Epoxy flooring CONDUPLAST® A+B

indooroutdoorindustrial

Static-dissipative epoxy self-levelling. Suitable for areas with the presence of devices sensitive to electrostatic charges (ref. ANSI/ESD STM 97.1 /97.2 and IEC 61340-5-1). Suitable for floors with Atex class II environments and antistatic floors according to EN1504-2 class II. Description Two-component product based on epoxy resins in combination with cycloaliphatic amine hardeners and carbon fibers, for the realization of self-leveling coatings and shaving.The mechanical resistance values are increased thanks to the Carbon Fibers contained in the formulation.Colors can be made on request.The abundance and length of the fibers provide guarantees of conductive continuity of the applied layer even in the presence of irregularities of the substrate. Use Electronic companies and wherever devices sensitive to electrostatic charges are manufactured or assembled (ref. ANSI/ESD STM 97.1 / 97.2 and IEC 61340-4-1).Floor coverings subject to the transit of wire-guided trolleys.Atex environments, Class II.Operating theatres and wherever the accumulation of electrostatic charges must be limited. Support The substrate must have a minimum compressive strength of 25 N/mm2 and a tensile strength of 1,5 N/mm2. Preparation of the support Evaluate the most convenient type of mechanical preparation (sanding, shot peening or milling) and then apply SUPERCONDUPLAST. Any holes or anomalies can be leveled by preparing a mortar with CONDUPLAST e QUARTZ mixed in weight ratio 1 to 4.Tiled floors should be sanded or shot blasted to a completely opaque surface, then apply one or more shots of SUPERCONDUPLAST.