Wire mesh garden gate 358

Zaun’s range of 358 pedestrian gates is designed to allow the safe passage of people easily and simply through the fence line. Each gate can be manufactured with various 358 mesh infills to match the fence line, including HiSec 358, HiSec Profile, HiSec DualSkin & HiSec Plus. Mesh panels are clad to the attack side of a steel 50mm x 50mm SHS frame. All pedestrian gates are supplied as standard at 1.2m wide although other widths and double leaf options are also available upon request. All gates above 1.8m in height are supplied three safety points, either supplied with three hinges and/or supplied with gate arrestor cables. This means that if any of the hinge points fail, then the gate will not fail and cause harm to pedestrians and property. The gate is designed to in a way to prevent the leaf from being lifted away from the gate post, making it difficult to vandalise or damage. At Zaun, we believe that if a gate is big enough to present a real risk of crushing, then the failure of one component should not allow it to fall. Pedestrian swing gates are manufactured to comply with BS 1722 Part 14: 2017 and supplied with a slide latch locking mechanism, but may also be designed with closers or your choice of lock, from a euro cylinder lock to electronic locks. Pedestrian swing gates may also be manufactured to suit automation. Each gate can also be supplied with a range of topping options to provide additional security. Zaun can also provide an additional mesh over the panel to encase the gate within the fence line.