Commercial bike racks

... the wheel. Stemming from a street regeneration project in the old quarters of Hertogenbosch (Netherlands), this elegant bike rack provides a solution to the growing need for bicycle parking in many cities.

Bicycle rack with simple and friendly forms.Manufactured in high-density polyurethane foam that generates a body which is pleasant to the touch, aimed at humanising the city. Designed to update an urban element that ...

Modular, secure bike rack that can be joined together in rows. The minimum unit has the capacity for four bikes, and can be extended with as many more units as required for greater parking ...

Elliptical shaped bike racks and/or pedestrian bollard, with vertical cut for inserting wheel made of Ultra High Performance Concrete (UHPC). Available in ALFA finish. Fixings: cemented to ground with ...

Bike rack / pedestrian bollard made in extruded aluminium, reinforced with a tubular steel insert. From the front, fixed on both sides, is a shaped steel plate, upon which it is possible to add aesthetic ...

Single or double sided modular bicycle parking system on two levels, with sliding motion of the upper level. GALVANIZED STEEL FIXINGS: PRE-DRILLED FOR ANCHORS

The bike rack SIDE is made in steel 50/10 thickness. It is the result of the continuous welding of 2 elements and on the base there are 2 holes 14 mm diam. for the fixing to the ground through specific ...

The bike rack is made in steel sheet 60/10 thickness. The loop-shaped elements of the bike rack are welded to the plate with an interaxis of 65,2 cm. On the plate there ...

The structure of the bike rack of the Bend collection is made of a profile, made in laser-cut steel sheet 80/10 thickness, on which 2 support profiles made in laser-cut steel sheet 50/10 thickness, are ...

... thanks to the slots made ​​by laser cutting recalling the natural veins of leaves. Essential and minimal in its form, the rack NATURA is available in several colors. COMPOSITION: - 4 laser cutting modules steel ...

1 bicycle parking for each module COMPOSITION: steel structure, bent and milled, mm 8 thick, with 2 holes (diameter mm 16) for fitting to the ground,with lock. FINISH: available Corten,Aisi 304 Satin, in white aluminium RAL ...

COMPOSITION: - 2 vertical plates in steel, 8 mm thick, laser suitably shaped to allow the anchoring of bicycles. - 1 base and 1 upper plates welded to the vertical plates in steel, 8 mm thick, fitted with 2 holes with a diameter of ...

Cycle rack in galvanized and powder coated steel tube with extruded powder coated aluminum that encloses the side rubber strip to protect the bicycle. LED strip lighting on request.

Straight cycle rack in galvanized and powder coated steel with concrete bases or base plates.

Bicycle rack in galvanized and powder coated square steel tube and stainless steel or galvanized and powder coated steel plate with base plate and rubber strip that protects the bicycle.

A stand with a minimalist circular form for a unique side profile. It is composed of a pair of materials: a galvanised steel frame on the inside, with an external coating of durable rubber. The ring is seated in a subtle aluminium alloy ...

This modest bicycle stand harks back to the range of Lotlimit railings and its essential contours can be easily integrated into any potential project. The stand reflects both contemporary and historical architecture. Anchored under under ...

This modest bicycle stand harks back to the range of Lotlimit railings and it sessential contours can be easily integrated into any potential project. The stand reflects both contemporary and historical architecture. Anchored under ...

length / width / height: 575 / 60 / 900 Complete model in stainless steel with a powder-coated surface in several in-house colours, several DB-colours and in RAL-colours smooth matt. The on-site installation can be done by bolt-on or concrete-in.

length / width / height: 1000 / 60 / 900 Complete model in stainless steel with a powder-coated surface in several in-house colours, several DB-colours and in RAL-colours smooth matt. The on-site installation can be done by bolt-on ...

length / width / height: 1000 / 60 / 900 Complete model in stainless steel with a powder-coated surface in several in-house colours, several DB-colours and in RAL-colours smooth matt. The on-site installation can be done by bolt-on ...

Material: tubular steel Ø30 and Ø25 mm, hot-dip galvanized. Powder coating: RAL colour to choose. Fixation: fixed in the ground, surface mounting, free-standing.

Material: tubular steel Ø30 and Ø25 mm, hot-dip galvanized. Powder coating: RAL colour to choose. Fixation: fixed in the ground, surface mounting, free-standing.

Material: tubular steel Ø30 and Ø25 mm, hot-dip galvanized. Powder coating: RAL colour to choose. Fixation: fixed in the ground, surface mounting, free-standing.

The Hoop bicycle stand is a multi-functional urban design that can also function as a bollard. The design is simple, consisting of a single aluminium post where multiple bicycles can be securely fastened. The upper ring is positioned ...

... parking is required or an attractive substitute for outdoor bicycle racks in commercial areas. Blenda’s sleek, space-saving shape is an excellent alternative to outdoor bicycle racks ...

This striking cycle stand was created by a designer who is herself a keen cyclist. Designed with enthusiasm as well as practicality, this cycle stand is deliberately ...

... Bicycle Racks have a minimalist design combined with warm, thick-walled CorTen steel. Fitting CorTen Bicycle Racks with a standard plastic All Black anti-damage strip prevents damage to bicycle frames. ...

The Bike-Key Bicycle Rack is a bicycle stand with a contemporary design. The R&R hardwood beam of 7x15cm - 3x6 is anchored to the surface with poured concrete or by means of a separately available steel ...

Solid Bicycle Racks are basic lean-support racks fitted with a sturdy wooden top beam measuring 7x7cm - 28”x28”. They are part of Streetlife’s Solid product range. The untreated and sustainable FSC® hardwood ...

No better way than to take the recognizable letter "P" for Parking to create bike-bespoke urban furniture. This was the inspiration for the ZENITH bike parking system which stands out from so many others. ...

