Reinforced concrete piles

... multiple of the pile bearing capacity (i.e. the bearing capacity increased with a chosen safety coefficient). 5. The steel elements are filled up with concrete. 6. The pile is placed ...

The "Pressurized Concrete Screw Lambda" or PCS Lambda (λ) screw pile is a screw pile with a large stem implying a partial displacement of soil during the screwing-in sequence and limited ...

... Pouring of concrete through the hollow stem of the auger as auger and casing are simultaneously withdrawn and formation of the pile shaft. 5. Placement of the reinforcement cage in the freshly concreted ...

Soil freezing or soil solidification is a temporary reinforcement of water-containing soil by means of ice walls. The concept is to convert pore water into frozen water (ice). The frozen pore water acts as a bonding agent, fusing together ...

... obtained. 3. Cement grout is injected at the base of the pile and moves up along the casing tubes: injection outside and inside the pile. 4. The completed TEP pile. Fields of application • ...

... contrast to concrete piles). This is beneficial, as the design and construction phases of projects are increasingly being carried out simultaneously. Vibro piles can absorb greater compression ...

TreviI piles belong to the category of cast in-situ driven piles, in a previously driven pipe form, driven without extracting the soil. Their special feature is their expanded concrete ...

... impact driving and by the static load it has to support. Pile joints can be used with both precast and pre-stressed concrete piles, to join two or more short piles to ...