaining the load. Inadequate protection around service penetrations can put buildings at risk of fire spread. The ROCKWOOL Firestop Compound offers a reliable solution to effectively re-instate compartmentation within fire rated ...
ROCKWOOL
M10 and CRM structural thermal insulation plaster to reinforce historic buildings and to improve the thermal comfort at the same time. Composed by natural raw materials, such as cork, natural hydraulic lime NHL 5, clay, ...
DIASEN
... breathable plaster: it avoids mould and condensation, improving the indoor air quality - It ensures a very good thermal insulation - Extremely quick application system (it can be spray-applied by plastering machines) - ...
DIASEN
Thermal spray cork-based plaster for inside and outside, suitable for thermal insulation and dehumidification. Composed by natural raw materials, the product is suitable for historic refurbishment and green building. Cork-based ...
DIASEN
Intosil is an anti-mould acrylic-siloxane plaster coating for exteriors, medium (0,5-1,0 mm) and fine (0,3-0,7 mm) grain, made of styrene-acrylic copolymers in water dispersion, siloxane resins and modifiers, selected ...
NEPTUNUS CONSOLIDANTE is a product with a base of polysiloxanes dispersed in a solvent suitable for impregnating and strengthening absorbent mineral surfaces within the field of NEPTUNUS systems. NEPTUNUS CONSOLIDANTE features a high ...
Colorificio San Marco S.p.A.
... -algae textured wall coating for external thermal insulation composite systems SERIES 469 MARCOTHERM COMPACT is a trowel effect plastic wall coating creating a levelling finish on the ...
Colorificio San Marco S.p.A.
MARCOTHERM-SYL INTONACHINO is an outdoor wall coating, with an acrylic-siloxanic binder base, highly water repellent with a plaster compact finish effect. Creates a rough layer of considerable thickness, resistant to ...
Colorificio San Marco S.p.A.
ROEFIX
ROEFIX
ROEFIX
Acrylic coating for walls with thermal insulation Use RTA 549 is mainly used as a special protective and decorative coating on exterior walls with external thermal insulation ...
Fassa Bortolo
... swings between inside and outside, allowing also a certain saving of energy. These microspheres of glass give the product insulating and sound proofing properties. It can be applied on every kind of wall and in strong ...
OIKOS colore e materia per l'architettura
... or old and well-adhered to surface Light plasters and thermo-insulating plasters, as well as absorbent and non-absorbent Surfaces with synthetic finishes or plastic paint Exterior insulation systems, ...
... mineral based plaster (groups PII and P III as per DIN 18550-1). Also suitable as finish on matt emulsion- or silicate-based coatings. Note: Not for use on surfaces containing efflorescence, on plastics and wood or on ...
Caparol
CURAL® is a waterproofing coating composed of elastomeric bitumen, aluminium pigments, fibres, mineral fillers and volatile solvents. CURAL® is used as a bituminous covering to replace older waterproofing coats, particularly ...
Ready to use, superlight thermally-insulating base screed Selected water binder prebatched for 110 Kg/m³ - perfectly spherical virgin expanded polystyrene beads with high thermal insulation power (2 ...
Edilteco
... classification A2-S1. MATERIAL All spraying machines for paste. COVERAGE From 6 kg to 8 kg /m². COVERING All types of paints and coatings Application All holes should be filled before application. Elastic cotton ...
INTERIOR DECORATIVE COATING The ideal solution for rustic wall and ceiling decoration: KEDOLIS DECOR conceals substrate defects and decorates in one operation. TECHNICAL DEFINITION Filling and decorative coating ...
... cracks. When insulating general building applications, ROCKWOOL stone wool slabs provide the best thermal, acoustic and fire protection in any given application. The Ablative Coating is used in conjunction ...
Finishes for Senergy wall systems and for other cementitious wall surfaces This is a 100% acrylic polymer finish with advanced technology to improve long-term performance and dirt pick-up resistance.
BASF USA
... reinforced dowelling system for the renovation or damaged render or external wall insulation systems. 1. Substrate Damaged render system or external wall insulation system 2. Levelling Coat StoLevell ...
... graded perlite and gypsum plaster at the mill. Gypsolite provides a uniform base for the finish coat. Lightweight. Gypsolite weighs less than half as much as sanded gypsum plaster, thus reducing the dead-load on framing. High ...
Tollens
Sigma
Shives with fibers for coating Thermal insulation & acoustic insulation with hemp and lime Components Hemp aggregates. Inner part of the dry, defibered, calibrated, filtered plant. ...
TECHNICHANVRE
PC® 74 A2 is mineral coating FOAMGLAS®. PC® 74 A2 is mixed with water, in particular used as non-inflammable coating on FOAMGLAS® in fresh air ducts or on air channels, pipelines and cavity floors ...
FOAMGLAS®
... for plaster containing perlite . • - Insulating: Perlite possesses millions of tiny air particles and in turn permanent insulation cavities that reduce heat transmission losses. Perlite adds a high thermal ...
How to choose this product
Insulating plaster varies with the incorporated insulation material: lime/hemp, earth/straw, polystyrene beads, etc. Spread or blown onto a wall, it reduces thermal transfer and the structure's energy consumption. ArchiExpo offers a variety of natural plasters, including lime/hemp and lime/cork combinations and latex-based products, among others.
Applications
Insulating plaster often is used in facade remodeling projects. It reduces the thermal leakage of older brick and ashlar walls.
Technologies
Plaster thickness is a function of wall characteristics. It can be applied to the outside or inside surface, depending on wall construction and desired degree of insulation.
Advantages
- Reduces heat leakage
- Improves energy conservation
Please specify:
Help us improve:
remaining