The VBus®/LAN interface adapter is designed for the direct connection of the controller to a PC or router. It enables easy access to the controller via the local network of the owner. Thus, controller access, system parametrisation and data read-out can be effected from every workstation of the network. The VBus®/LAN interface adapter is suitable for all controllers equipped with a RESOL VBus®. A version of the RESOL ServiceCenter software is included. VBus.net access is not possible with this product. For VBus.net access, you will need a KM2 Communication module or a DL2 / DL3 Datalogger.
The network connection for your solar system
Access to the system via the complete network
Remote parametrisation of the controller via VBus®
RSC software included on CD-ROM
Power supply: mains adapter input voltage: 100 ... 240 V~ (AC) (50 ... 60 Hz)
adapter input voltage: 12 V (DC)
Data interface: VBus® for the connection to the controller, LAN connection RJ45 with 2 status LEDs
Housing: plastic
Ingress protection: IP 20 / IEC 60529
Dimensions: 95 x 70 x 25 mm
Target group
These instructions are exclusively addressed to authorised
skilled personnel.
Only qualified electricians should carry out electrical
works.
Initial installation must be effected by the system owner or
qualified personnel named by the system owner.
Instructions
Attention must be paid to the valid local standards, regulations and directives!
Information about the product
Proper usage
The RESOL VBus® / LAN interface adapter may only be
used for connecting an electronic controller for solar thermal systems to a computer network or PC via the RESOL
VBus® in compliance with the technical data specified in