- Building & Construction >
- Insulation and sealing >
- Synthetic insulation
Synthetic insulation
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Thermal resistance: 0.02, 0.05 m²K/W
Thickness: 2, 4 mm
MAPESONIC CR is the Mapei solution for acoustic living comfort: reduces discomfort due to impact and footstep noise (heels, moving chairs and furniture around, impact noise from falling objects, etc.). MAPESONIC CR is a rubber and ...
Length: 2,500 mm
Width: 1,250, 1,320 mm
Thickness: 500 mm
... Basotect® is not only the ideal solution for acoustic insulation. With its very good thermal insulation properties and easy processing, Basotect® also impresses with respect to thermal insulation ...
BASF Energy efficiency
Thermal conductivity: 0.033, 0.036 W/(m.K)
Length: 2 m - 30 m
Width: 1 m
THE FLEXIBLE & SUSTAINABLE INSULATION SYSTEM FOR ENERGY EFFICIENCY & CONDENSATION CONTROL. TRUSTED FOR OVER 40 YEARS Special Features - Built in water vapour barrier reduces risk of corrosion under insulation ...
Armacell
Length: 1,000 mm
Thickness: 90 mm
... state cavity barrier for rainscreen systems. An advanced intumescent strip fixed to high density non-combustible ROCKWOOL insulation, SP Firestop OSCB is designed to form an open-state cavity barrier within a rainscreen ...
ROCKWOOL
Thermal resistance: 0.5, 0.2 m²K/W
Length: 1,200 mm
Width: 200 mm
... concealed wall cavities, having been tested and assessed for up to 60 minutes’ integrity and insulation, exceeding the minimum requirements. These cavity wall insulation products have been created ...
ROCKWOOL
Thermal conductivity: 0.021 W/(m.K)
Thermal resistance: 4.25, 5.45, 6.65 m²K/W
Length: 1,190 mm
Thermaclass Cavity Wall 21 is an easy to install, polyisocyanurate (PIR) insulation board for full fill cavity wall applications, with excellent thermal performance (0.021 W/m.K). Featuring a low emissivity foil facing, ...
Width: 100 cm
... walls and floorings Isolmass is the alternative sound insulation solution. Trocellen developed Isolmass in order to satisfy those customers who prefer not using lead with their sound insulation solutions. Isolmass ...
Trocellen Italia
... our houses and generally in our lives. Trocellen keeps developing foam solutions to provide the best thermal and acoustic insulation to increase your comfort. The product Flexible, open cell polyester-based polyurethane ...
Trocellen Italia
Your benefits • Made of long lasting closed cell polyethylene insulation foam. • Constant insulation value for at least 23 years, probably longer.* • Clean, non toxic, mould and bacteria resistant, ...
Trocellen Italia
Thermal conductivity: 0.036 W/(m.K)
Thermal resistance: 0.3, 0.51, 1.37 m²K/W
Length: 2,500 mm
... rooms where there is a permanently raised level of humidity For walls, ceilings and floors Vapour barrier and thermal insulation Vapour barrier (sanded epoxy-resin vapour barrier) - 1,5 mm Diffusion equivalent ...
wedi GmbH
... Special ashlar mat wit SBR rubber and polyurethane foam used in the high-performance floating screed systems for acoustic insulation from impact noises. Provided with waterproofing strip on the upper side.
EDILTECO Group
Thermal conductivity: 0.066 W/(m.K)
Closed-cells virgin beads of expanded polystyrene, specific for dry blowing into cavity walls and surronding voids Closed-cells virgin beads of expanded polystyrene, specific for dry blowing into cavity walls and surronding voids, ...
EDILTECO Group
Thickness: 10 mm - 60 mm
Prefinished thermal insulating Aerogel board Ecap® Nano is a pre-finished thermal insulation panel for thermal insulation on walls (external and/or internal) and ceiling. ...
EDILTECO Group
Thermal conductivity: 0.035 W/(m.K)
Thickness: 40 mm
Soundproofing panel, waterproof and incombustible, suitable for the realization of stratified walls, made of a double layer of 20 mm thick rock wool and density 100 kg/m3 with an interposed element in the sound-resistant polyolefin polymers ...
eterno ivica
Thermal conductivity: 0.035 W/(m.K)
Thickness: 30, 40, 50 mm
... hazardous substances. The sound-absorbing panels, placed as cavity panels of dry systems, are essential to achieving the sound insulation of walls, false walls and false ceilings. ECOFIBRA, dust-free, odorless, consists ...
eterno ivica
Thickness: 6 mm
Vibration-damping elastomer in non-porous styrene rubber (SBR), black in color, to be inserted at the foot of the non-load-bearing walls, having a thickness of 6 mm. The imprint with grooves in rows on one side allows a support of 40% ...
eterno ivica
Thermal conductivity: 0.035 W/(m.K)
Thickness: 4 mm - 80 mm
... special coating, they are ready to be tiled, rendered or plastered. Their excellent thermal insulation properties make them ideal for use as effective thermal insulation. The construction boards are perfectly ...
