|
|
|
Direct and in direct light suspension for 2x54W linear fluorescent T16 lamps. Iron body. High efficiency anodized aluminium anti-glare louver (CIBSE LG3 Cat.2). Electronic ballast installed in the housing of the luminaire. Complete with suspension kit, power cable and end caps; however it cannot be mounted in configurations.
|
|
|
hanging light fixture for interiors IP20. 2400mm long and 180mm high, made of anthracite varnished metal with optics in gold oxidized aluminium with natural brass louvres. it is cabled for G59 4x54W fluorescent lamps and for 240V power supply. it is possible to use either the fully-integrated rosette, or the one to be fitted to the ceiling. in the latch version it is possible to adjust the distance from the work surface with a 500mm travel range, by means of a system without sight mechanism, specially designed by Viabizzuno, duly patented and registered, that permits to raise and lower it very easily. 1-10V dimmer included.
|
|
LIGHT FIELDS - modular micro-prism lighting system
Designed by Sottsass Associati, the LIGHT FIELDS lighting system is unique in several respects. Available with direct light distribution as a surface-mounted or recessed luminaire, with direct-indirect lighting as a pendant or free-standing luminaire or as a cluster-like light field resembling the qualities of a skylight, Light Fields represents a hitherto unknown complete range of innovative office lighting.
With its brilliant, glare-free light, the innovative micro-prism optic not only provides optimal conditions at DSE workstation. It also makes it possible to arrange workstations freely within a space, thereby giving office organisation all the freedom it desires. Thanks to its minimalist, elegantly restrained lines, LIGHT FIELDS blends inconspicuously but effectively into the architecture of the space.
|
|
|
The smart use and intelligent utilisation of lighting makes the lighting solution strike a balance between human aspects and energy efficiency.
|
|
design J.M. Duthilleul
A polycarbonate exterior and an original and technological design makes these fluorescent T16 fittings stand out.
IP 66 and IK 10 certify the resistance to dust and water penetration as well as protection against impact, making the fittings ideal instruments for work spaces, industrial areas, stations and undergrounds, pedestrian areas, wellness and relaxation areas, parking areas or other spaces that have both interior as well as exterior components. Lighting is homogeneous and direct glare is reduced thanks to the stripes on the entire body of the fitting. Available in two diameters, 80 and 110 mm, in two lengths. There is a single lamp or a two-lamp version as well as an RGB version with DALI control gear.
|
|
The 6" Diameter Tube is ideal for ambient, task or accent lighting for commercial, supermarket, and retail applications. With its extruded aluminum construction and die cast connectors the product can be configured in straight runs or in geometric patterns. Designed to accommodate T5, T5 HO, or T8 fluorescent lamps to provide direct, indirect, direct/indirect, indirect/track accent lighting options, the 6" Tube achieves excellent lighting performance and an elegant look in any space.
Extruded aluminum housing and die cast connectors provide structural durability in straight runs or patterns-available in over 200 standard colors.
Direct, Indirect, Direct/Indirect, Indirect/Track Lighting Options
T5, T5HO, T8 lamping options (consult spec sheet).
Available optional radial blade louver or acrylic lens provide glare control and design aesthetics.
Aircraft cable suspension or wall-mount options
|
|
The Al%u016Bm Technical Collection is Prescolite's family of circular T5 platforms, architectural pendants, and multi-lamp accent modules. Al%u016Bm integrates excellent mechanical and optical designs with contemporary form.
Discover the intrinsic value of the Al%u016Bm Technical Collection and Prescolite%u2019s commitment to redefining the concept of "mechanical art".
|
|
SNAP
Applications: Retail, healthcare, schools, corridors, stairways,
bathrooms, parking structures.
Features: Low-profile strip light with white extruded acrylic lens that
holds securely with no hardware or fasteners. Lens terminates at a flat
endplate for a clean architectural look.
Construction: Housing construction is die-formed 20-gauge steel with
spring-fastened aluminum endplates. Standard individual lengths are
2-, 3-, 4-, 6- or 8 feet, or available in row mount runs. Six and eight foot
fixtures have two diffusers with an intermediate plate at the midpoint of
the housing. White extruded acrylic diffuser is impact resistant.
