{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Thermal conductivity: 0.022 W/(m.K)
Budget saving multi-purpose granulated insulator. Material: granulated polyiso insulator. Thermal conductivity: k=0,022 W/m*k Water absorption: < 2% Volume: 0,15 cubic m Weight: 2,8 kg Fraction size: 5-20 mm
PROFHOLOD
Thermal conductivity: 0.022 W/(m.K)
Thickness: 50 mm
... residential building. Guarantees energy efficiency insulation for roof, floor, wall, ceiling in any type of old or new properties. Designed for easy installation. Dimensions: 600х1200х50 mm Core material: PIR ...
PROFHOLOD
Thermal conductivity: 0.022 W/(m.K)
Thickness: 50 mm
Design for areas with high risk of water leakage: for insulation of roofs, grounds, showers and bathrooms, etc Dimensions: 600х1200х50 mm Core material: PIR Premier Coating: Vinyl film Package: ...
PROFHOLOD
Thickness: 4 cm - 12 cm
... of kg/m², reinforced in TNT polyester and slate chips’ finish The bonded panels GT 3 - GT 4 - GT 5 are suggested for insulation and as a waterproofing primer of flat and pitched roofs. Standard Dimensions: 1200 ...
Stiferite
Thermal conductivity: 0.022 W/(m.K)
Thermal resistance: 1.35 m²K/W - 9.05 m²K/W
Thickness: 30 mm - 200 mm
IKO enertherm ALU is a 100 % CFC, HCFC or HFC-free insulation board with a rigid polyisocyanurate foam core, clad on both sides with a multi-layer gastight aluminium complex. This ...
IKO
Thickness: 1, 0.75, 0.63, 0.5 in
Dow's TUFF-R™ product line features a high-performance polyisocyanurate foam core with reflective foil facers on both sides (one side reinforced). Uses: Interior wall behind 1/2" gypsum board or equivalent ...
Dow
Thermal conductivity: 0.024, 0.025, 0.026 W/(m.K)
Thermal resistance: 0.96 m²K/W - 6.65 m²K/W
Thickness: 25 mm - 160 mm
CARLISLE® Thermal Insulation-T is a high performance tissue faced insulation board that has been specifically designed for use with award-winning RESITRIX® and HERTALAN® waterproofing membranes, in both ...
CARLISLE Construction Materials GmbH
... seamless insulation ... for PUR(E) energy saving Insulating core made of PUR/PIR rigid foam Consistently high insulation values (TCL 023) ...
Thermal conductivity: 0.028, 0.025 W/(m.K)
Thermal resistance: 1.05 m²K/W - 6.4 m²K/W
Thickness: 30 mm - 160 mm
POLIISO® SB is a yellow thermal insulation panel made of rigid, closed-cell PIR foam, expanded between two supports: the top one is made of bituminized glass fiber and ...
Ediltec
Thickness: 25.4 mm - 101.6 mm
Firestone ISO 95+ GL consists of a closed-cell Polyisocyanurate foam core laminated on both sides to a black glass reinforced mat facer of approx. 150 g/m². Firestone foam technology ...
Firestone Building Products
KEMPERTHERM® is a CFC- and HCFC-free, rigid PIR insulation board used as part of the Stratex warm roof system with a dense, closed cell structure that gives excellent compressive strength and low thermal ...
KEMPER SYSTEM
AISLADECK is a rigid thermal insulation board for roofs, formulated with polyisocyanurate (P.I.R.) through a foaming process. Type VV is covered on both sides with glass veil, Type BV ...
TEXSA
Insulation made from PIR-foam, available in a broad variety for above rafter insulation on the roof and and floor insulation.
... combining a geocomposite sealing and drainage of underground walls SOMDRAIN T5 thermal insulation AFITEXINOV ISOL RT5. This insulation is a polyisocyanurate (polyurethane family). It ...
Thermal conductivity: 0.028 W/(m.K)
Thermal resistance: 0.71 W/(m.K) - 5 W/(m.K)
Thickness: 20 mm - 140 mm
... Thermal insulation of civil and industrial roofs below bituminous waterproofing layers. Thermal insulation of pitched roofs under tiles and slates or of terraces below paver tiles. Lined: Thermal ...
Isolparma
... ozone depletion potential (ODP) Manufactured in accordance with BS/IS EN 13165:2008 Thermal insulation products for buildings. Factory made Rigid Polyurethane Foam (PUR) products. Specification. BS ...
Xtratherm
Gonon Isolation AG (SA)
Thermal conductivity: min 0.0 W/(m.K)
λD = 0.023 W/m.K. For extreme insulation values, coated on both sides with an aluminium multi-layer complex. IKO Enertherm ALU is a 100 % CFC-free insulation board with a core of hard polyisocyanurate ...
ATAB
Thermal conductivity: 0.027, 0.026 W/(m.K)
Thermal resistance: 1.1 m²K/W - 3.85 m²K/W
Thickness: 30 mm - 100 mm
A polyisocyanurate (PIR) isolation plate covered on both sides with a glass veil for application as a support to the weatherproofing on deck metal roofing, both new and for rehabilitation. CE marking ...
EUROPERFIL, SA
Thermal conductivity: 0.027, 0.026 W/(m.K)
Thermal resistance: 1.1 m²K/W - 3.85 m²K/W
Thickness: 30 mm - 100 mm
A polyisocyanurate (PIR) isolation plate with its topside covered with a complex of oxyasphalt and its bottom side with glass veil, for application as a support to the weatherproofing on deck metal roofing, ...
EUROPERFIL, SA
Thermal conductivity: 0.027, 0.026 W/(m.K)
Thermal resistance: 1.45 m²K/W - 3.05 m²K/W
Thickness: 40 µm - 80 µm
A polyisocyanurate (PIR) isolation plate covered with 12 micron aluminium foil plus a natural kraft lining adhered to both sides for application as a support to the weatherproofing on deck metal roofing, ...
EUROPERFIL, SA
Please specify:
Help us improve:
remaining