|
|
|
|
|
|
Elycold laminates are manufactured by a discontinuous process allowing “natural” curing of the composite. By avoiding the thermal shock typical of a continuous process Elycold laminates are guaranteed perfect planarity, feature that is critical to achieve top quality panels. A thick layer of UV-resistant gel-coat resins with low styrene content and low shrink factor are employed to assure:
- perfect covering of the underlying fibres.
- excellent weatherability for as long as the panel is operational.
- total water resistance of the surface and consequent protection of insulating core.
- low yellowing index certified by UV-CON test.
The use of chopped fibreglass MAT assures high dimensional stability. A variety of MAT weights is available to which WOVEN ROVING with various specifications may be added to increase mechanical resistance. The combinations obtained make ELYCOLD available in a wide range of types and thicknesses..
Main uses of ELYCOLD
- Insulated panels for refrigerated vehicles.
- Motor homes and caravans.
- Direct sales vehicles.
- Cold storage.
- Cladding and rehabilitation of hall with hygienic perquisites.
- Exterior coating of road tankers and containers.
- Prefabricated houses.
- Billboards.
|
|
ELYPLAST laminates made of fiberglass reinforced polyester resin in corrugated and flat rolls.
CORRUGATED rolls are used in agriculture applications for front and side cladding of greenhouses with cantilever roofs. In building, they are used to built pergola roofing and temporary roofs on building sites.
FLAT rolls are used in building, in agriculture and the refrigeration industry.
|
|
Lightben
Lightben is an ultra-light composite panel produced bonding a core made on Polycarbonate transparent cylinders to external layers in Polycarbonate, PETG or acrylic in various finishes and several standard colours. The Lightben particular core structure creates a partial transparency which varies according to the visual angle, while the external layers allow a variation in transmittance and colour shading of the light. Thanks to these special aesthetical features and an outstanding lightweight and stiffness, Lightben is suitable for a wide variety of indoor applications. Easy to cut Lightben panel can be finished with standard accessories profiles and systems such as frames, handles, hinges. Lightben can also be edged with the same material used for the external layers.
|
|
|
Politec MODULIT 500LP is a polycarbonate modular panel, Uv protected by co-extrusion on external side, mainly used for vertical or sloped glazings. The high thickness of 40 mm and the internal structure with diagonal ribs combine excellent mechanical properties and thermal insulation, allowing important energy and structure saving. Available in a large range of colours (also on client request), it is completed by simple aluminium profile or with thermal cut, EPDM gaskets and aluminium fixing hooks required to fix panels to the bearing structure.
|
|
SUNLITE X-Lite delivers improved loading capacity and increased stiffness to the SUNLITE product line. SUNLITE X-Lite's reduced weight and bigger spans between supporting raftetrs result in significant cost reduction of the overall roofing structure. SUNLITE X-Lite is uniquely designed to suit both the construction and DIY markets.
Features at a glance
- Lightweight with no compromises
- Better Strength than 5 and triple wall
- Improved mechanical properties
- Better resistance to local compression
- Increased distance between supports
- Considerable impact resistance
- Considerable light transmission
- Weather and UV resistant properties retained for years
- High energy-saving thermal insulation
- Easy to handle and install
|
|
|
Panelite™ Laminated Series panels consist of pre-fabricated fiberglass facings laminated to a structural honeycomb core. At only 1 pound per square foot, they are the lightest weight honeycomb panel in the Panelite™ line, and their inherent stiffness allows for minimal installation details without the need for additional structural members. They are ideal for such applications as vertical walls, ceilings, signage, sliding and pivoting doors.
|
|
|
Politec HR polycarbonate sheets offer both high comfort with an important reduction of the internal temperature and high transparency. Politec HR sheets therefore reduce the penetration of the solar energy by limiting the penetration of the infrared rays. The exclusive special additive doesn't damage the visible range and keeps the light transmission almost unchanged. These sheets offer a good ratio light transmission / solar energy.
|
|
|
Easy, quick and safe: CLICK 16 is a system for roofings and glazings and is ideal for flat roofs and small areas such as carports, winter gardens, penthouses, greenhouses. The assembly is so simple that CLICK 16 can be easily installed by a not specialized staff and is ideal for do-it-yourself.
|
|
|
POLISNAKE is an extruded multiwall sheet planned and developed thanks to the synthesis of the highest knowledge in the extrusion technilogy. This sheet brings all the properties of polycarbonate sheets to the highest level, increasing the extreme collapse load up to 50% compared with sheet with the same weight and thickness. The original, unique and pleasing look of POLISNAKE allows new architectural solutions by exalting the characteristics of this structure.transparency, light transmission and thermal insulation don't change in POLISNAKE structure. The UVprotection, by co-extrusion, ensures the stability of physical and mechanical properties in time.
|
|
High quality multiwall polycarbonate extruded sheets, offering high transparency, excellent mechanical resistance (almost 200 times stronger than glass of an equivalent thickness) and high termal insulation properties.
Coextruded U.V. protection on one or both sides grants a long life expectancy.
Politec STD sheets are produced to both standard and special sizes and are used for glazing great objects as well as for skylights, northern lights, greenhouses, DIY, sign, etc..
