Heat-recovery ventilation unit UNI MAX

decentralizedresidentialfor home

Decentralized unit for the small offices, facilities, classrooms and living spaces. Air flow: up to 160 m³/h. Efficient decentralized ventilation unit for small offices or conference rooms. Visible ceiling suspended installation. A version with electrical preheater is available for cold climate. Clean air due to the use of an ePM1 70% / F7 filter for supply air filtration. Possibility to connect fresh air inlet and exhaust air ducts at top or back side of the unit. Low noise operation from 16 dB(A) at 3m. High level of comfort due to builtin bypass and air dampers. The casing is made of galvanized sheet metal with white painted decorative cover. The contemporary design of the Uni Max unit will seamlessly blend into any interior. The unit is heat- and sound-insulated with a 20 mm layer of foam. The service panel is easy to open for filter maintenance. The unit is equipped with two Ø125 mm spigots for fresh air intake and stale air exhaust. The position of the spigots can be changed from horizontal to vertical. The Uni Max E S21 units are equipped with an electrical preheater to prevent heat exchanger freezing in the cold climate. The Uni Max units are equipped with a bypass for summer cooling by the cool air from outside. The Uni Max unit is equipped with two automatic air dampers, which close automatically when the unit is off to prevent drafts. The Uni Max unit is equipped with a plate counter-flow polystyrene heat exchanger for heat recovery. The unit condensate is collected and drained to the drain pan under the heat exchanger. The Uni Max E unit is equipped with an enthalpy plate counter-flow heat exchanger for energy (heat and humidity) recovery.