Jackon Insulation
Thermal conductivity: 0.035 W/(m.K)
Thickness: 4 mm - 80 mm
... special coating, they are ready to be tiled, rendered or plastered. Their excellent thermal insulation properties make them ideal for use as effective thermal insulation. The construction boards are perfectly ...
Jackon Insulation
Thermal conductivity: 0.035 W/(m.K)
Thickness: 20 mm
... 300 x 300 mm and 200 x 400 mm Can be cut to any length Special U-shape formats available on request Excellent thermal insulation properties with λD = 0.035 W/(m·K) High compressive strength > 200 kPa For rooms subject ...
Jackon Insulation
Length: 225 cm
Width: 122 cm
Thickness: 12.7 mm
... laminated on both sides to a mineral coated fiberglass facer. The ISOGARD HD cover board spreads the load and protects the insulation boards underneath. It combines impact resistance and ease of installation in a single ...
... edges, rebated or male-female interlock, density 300 to 700 kPa High comfort levels with Tegotherm XPS The thermal insulation of buildings using the high performance Tegotherm XPS boards results in high comfort ...
Thermal conductivity: 0.037 W/(m.K)
Thickness: 10 mm
Impact noise insulation cloth Use Soundproofing floors against impact noise in compliance with Italian PM Decree of 05/12/97, by creating a floating floor subsequently applied with coverings such as ceramic, wood, ...
CIRFIBER is a polyester fibre panel made from 100% new polymers processed by fibre thermo-binding.
Length: min 5000.0 mm
Width: min 1000.0 mm
Thickness: min 18.0 mm
PRESENTATION PKB2 acoustic insulation is a two-layer complex composed of a heavy mass of polymer base and a textile fiber bonded to one of the faces. APPLICATIONS Floors, walls and ceilings.
PRESENTATION Anti-vibration plates in pressed recycled rubber for the construction of floating floors. ADVANTAGES Acustilastic-N is an optimal and fast solution for laying floating floors, precise and efficient, without fear of breakage. APPLICATIONS Elastic ...
PRESENTATION Material made of EPDM synthetic rubber, flexible and heavy, which provide it with the appropriate physical characteristics for reducing surface vibrations and high acoustic insulation. ADVANTAGE It ...
Thermal conductivity: 0.035 W/(m.K)
... additionally fastened with anchors/dowels, if required. * ETICS = External Thermal Insulation Composite System Brit. term: EWI = External Wall Insulation Am. term: EIFS ...
Thickness: 5, 10 mm
Membrane DPACT is a thin-layer high effective noise insulation formed of closed cell crosslinked polyethylene, with closed pores on both sides, with improved formulation for acoustic insulation. The loss ...
Thickness: 4 cm - 12 cm
... of kg/m², reinforced in TNT polyester and slate chips’ finish The bonded panels GT 3 - GT 4 - GT 5 are suggested for insulation and as a waterproofing primer of flat and pitched roofs. Standard Dimensions: 1200 ...
Stiferite
Schlüter®-KERDI-BOARD is a multifunctional tile substrate for wall areas, which can be used for creating bonded waterproofing assemblies with tile coverings. Additionally, the product has many uses as a structural panel. It consists ...
Schluter-Systems
Gonon Isolation AG (SA)
Gonon Isolation AG (SA)
Gonon Isolation AG (SA)
Vacupor® NT is the standard design of our vacuum insulation panel. Through the use of different barrier foils, Vacupor® - NT can be adapted individually to the requirements of different applications, regarding life span, ...
Porextherm Dämmstoffe GmbH
... rated value of 0,007 W/(m*K) Vacupor® NT-B2-S is the basic version of our building authorities approved "S-type" Vacuum Insulation Panels. The German Institut for civil engineering (DIBT) granted the approval by the ...
Porextherm Dämmstoffe GmbH
Building authorities approved Vacuum Insulation Panel for the Vacuspeed® system. Further information about the Vacuspeed® system can be found under: The German Institut for civil engineering (DIBt) granted ...
Porextherm Dämmstoffe GmbH
Thermal resistance: 1 m²K/W - 3.9 m²K/W
Thickness: 3 cm - 12 cm
Placoplatre
Thermal conductivity: 0.034, 0.036, 0.029 W/(m.K)
Thermal resistance: 1.5 m²K/W - 4.15 m²K/W
Thickness: 50 mm - 120 mm
URSA France
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how ArchiExpo processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining