Waterproof primer S-9000

for cementepoxylatex

S-9000 is an easy to apply liquid membrane that can be used for crack isolation and/or waterproofing. S-9000 meets or exceeds the requirements of ANSI A118.10 and 118.12 for load bearing, bonded, waterproof membranes for thin-set ceramic tile and dimensional stone installations. S-9000 can be used vertically, horizontally, interior or exterior. S-9000 consists of a liquid polymer binder and a fiber mesh reinforcing fabric. It is easy to apply with a trowel, paint roller or brush. After proper installation and curing, ceramic tile can be installed over S-9000 with a Summitville latex modified mortar or epoxy mortar. S-9000, when properly applied and cured only increases the thickness of the floor installation approximately 20 mils or twenty thousandths of an inch. S-9000 is rated for Extra Heavy Traffic per ASTM C627/TCNA(Tile Council of North America). S-9000 is formulated with a special color indicator which lets the installer know when the system is cured and ready to re-coat or apply tile. In the liquid stage, S-9000 is light pink. S-9000 is orange/red in the cured state. S-9000 will bond to concrete, plywood, CBU, gypsum board, clean tile and stone surfaces. S-9000 contains no organic solvents or harsh fumes, is safe and non-flammable.