PHENIX bike stands have a highly individual form with an extremely attractive contour in curved stainless steel tubing linked to a round mounting plate tailored to cycle parking, and which will weather the test of time.

The ANTARES bike stand in the form of a half-wheel is essential for securing bike frames and wheels. Users have no problem identifying the item, particularly when installed in 4 to 5 cycle ...

BØY is a simple bicycle rack for two bicycles. Its sturdy tubular design is able to withstand rough usage in urban environments, and BØY encourages tidy cycle parking. The steel details are hot-dip galvanised (901) and ...

The CITY bicycle post is a classic bicycle rack made from lacquered cast iron. The rack is designed for two bicycles and is mounted on a separate in-ground base. It comes in black (RAL 9005 Jet black) ...

... / Width : 51 cm / Length : 33 cm / Structure / Galvanized steel sheet, thickness 4 mm / A laser-cut slot to lock the bike. Compatible to every lock /

Height above ground : 110 cm / Steel base : diameter 11 cm / Terracotta or brushed stainless steel part : diameter 7 cm / Steel head : diameter 7 cm / 1 Ring in steel tube diameter 2 cm / Ring width : 71 cm / Finish : Shot-peening ...

Height above ground: 80 cm / Width : 50 cm / Aluminium section : 40 x 22 mm / Finish : 1 chemical etching treatment + 1 trimetallic phosphatation + 1 epoxy-polyester powder coating / Ral colour of choice / To be embedded /

... outdoor bike stand with advertising panel CYCLE-12P completes the street furniture in parks, streets, alleys, college campuses, residential areas, parking lots and is designed for bicycles parking. Outdoor Bike ...

The bike rack BICYCLE-2 completes the street furniture in parks, streets, alleys, college campuses, residential areas, parking lots and is designed for bicycles parking. Fixing Cycle Rack: The ...

... bicycle rack PARK-5 completes the street furniture in parks, streets, alleys, college campuses, residential areas, parking lots and is designed for bicycles parking. Pipe diameter: ø22 mm, ø34 mm Street Bicycle ...

Material Metal, powder coating Depth (mm) 80 Width (mm) 850 Height (mm) 850

Material Metal, powder coating Depth (mm) 80 Width (mm) 850 Height (mm) 850

SCOOTER galvanized or AISI 304 stainless steel scooter rack. Rounded shapes in order to park scooters. Modular park area to park 6-10-13 scooters, ideal to optimize space and secure scooter with chain / chain lock.

SCHOOL galvanized or AISI 304 stainless steel scooter rack. Rounded shapes in order to park scooters. Modular park area to park 6-9-12 scooters, ideal to optimize space and secure scooter with chain / chain lock.

ROLLER galvanized or AISI 304 stainless steel scooter rack. Rounded shapes in order to park scooters. Modular park area to park 6-9-14 scooters, ideal to optimize space and secure scooter with chain / chain lock.

Ground mounted bicycle rack GM07-03 with special design. 3 racks on plate These kind of racks are used near commercial centers, shops, on parking, in parks and so ...

... steel bicycle rack GM16 with a crossbar for additional fixation of bikes • Pipe diameter Ø 50 mm • Rack size 800х800 mm • Footpace: Ø150x6 mm • For mounting on ground Sizes: GM16-01 ...

P- shaped ground mounted bicycle rack GM06 with design specially for parking. Pipe diameter Ø42 mm 1 racks size 700x900 mm Any RAL color. Powder or thermoplastic coating Manufacture of coated, ...

... cyclotouristic excursions or in host establishment, the Easy Rack is light, practical and can welcome a consequent volume of bikes

... installed anywhere. You can add others to make it longuer. It allows bike parking. Uses For informative stops in the Tourist Office, cultural visits, shopping, stations in playgrounds or public parks. Easy ...

Totem 360 ° Bike rack Uses For informative stops in the Tourist Office, small cultural visits, shopping IN small shops or open market Easy and mobile installation. Weather resistant. Harmony with heritage ...

B PARK bicycle rack is a simple and smart modular system, composed by a concrete base with space for two bicycles, which can be used as a singular module or as group repeating the base module. Material: Concrete and ...

Material: Iron Weight: 32 kg Dimensions: 70 x 30 x 60 cm

Main materials used: - Reinforced concrete - Hot galvanized steel

Main materials used: - Painted electro galvanized steel

The CLAPS bike rack is made by the folding of a 50/10 thick single steel sheet, laser shaped with the “CLAPS” decoration. Ground fixing by brackets with 6 trough for M8 suitable bolts (not included). Dimensions ...

The SNAKE bike rack is made of 30/10 thick cold galvanised and polyester powder coated steel, reinforced with a 30/10 thick steel bracket. The ground fixing is with 4 suitable bolts (not supplied) on ...

The RIO TOTEM bike rack is made of a squaresectional tubular steel, 100×100 thickness 20 mm, then cold galvanized and polyester powder coated. Some plates thickness 60/10 are welded to the bar to secure ...

ABES Bicycle-Stand 450-1 is a frame made from bent steel tubes with a 42,4 x 2,5 mm diameter, a vertical rear tube, and mutually offset tube ends. Only one foundation is required. Optional: convex cover plate with a 300 mm diameter. Mounting Concrete ...

ABES Bicycle-Stand 450-2 is a frame made from bent steel tubes with a 42,4 x 2,5 mm diameter, an overhanging rear pipe, as well as mutually offset pipe ends. Only one foundation is required. Optional: convex cover plate with a 300 mm ...

ABES Bicycle-Stand 450-5 is five frames arranged next to each other at a 45° or 90° angle to the base strip. The frames are made from bent steel tubes with a 42.4 x 2.5 mm diameter, a vertical rear tube, and mutually offset tube ends; ...