Coating flooring PAVIWATER® ESD A+B

epoxyindoorindustrial

Solvent-free two-component epoxy primer. Suitable for areas with the presence of devices sensitive to electrostatic charges (ref. ANSI/ESD STM 97.1 /97.2 and IEC 61340-5-1). Suitable for floors with Atex class II environments and antistatic floors according to EN1504-2 class II. Description Two-component colored finish (A + B) based on epoxy and amine resins in water dispersion, with a high content of solids. Innovative raw materials based on carbon nanotubes give the coating an electrical conductivity that complies with the main standards of the ESD industry. The resistivity value is homogeneous and constant over the entire surface and allows to disperse the charges on the surface and to discharge them transversely on the underlying layer. Excellent wear resistance.Easy cleanability and sanitization of the surface. Use Colored conductive painting of floors inside buildings. Painting to renew the color of old resin floors. Paint for wall plinths. Suitable for Atex environments, Class II. Suitable for electronics companies and wherever devices sensitive to electrostatic charges are manufactured or assembled (ref. ANSI/ESD STM 97.1 / 97.2 and IEC 61340-4-1). Support The substrate must have a minimum compressive strength of 25 N/mm2 and a tensile strength of 1,5 N/mm2. Preparation of the support Concrete bases must be solid, dry (seasoned if newly built), leveled, absorbent, not polluted by oils, detergents, disarming, powders or other substances. Check for rising damp. Evaluate the most convenient type of mechanical preparation (abrasiving or sanding). Holes and slight anomalies can be repaired in advance with PAVIRAPID or SIVITCOL.