Concrete primer BETON CONTACT

acrylicfor indoor use

Gross concrète surface primer BETON CONTACT is an acrylic émulsion based primer developed to increase the adhesion of gypsum plaster on exposed concrète and ceilings. SCOPE OF APPLICATION BETON CONTACT is used to increase the adherence of gypsum plaster and similar lime-gypsum mortars on exposed concrete. FEATURES - Adheres very well to the surface. - Penetrates exposed concrete very well to provide a good ground for other application materials, - As it is water-based, it is harmless to human health and environment. SURFACE PREPARATION Clean all dirt, oil, blistered paint and dust off the application surface; level the surface defects, if any. APPLICATON INSTRUCTIONS Prior to application dilute BETON CONTACT with 40-45% water, mix well. - Then apply the product with roller, - Start plaster or gypsum application 24 hours after applying BETON CONTACT. - The environment of application must be kept between +5°C to +35°C within 24 hours during and after the application. DRYING TIME Allow 5-6 hours for touch dry and 24 hours for complete dry at 23oC environment conditions. THEORETICAL CONSUMPTION Depending on surface smoothness, porosity and application methods, for a single coat application; - 1 lt covers 5,5– 11,0 m² of surface, - 1 kg covers 3,0– 6,5 m2 of surface, - The paint consumption for 1 m2 area is 90 -180 ml and 150- 330 gr.