The thickness range is from 4mm to 60mm.
|
|
|
Politec POLI-CHROME sheets are produced with a technology allowing to dose differnt colours between the external and the internal side of sheets. This characteristic allows to integrate POLI-CHROME sheets in every architectural context and to obtain two differnt finishing effects between outside and inside. Thanks to this technology it is possible to proportion both the quality of the light and shadow.
|
|
Hexaben Large
Ultra-light composite panel with a honeycomb aluminium core and cells of great dimension, bonded to external layers in acrylic with a wide range of finishing and standard colours. Hexaben Large is a composite panel characterized by a strong technological feature thanks to its honeycomb aluminium core borrowed from higher technological applications such as the aerospace ones and for which this honeycomb core was originally designed.
Thanks to this higher aesthetical value joined to the light weight, stiffness and transparency, Hexaben Large is mainly used for indoor architectural, design and furniture applications.
Easy to cut Hexaben Large panel can be finished with standard accessories profiles and systems such as frames, handles, hinges. Hexaben Large can also be edged with the same material used for the external layers.
|
|
Starlight
Composite panel with inner patented macro-cellular translucent SAN core bonded with external layers in Acrylic offered in various finishes and standard colours. Thanks to its characteristics of lightweight, stiffness, translucency and unique aesthetical feature resulting from the geometrical pattern of its core, this structural panel has a wide variety of indoor applications. Easy to cut Starlight panel can be finished with standard accessories profiles and systems such as frames, handles, hinges. Starlight can also be edged with the same material used for the external layers
|
|
|
Akyver® 4 Wall provides 25% more insulation than a twin-wall sheet of comparable thickness.
|
|
PALSUN flat solid polycarbonate panel presents a powerful combination of clarity and impact resistance. PALSUN is virtually unbreakable, yet it is transparent as glass at less than half its weight. PALSUN can be cold bent, fabricated and formed, making it ideal for applications such as barrel vault roofing, skylights, architectural roofing and glazing. Clear, translucent or opaque, PALSUN sheets are also ideal as machine guards, sound barriers, antivandal and safety glazing.
Main Benefits
- High impact resistance - Virtually unbreakable
- High clarity and light transmission
- Weather and UV resistant
- Wide service temperature range
- Blocks harmful UV radiation
- Good acoustical insulation
- Lightweight
- Easy to handle and install
- Versatile, formable, and machinable
|
|
Monolithic (solid) sheets in different thicknesses and dimensions with versatile possibilities of application inside and outside.
Due to excellent transparency, resistance and durability of Ihe Polycarbonate (PC) the AKRA®PLUS sheets are particularly suitable whenever high transparency and impact strength are required, especially for domed applications, as the sheets are easily cold bended.
Thanks to the crystalline transparency and the durability of Polymethylmethacrylate (PMMA), the AKRA®GLAS sheets are the ideal solution, when highest transparency is required. Because of the higher rigidity compared with polycarbonate, they suit particularly for flat applications.
|
|
System composed of a wide choice of panels with lateral tongue and groove joint in multi-wall polycarbonate and accessories for fixing on the structure.
The fact that there are no junction profiles, makes the wall uniform, so that an excellent aesthetical effect is combined with easy installation.
APPLICATIONS AND USE
- Wall glazing (outside and inside)
- Light strips in industrial buildings
- Sheds
- Continuous translucent pendant ceilings
PROPERTIES:
- Transparency
- Impact strength
- Durability
- Thermal insulation (up to 1,1 WfmK depending on panel type)
- Resistant to high wind loads
- Lightness
- Easy and fast installation (lateral tongue and groove joint)
- Length on size (up to transportation limits)
- Fire certificates
|
|
|
Panelite™ Laminated Series panels consist of pre-fabricated fiberglass facings laminated to a structural honeycomb core. At only 1 pound per square foot, they are the lightest weight honeycomb panel in the Panelite™ line, and their inherent stiffness allows for minimal installation details without the need for traditional structural members. They are ideal for such applications as vertical walls, ceilings, signage, sliding doors, pivoting doors, and are compatible with PaneliteTM Framing Systems.
|
|
New Design-Series COLOR, BI-COLOR und DECO-COLOR gives new possibilities in design of facades and interior rooms. Within the use of graduated color panels you get distinctive design- and light effects.
General features:
- A co-extruded UV protection-layer on the outside secures the positive material characteristics and stops the UV transmission up to 380 Nm
- 10 years guarantee according to guarantee declaration
- Standard B1 – high flammable resistant
- Opal-Antiblend surface with a light diffusing pigment for optimal non blinding nature light
- Approved ball and hail impact property HF-Q Qulity, so the panels does not disturb radar activity
|
|
Besides the traditional exteriour applications, more and more PC panels and multi-wall-sheets are used for constructions on a fair or other interiour applications. The PC elements can both be used in a functional and decorative way.
Therefore, RODECA has introduced a range of standard colours, of which even smaller quantities can be produced.
Our special panel with 16 mm thickness and 200 mm width is the perfect solution for this variety of applications and meets the designers' ideas.
Should a better statics be required, a 40 mm thick panel is also available.
|
|
| ... products without information |
| |
|
|
Polycarbonate panels
