The integrated motorisation kit is the kit invisible from the outside that allows the movement of door panels mounted on PROTEK® pocket frames to be automated.
SET OF ELEMENTS CONTAINED IN THE KIT:
- 1 24V gearmotor with support;
- No. 1 230Vac/24Vdc transformer;
- No. 1 belt + belt puller;
- No. 1 Idler pulley;
- No. 1 Lever for blocking supports.
Technical Notes:
- Can be installed with the pocket frame already in place, it reduces the passage clearance (L) by approximately 80 mm; alternatively, a pocket frame increased by 100 mm must be provided at the design stage.
- The system is Push&Go: if the panel is moved manually, it completes the opening/closing cycle.
- The system automatically learns the opening and closing limits of the door and slows down the stroke of the panel before fully closing/opening.
- Standard equipment allows for push-button opening (either with two-position switch or sequential push-button).
- Standard equipment allows the door to close automatically after 2, 5 or 10 seconds of inactivity.
- Photocells, wall-mounted or pocket remote controls and home automation kits for smartphone opening are available.