Finish: The standard exterior body color is polyester powder paint in
gloss white (YGW). Refer to ordering matrix for optional metal finishes
or to the Defining Section for optional paint colors. End plates are
painted black (YBB) when galvanized (GLV) finish specified, unless
otherwise specified.
|
|
|
A traditional stack light fixture designed with a clean, round blade louver. The fixture provides high angles of light perpendicular to the luminaire while shielding occupants’ view of the lamp in the along direction. The P-54 is available in a one-lamp T8 cross-section. The luminaire is fabricated from die-formed steel or galvanized steel. Standard lengths are four and eight feet.
|
|
APARIA
Creative vision demands design elements that easily adapt- like those used in the pendant-mounted Aparia. The foundation of the fixture is an aluminum extrusion, beautifully shaped and meticulously manufactured. Its compact, elegant body comes in a variety of styles and finishes. The aluminum extrusion’s adaptability allows for easy
integration of a wide variety of materials, including frosted white or translucent blue acrylic, and slotted or perforated steel. A slot in the extrusion allows for mounting points anywhere along the axis. Aparia’s endplates, cast plates and mounting brackets add even more aesthetic choice. Finish materials include galvanized steel, stainless steel, brushed
aluminum, copper, textured matte white, pewter and multiple paint colors.
|
|
|
|
|
|
The intelligent choice for balanced office lighting
The balance between uplighting and downlighting (indirect/direct) ensures good illumination of task and people, enhancing face-to-face communication and even video conferencing
Sienna leverages the benefits of T16 lamps with two custom miniaturised optics which are key to its efficient light distribution
Optics, manufactured in Miro high purity aluminium, are available in either Satinbrite or Mirrorbrite finish, to complement office decor
Miro high purity aluminium material, together with high LOR, maximises system efficiency and minimises energy consumption
T16 lamps combine low lumen depreciation with high frequency control gear to give good light quality and faithful colour reproduction for the most stringent tasks
Dedicated louvres enable Sienna luminaires to be made as small as possible, limiting intrusion into the office while creating a comfortable environment
Infra red hand held controllers, or automatic presence detection via Sensa systems, enable users to control their lighting. Lighting can also be preset centrally in Sienna versions with digital ballasts, depending on the configuration required
Intelligent Sensa versions are available with an integral detector which responds to presence and daylight changes by dimming the light up and down
|
|
Tycoon
Family of direct / indirect luminaires utilizing the latest T5 fluorescent lamp technology. Can be used in conjunction with standard electronic ballasts, electronic dimming ballasts or provide precise digital dimming and occupancy sensing using DALI ballast and sensor technology. With an optional integrated DALI control sensor for daylight harvesting and occupancy sensing (PULSE HFMD), Tycoon can yield up to 80% energy savings compared to standard lighting equipment. Basic unit comes with two light levels for more control of the indoor environment without controls.
|
|
|
|
|
|
Suspended lamp with thin profile.
The possibility of direct/indirect emission makes it right to illuminate modern multifunctional places. A down light source, normally used in the workplace, makes a big difference of luminances between the ceiling background and the light source, causing the glare. WELL-BE makes an high visual comfort and guarantees vertically and horizontally an high level of light and good light over the walls, cancelling any shadow. White perforated metal wing shaped reflectors, located on the lamp, allow the flux recovery and the right quantity of the indirect emission. Comfort light in workplaces: WELL-BE distributes the radiated light, making visual perception easier when looking at a screen, with low reflection and best contrasts. They protect the eyes, increasing the comfort and the job motivation. Possibility to linear mounting. IP 20. Class I insulation. Voltage 230/240V. 50/60 Hz. Bulbs 6 x 54W T5. Suspension by stainless steel wire diam.1, 5 mm. Extruded and white anodised aluminium body with microbored screens. The screens allow high reflection levels and homogeneous light emission, fully glare free. Post-anodized aluminium %u201Cmil-finish optics%u201D, in accordance to DIN 5035 and UNI 10380. WELL-BE is a specialized lamp used for dental workstation. Black version on request.
|
|
|
|
|
|
Imagine the ability to capture a wonderful bright summer sky or the vivid colours of a rainbow indoors.
