|
|
High-induction nozzles
The NOZ unit heater provides for excellent air distribution by making use of adjustable nozzles. Air is discharged through the high-induction nozzles at a high speed. The discharged air stream sets the stagnant surrounding air in motion (induction), which leads to optimum mixture. The NOZ technology results in comfortable working conditions.
Various heights
The nozzles are adjustable and can thus be geared to different installation heights and situations. In high rooms the nozzles are set vertically, so that the warm air stream has an optimum downward penetration. In lower rooms the nozzles are turned to a more horizontal position, so that the air is discharged less deeply. In both situations warm air is brought from the ceiling to the floor and if necessary extra heating or ventilation is provided by the unit.
Benefits:
Excellent air distribution thanks to adjustable nozzles
The low temperature gradient makes that no auxiliary fans are needed
Relatively low investment
Deep downward penetration
Large area covered
Minimal heat loss
Suitable for various heights
Functional design
Simple and flexible installation
1 NOZ unit replaces several classical air heaters in an installatoin |
|
| The ceiling mounted ELEGANT unit heaters are especially suitable for heating and/or cooling rooms with low ceilings, such as shops, workshops, garages and supermarkets. There are 10 models with heating only and 5 models with cooling operation, each with three-speed motors, continuous speed variation upon request, numerous controls and accessories for the perfect control of the ambient temperature. |
|
Their flexibility and fast heating feature make it necessary to use the Armagnac in premises such as :
- Sales and/or storage areas
- Sports hall
- Agriculture and breeding premises
- Industrial and commercial buildings.
Over a pleasant presentation, electric aerothem Armagnac are fitted with all components and accessories allowing a quick installation, a safe and quiet operation.
- Armoured resistance
- Slow speed helicoid fan
- Power contactor
- Safety and control thermostats
- Fan timer
- On/off switch with light signal
- White RAL 9003 painted sheet steel frame, RAL 9010 lacquered deflectors protected with a removable plastic film.
Produced in 2 sizes, for power from 6 to 24 kW.
For powers from 15 kW to 24 kW only, the equipment is fitted with contactors allowing a two step operation if necessary.
|
|
There are 4 models available, to suit the needs of the application ranging from 2 - 30 kW.
- Variable room heaters, to be used transportable
and stationary.
- Air intake fan heaters.
- Ventilation air heaters for air intake, circulation
and mixed air.
- Built-in units with heaters and fan |
|
| Bi-energy reversible monosplit system for industrial or commercial buildings : Internal unit is double skin 25 mm thickness including stainless steel exchanger with gas fired burner 35 kW for heating and R410A coil working with an external unit air/air 17 kW for cooling. 2 speeds fan for direct blowing or ducted applications. The unit is supplied complete with fume kit and regulation box. (Automatic change over gas heating / electrical cooling). |
|
These equipment may be connected either with vertical or horizontal vent or through a chimney.
These aerotherms do meet the main requirements of the CE standards requirement related to gas-fired aerotherm.
|
|
- Automatic built-in LPG burner
- Electronic control box
- Electric board IP54
- Infrared flame detector
- Possibility of interface with thermostat or humidistat or timer
- Safety thermostat
- Power cord with plug
- Adjustable pressure reducer (0,5-2 bar)
- Excess flow cut off valve
- Gas pipe with connections
- Stainless steel outside body
- Automatic ignition
- Summer-winter switch for use as fan
|
|
HGU model
Heating in businesses, buildings open to the public and industrial facilities with medium ceiling heights. Allows individual control of the temperature in each room.
7 models available
Heating capacity: 15 to 105 kW
Air flow rates: 1250 to 8750 m³/h
- Galvanised steel casing with RAL 7024 or RAL 7035 finish,
- RAL 7035-coated horizontal louvres,
- Stainless steel combustion chamber,
- Stainless steel heat exchanger,
- High-performance atmospheric burner: stainless steel tube, ionisation flame control, one or two stages, On/Off or modulating control,
- Sealed forced-draught combustion circuit controlled by a differential pressure switch, fan cooling,
- Propeller fan with airfoil blades,
- Electronic control board,
- Complete range of accessories. |
|
Leader in the production of quality residential generators, Aircalo proposes 3 models from17 to 29 kW for operation with natural gas or propane.
