PLASGLUE is a special adhesive, polyurethane-based, single component, moisture-curing. The bonding obtained, elastic medium, it is highly adhesive and tenacious. Unlike the others moisture-curing polyurethane adhesives, PLASGLUE is odourless and free from solvents or thinners high volatility.
Chemical composition Polyurethane prepolymer modified
• Physical aspect Red liquid light transparent
• Odour odourless, light-characteristic
• Viscosity RVT 2.000 ± 500 m. Pas
a 23°C gir.6 a 50 gir. Min.
• Open time 15-25 min. a 20°C
• Behaviour to Excellent resistance to water, heat and cold
the weather
For its properties of adhesion and toughness is suitable for bonding wood friezes and cornices, MDF, chipboard, wood pulp, polyurethane, between them and on painted surfaces. Suitable for bonding frames and plasterboard, between them or on surfaces described above. Ideally used for bonding polystyrene with sheet metal, laminates and wood surfaces to get insulating panels (covers industrial buildings ecc.).
• Check in advance that the painted parts to be bonded are free from paraffin or have been used in paints rich in paraffin or similar, which may create anti-adhesive effect to bonding. In these cases it is good to roughen the surface with light sanding.
• Do not smear excessive amounts of adhesive, especially on thin panels to avoid that there may be warping of the panel.