The LightPods are designed to be installed as a stand-alone dimmable luminaire or grouped together as modular fittings. This provides dynamic mood feature lighting or variations of white effects with the additional option of including the new well-being lamps.
Manufactured from lightweight aluminium, the unique design allows the bespoke LightPod to provide uniform DAYLIGHT, RGB, or RGBY digital light effects within the same housing. The Lightpod control is via a dimmable system operated via handheld infrared remote control.
LightPods can be supplied in a range of sizes and can be custom made to your bespoke requirements.
LightPods can also be customised to any shape you require, from square to circular LightPods.
Due to the LightPod%u2019s robust, light weight construction and plug and play technology, the luminaire is easily relocated and therefore ideal for temporary exhibitions, multi-function rooms, offices, retail and also vertical applications.
Lightpods can be supplied in a range of sizes from a 595mm sq TilePod to a 2200mm sq LightPod and can also be customised to an individual powder coat finish.
The TilePod is the smallest LightPod available and will fit into most ceiling gridwork.
|
|
|
|
|
|
Light made orientable
Thanks to a gyroscopic principle, Diapason can be easily positioned in any direction in order to highlight architectural details. A revolving stop locks the fitting in any position. Different reflectors are available depending on the light source. These reflectors are easily installed by being clipped into the housing after the luminaire installation and connection. A wide range of light sculpting accessories is available such as dichroic filters, lenses and louvres. The fixture can be directly mounted with a round or square base, in track systems or even with a M10 nipple for special applications. It is delivered in silvergrey, black or white wet paint.
Totem groups different Diapasons and can be equipped with additional T16 backlights. Using this combination, one single Totem can merge two illumination types: direct lighting for accent lighting and indirect lighting for general lighting. Due to a double circuit T16 system, general lighting can furthermore offer variations of white light.
|
|
Light made orientable
Thanks to a gyroscopic principle, Diapason can be easily positioned in any direction in order to highlight architectural details. A revolving stop locks the fitting in any position. Different reflectors are available depending on the light source. These reflectors are easily installed by being clipped into the housing after the luminaire installation and connection. A wide range of light sculpting accessories is available such as dichroic filters, lenses and louvres. The fixture can be directly mounted with a round or square base, in track systems or even with a M10 nipple for special applications. It is delivered in silvergrey, black or white wet paint.
Four different light sources can be independently positioned. In addition, depending on lamp types, a wide range of reflectors and optional accessories is available. Kwadro is suspended by steel cables. The special construction of the mounting box ensures simple installation and tool-free adjustment.
|
|
|
Individual or double module fitted with reflector lamps QR-111 or CDM-R111, which are mounted on the sides of the luminaires. Ideal for projects that need accent light. Manufactured in die cast aluminium and lacquered in textured matt white
|
|
|
Single pendant with direct lighting, using metal-halide or 230V halogen lamps. Die-cast aluminium body with grey paint finish. 2 versions: the 315mm version integrates the optical unit and the power supply unit, whilst the 180mm version comprises only the optical unit. Ferromagnetic control gear. Protective glass. Optional louvre grid. Complies with standard EN60598-1 and other specific standards.
|
|
|
A range of suspended lights using 12V halogen and metal halide lamps. Aluminium body with a white paint finish. Super pure aluminium optics and protection glass for HIT version. Electronic control gear. Quick adjustment steel suspension cables.
|
|
|
Height-adjustable spotlights for suspension in die-cast aluminium, painted in metal grey. Sources: 12V dichroic halogen lamps. Emissions: Spot. Suspension for halogen dichroic lamp, with adjustable rod from 600 to 900 mm and from 1030 to 1790 mm, with transformer
|
|
|
Suspension luminaires using 12V halogen and metal-halide lamps. Injection moulded aluminium body with a white paint finish. Die cast aluminium body. Rotation up to 355°. Lamps can be maintained without the need for tools by a simple quarter turn rotation of the lamp-holding ring. HIT version includes protective glass. Complies with standard EN60598-1 and other specific standards.