- Languedoc 150 ME Power 17.4 kW
- Languedoc 200 ME Power 23.4 kW
- Languedoc 250 ME Power 29.0 kW
This type of equipment is fitted with integrated atmospheric burner, electronically fired, and manual reset on façade. This range originates from the analysis of the new thermal and acoustic requirements and take into account the main criteria :
- Simplicity of use and maintenance
- Money saving operation
- High efficiency up to 90 % depending upon the type of equipment
- Reduce dimensions
- Material that can be recycled up to 95 %
- Ergonomic design
- Best quality vs price ratio.
They are used particularly for the heating of small volumes such as residences, vocation centres, conference house, shops... |
|
Gas domestic hot air generator with leakproof operation and smoke outlet through an extractor.
Its operation is completely autonomous and its function is that one of heating the environment air of the premises that must be conditioned.
|
|
-Small size indirect fired heaters
-Low speed axial fan ( 900 rpm )
to reduce noise levels
-High efficiency heat exchanger with a 4 tube circuit
-Sealed combustion with automatic ignition
-Multiple torch burners in sealed section
-Fumes extraction fan allows direct evacuation to the
building facia ( concentric wall exhaust ) or connection
via a flue ( concentric roof exhaust or simple chimney )
-Power supply in 230 V single phase
-Double deflection air supply grill
-Low weight to reduce the constraints of support frames
-Automatic fan thermostat
-Overheating thermostats ( automatic + manual )
-Controlled via a pilot wire : only 1 thermostat ( optional )
is necessary to operate up to 6 heaters
-Ionisation permanent flame control
-Gas pressure supply: 20 or 25 mbar ( natural gas ) or 37 mbar ( propane gas )
Suspended warm air heaters with gas burner and axial fan |
|
For a reduction of the energy expenditure, the answer to the RT 2005
The new concept of recuperator of energy developed by France air proposes a solution optimized in comparison with the thermal regulation.
These two high-output versions, 60% with plate heat exchanger and 85% with rotary exchanger, offer a solution to measure to the various requirements of the building owners.
The range is equipped with a pointed electronic regulation. It guarantees a constant temperature of blowing until flows being able to exceed the 20.000 m3/h. the offer is declined in two energies, water hot and electric, to ensure the heating of the buildings.
Loan with employment, Power Play is delivered with its remote control to liquid crystals, which will make it possible the user to select his parameters of comfort.
Quality with return!
Of a robust design, the panels doubles skin isolated by rockwool 45mm M0, offer an excellent acoustic compromise thermo. Circular prickings provided with lip seals out of rubber come to supplement the sealing with the aeraulic network.
In its version Power Play max, a battery frozen water could be considered. Configurable in wish, you will be able to define the arrangement desired according to the constraints of installations.
The range is composed of 3 models:
- Power Play 60: Monobloc - loan with employment - recuperator with plate 60% of effectiveness
- Power Play 90: Monobloc - loan with employment - rotary recuperator very high effectiveness (85%)
- Power Pay max: entirely configurable solution - any effectiveness. |
|
- Automatic oil or LPG/natural gas burner
- Electronic flame-control
- Thermostats: FAN, LIMIT with automatic reset, LIMIT with manual reset
- Electric board
- Possibility of interface with thermostat or humidistat or timer
- Power cord
- Hanging devices fitted with suspending eyes for ceiling mounting
- Filter (oil version)
- Gas train (EN 676) (gas version): gas filter, gas governor, gas safety valve and gas working valve
- Steel frame (FARM 150 e 200)
- Double skinned body for thermo-acoustic insulation and safe low surface temperature
- Stainless steel combustion chamber with aerodynamic shape
- High temperature resistant heat exchanger
- Pre-heating of the combustion chamber
- Automatic post ventilation of unit
- Summer-winter switch for use as fan
- Silent centrifugal fan version: suggested in case of connection with long air duct as it ensures greater pressure
- On request biogas feeding
|
|
Farming hot air generator completely autonomous with heating gas oil, natural gas or liquefied petroleum gases (butane gas, propane gas) operation.
These equipments function is that one of heating the environmental air by means of the thermal energy produced by the equipment.
The produced heat is driven to the premises that must be conditioned by means of two centrifugal fans.
The combustion products are extracted through a chimney in order to ensure that the driven hot air is exempt of smokes and bad smells.
The main features are the following ones:
-Heating gas oil, natural gas or liquefied petroleum gases operation.
-Closet made with galvanised sheet, covered with polyester dust and dried in the oven at 200ºC.
-Combustion oven designed for obtaining a performance of 92%.
-Electronic control with a display of the temperature driven to the premises.
-Environmental thermostat with a five-meter hose included in the equipment.
-Double deflection air impulsion grid.
-There is the possibility of coupling a digital time-programmer in order to start the equipment up and stop it automatically according to users’ necessities.
FUEL:
Heating gas oil /natural gas /LPG
APPLICATIONS:
Small and medium industry, material warehouses, greenhouses, farms and any premises with a volume between 860m3 and 1.420m3 approximately
|
|
-Indirect fired heaters
-Double steel panels for thermo-acoustic insulation
-Stainless steel combustion chamber operating
with flame inversion system
-Highly efficient heat exchanger with inspection hatch
and stainless steel vanes
-Sealed electrical control panel with protections
-Function selector 3 positions: fan only / stop / heating + fan
-Automatic burners with high pressure fuel pump and fuel
filter with simply cleaning cartridge without replacement
-High pressure centrifugal fan installed on silent blocks
-Control fan thermostat
-Overheating thermostat
-360° pivoting air outlet with adjustable horizontal deflectors
-4 way air outlet plenum available ( optional )
-Power supply in 230 V single phase
Vertical warm air heaters with fuel burner |
|
The range of helicoid aerotherm consists in 7 different models used either in heating or cooling mode.
These equipment are intended to large volume buildings, store house, garage, workshop…
Aircalo aerotherm enables rapid heating or cooling volumes at the same time, mixing the air sufficiently to prevent its stratification (it is possible to complete this mixing by using zephir air recyclers).
Depending upon the characteristics of the building to be equipped, the Aircalo aerotherm may be hung (vertical blowing) or wall mounted (horizontal blowing).
|
|
The heaters of the IGRAF family are used for surface heating and for fluid heating.
•HEATING AND DRYING of marble slabs, of resin surfaces, of scrap iron.
•Suitable to be incorporated in all exsiccation and drying ovens for wood and other materials.
•HEATING OF FLUIDS for industrial degreasing, for food cooking. |
|
Héliotherme H 4000
Group motoventilator technology ROTOREX available in three-phase current 2 speeds and variable single-phase current 1 speed (reduction of tension).
Diffuser doubles deflection technology JET+ of series.
Batteries:
Water BP: 1,2 or 3 row (S) - Tube coppers
Water HP: 1 row (2 or 3 rows on request) - Tube steel
BP vapor or HP: 1 row - Tube cupronickel
Electric: armor-plated resistances STAINLESS inserted directly in the winged block for an optimum exchange Body galvanized steel prelacquered RAL 7035
Oil collecting tray of the condensates integrated of cooling use or reversible with bottom at a peak diamond and nautical connection.
Available in 5 sizes according to the hot or cold thermal power (from 4 to 155 kw) and the flow (of 1700 to 11000 m3/h) to provide |
|
SlimKon façade heating systems
Today architects are designing more and more buildings with glazed façades. The heat requirement in the building is relatively easy to meet but managing the cold air around the perimeter is a more difficult problem: the heat losses around the perimeter cause air movement und can lead to unpleasant cold draughts.
Conventional heating systems are expensive to install and not always desirable from an architecural point of view. The solution? The SlimKon façade heating system effectively yet unobtrusively produces a "screen" of warm air in front of the glazing.
Features
effective screening, even at mezzanine level - comfort right up to the external façade
unobtrusive - fits into the interior architecture
convection heating prevents substantial energy losses - energy-saving!
highly-efficient
simply to install and maintain; ideal for retrofits
wide range of styles and finishes to meet individual design requirements
neutral in design; dimensions to suit
|
|
| The Atlas unit heaters have a big heart: a coil that has been conceived, designed and manufactured specifically for heating industrial environments. The thickness of the pipes, steel as standard, the diameter (Ø 22 mm) and the excellent ratio between the flow-rate of air and the heat output guarantee long life and exceptional comfort. The Atlas unit heaters are made in 10 sizes, with heat outputs from 5 to 120 kW, and are available with 1 row coils for steam or high-temperature water systems, 2 row coils for hot water systems and 3 row coils for low-temperature hot water systems. They can be installed on the wall and on the ceiling. |
|
| The HELIOS unit heaters, built with the same criteria of sturdiness and safety that define all Sabiana products, stand out for the splendid new design of the casing, made using anodised aluminium bars and polished die-cast corners. They have the same big heart as the Atlas unit heaters: a coil that has been conceived, designed and manufactured specifically for heating industrial environments. The thickness of the pipes, steel as standard, the diameter (Ø 22 mm) and the excellent ratio between the flow-rate of air and the heat output guarantee long life and exceptional comfort. |
|
Our new range of hot air generator Aircalo series “Aquitaine 2000” of modern design and production meet present technical installation and use requirements.