|
|
|
The suspended ATLAS allows the light to be focused anywhere, especially in those places where direct lighting is needed. All the members of the Atlas family are very versatile which enables a combination of all the versions with excellent visual and aesthetic results.
|
|
|
The HANGAR 65 pendant industrial luminaire has a body made from die cast aluminium lacquered in industrial blue and complies with IP65 rating. With quick-connection wire clamp and eye-bolt incorporated. Control gear is incorporated for HIT, HME, HST, HIE, HSE discharge lamps of up to 250W and PL-H fluorescent lamps.
|
|
Reflectors industrialist protected IP 23 with steel body
moulded and painted with the powders of polyester, gray
RAL 7035.
Possibility of increasing the index of protector until
IP44 using kits of closing of the optical compartment and choice between glass and washbasins in
polycarbonate or out of methacrylate with high module.
To the reflectors grooved the new smooth parabola is added, in order to obtain a better luminous distribution,
out of aluminum 99,85 brillanté and oxidized anodically. Collars of reserve of the reflectors, in the event of maintenance.
Anti-blowout condenser assembled on all the versions of a power of 400 W. In addition, all
the range is equipped with a food with thermal protector, in order to improve the security and to lengthen
duration of vie.h
|
|
Reflectors tight industrialist, aluminum body
moulded under pressure, paint gray RAL 7035, with
protector with the corrosion guaranteed by a treatment
of chromation Alochrome 1200.
Tempered glass, joined out of silicone and stainless steel screws and bolts. Hearth of the adjustable lamp on 8 positions, so
to obtain an optimal light output whatever the environment and the height of installation.
All the versions are equipped with food with thermal protector, guaranteeing a security
electric maximum and a great lifespan of the product. System of behavior of the body and glass in phase
of maintenance, and, platinum of power supply removable completion.
|
|
SAPIM
IP 65 ALUMINIUM PENDANT LIGHTING FOR USE IN INDUSTRIAL AND COMMERCIAL SETTINGS.
|
|
Dimensions: - 9-1/2"D x 6-1/2"H
(specify pendant length)
Die cast aluminum shade frame, stainless steel fasteners, shades available in blue, red, green, orange or white opal, UL listed electrical components.
|
|
Dimensions:
FCP660 - 13-5/8"D x 19-7/8"H
(specify pendant length)
FCP661 - 13-5/8"D x 11-5/8"H
(specify pendant length)
Die cast aluminum shade frame, integral ballast for FCP660 is extruded aluminum, stainless steel fasteners, shade is clear reflector or framed glass, glass shades available in blue, red, green, orange or white opal, diffuser is tempered glass with etched center, UL listed electrical components.
Lamps: FCP660-661 - PL: 26-70PL HID: 39-150MH G12, 70-150MH ED17; INC: 100-250W Q T4
|
|
Dimensions:
FCP660 - 13-5/8"D x 19-7/8"H
(specify pendant length)
FCP661 - 13-5/8"D x 11-5/8"H
(specify pendant length)
Die cast aluminum shade frame, integral ballast for FCP660 is extruded aluminum, stainless steel fasteners, shade is clear reflector or framed glass, glass shades available in blue, red, green, orange or white opal, diffuser is tempered glass with etched center, UL listed electrical components.
Lamps: FCP660-661 - PL: 26-70PL HID: 39-150MH G12, 70-150MH ED17; INC: 100-250W Q T4
|
|
Dimensions:
FCP662 - 17-1/2"D x 14-7/8"H
(specify pendant length)
FCP663 - 17-1/2"D x 15"H
(specify pendant length)
Die cast aluminum shade frame, integral ballast for FCP660 is extruded aluminum, stainless steel fasteners, shade is clear reflector or framed ribbed acrylic, diffuser is tempered glass with etched perimeter, UL listed electrical components.
|
|
|
|
Architectural lighting : suspended luminaires