This equipment is in accordance with European directive related to gas fired equipment 90/396/CEE under n° 49AQ1369 and 1370 and electro-magnetic compatibility CEM 89/336/CEE and low voltage 73/23/CEE.
No asbestos based or derivates are used in the production. This new range of 25 models covers a wide scope of powers from 18 to 800 kW, with flows varying from 1 800 to 49 000 m3/h.
This range was designed after full analysis of the new thermal and acoustic requirements within buildings and take into account the main criteria :
- Easy use and maintenance
- Money saving operation
- High efficiency (85 to 94 % depending upon type of equipment and range of use)
- Small size dimensions
- Materials that can be recycled up to 95 %
- Ergonomic design
- Best quality vs price ratio.
Two versions are proposed for internal or external used :
- vertical
- horizontal
Numerous standard options are available :
- exchanger/body in stainless steel
- control for modulating burner
- direct blowing cover
- extra filter box
All special applications may be studied on request.
|
|
DESCRIPTION:
Completely autonomous industrial hot air generator that operates with heating gas oil, natural gas or petroleum liquefied gases (butane gas, propane gas).
These equipments function is that one of heating the environmental air by using the thermal energy produced by the equipment. The produced heat is driven to the premises that must be conditioned by means of one or two centrifugal fans.
Combustion products are extracted through a chimney in order to ensure that the driven hot air is exempt of smokes and bad smells.
The main features are the following ones:
- Heating gas oil, natural gas or petroleum liquefied gases operation.
- Closet made with galvanised sheet with polyester dust cover and dried in the oven at 200ºC.
- Combustion oven designed for obtaining a performance of 90%.
- Electronic control with a viewer of the temperature driven into the local.
- Environmental thermostat included in the equipment.
- Base equipment prepared for being connected to air distribution pipes. You can ask for a four-direction air distribution box with air directional grids.
- Possibility of joining a digital hour programmer for starting the equipment up and stopping it according to user necessities.
FUEL:
Heating gas oil / natural gas / LPG
APPLICATIONS:
Medium and big industries, events marquees, greenhouses, farms and whatever premises with a volume between 2.000 and 3.115 m3 approximately.
|
|
- Automatic built-in oil burner (Danfoss gear pump)
- Electronic flame-control
- Possibility of interface with thermostat or humidistat or timer
- Power cord with plug
- Stainless steel combustion chamber
- Double skinned combustion chamber for thermo-acoustic insulation and safe low surface temperature
- Automatic post ventilation of unit
|
|
-Complete range from 3.3 to 22 KW
-For use in dry and enclosed buildings
-Operate exclusively on a 230 V single phase electrical supply ( ET3 ) or 400 V 3 phase
( other models )
-Reduced size and weight for ease of transport
-Transport handles
-Very quiet fans
-Integrated ambiant thermostat as standard
-Selector allows the operation of ventilation only,
half power or full power
-Overheating security with manual re-arming
-Motor entirely integrated inside the body shell
-ET3 delivered with cable and electrical plug
-Other models fitted with a male electrical plug mounted on the apparatus |
|
-Direct fired heaters
-Stainless steel combustion chamber
-Exterior body shell in double steel panels
-Very high air supply temperature
-Integrated automatic fuel burner with high pressure pump
-High air flow output axial fan
-Power supply in 230 V single phase
-Integrated fuel tank for a long autonomy
-Designed for outdoor use even in the rain or snow
-Overheating thermostat
-Inspection hatch allowing easy access to burners and electrical equipment
-Multiple configurations of air supply conveyors
-Kit for connection with an external fuel tank ( optional )
Mobile warm air heaters with fuel burner |
|
radiants gas
Comfortable: temperature sheaths 200° C.
5 burners from 35 to 300 kw, length of the network of sheath up to 324 m*.
Sheath monotube linear with generator 300 kw.
Buildings of great volume and up to 14 m height.
Buildings requiring a burner outside (maintenance, fire hazard...). |
|
| ... products without information |
| |
|
|
Air heaters, Hot air generators
