Bike racks

Bike rack in steel tube composed of a circle-shaped element with a central support with base plate and inclined currents. The bike rack allows to secure the bike ...

Modular bike rack composed of a steel structure made of two vertical supports and a horizontal aluminum bar, equipped with aluminum supports for bike handlebars, positioned at two different ...

Cycle stand composed by two connected semi-circle shapes in thick steel plate, connected with horizontal supports with baseplate. Can also be used as a modular barrier. FIXINGS: PRE-DRILLED FOR ANCHORS

The SIDE floor bike rack is a minimalist and elegant solution for securely parking bicycles in public spaces. Made entirely of robust steel, SIDE stands out for its simple yet solid structure, combining ...

The FLUXUS bike rack is distinguished by a dynamic, flowing design that reflects the continuous and fluid movement suggested by its name. The looped elements seem to undulate, creating a sense of lightness ...

The WAVE bike rack captures the essence of movement with a design reminiscent of the softness and fluidity of ocean waves. The shaped spacers that accommodate the wheels create a harmonious flow, like ...

Modular vertical bicycle racks consisting of a V-shaped steel supporting structure to which three low and three high stalls are fixed alternately. The latter are made of steel sheet. All metal parts are galvanised and ...

Bicycle rack in galvanized and powder coated square steel tube and stainless steel or galvanized and powder coated steel plate with base plate and rubber strip that protects the bicycle.

Ekeberg enables individual bicycles to be parked in place and held upright. Ekeberg’s frame can hold the bicycle’s front wheel securely, while also providing an upright post where the bicycle frame can be securely locked. An excellent ...

The Draken bike rack was originally designed for Olof Palmes plats in Gothenburg, home to the Draken cinema. Inspired by 1950s architecture, the rack's simple lines and fine details create ...

Designed with practicality in mind, this cycle stand is deliberately streamlined to facilitate use. Sustainable design and environmentally-friendly. The sleekness and simplicity of Fogdarp uses less material ...

The AGO bike rack is made of cold galvanized and polyester powder coated 8-mm thick steel. On the folded part there is a hole to lock the anti-theft chain. Ground fixing is by cementing with a 150-mm ...

The SQUARE bike rack is made of squaresectional tubular steel 40x40x2 mm, then cold galvanized and polyester powder coated. Ground fixing is on 2 8-mm thick plates with 2 holes (diam. 10 mm) or by cementing ...

The RING bike rack is made of tubular steel diam 50×2 mm, then cold galvanized and polyester powder coated. Ground fixing is on 2 10-mm thick plates through 2 holes (diam. 10 mm) or by cementing with ...

length / width / height: 700 / 85 / 800 Complete model in stainless steel with a powder-coated surface in several in-house colours, several DB-colours and in RAL-colours smooth matt. The on-site installation can be done by bolt-on or concrete-in.

length / width / height: 575 / 60 / 900 Complete model in stainless steel with a powder-coated surface in several in-house colours, several DB-colours and in RAL-colours smooth matt. The on-site installation can be done by bolt-on or concrete-in.

length / width / height: 1000 / 60 / 900 Complete model in stainless steel with a powder-coated surface in several in-house colours, several DB-colours and in RAL-colours smooth matt. The on-site installation can be done by bolt-on ...

The ABSOLUT© bike racks provide an optimal solution to the growing demand for urban bicycle parking. Their sleek design and functionality set them apart from traditional racks, blending ...

The KAISEKI© bike rack seamlessly combines functionality, aesthetics, and sustainability for urban spaces. Designed to secure all types of bicycles, it promotes eco-friendly mobility while fostering a ...

As stylish as it is functional, the SERPENTINE© bike rack is an essential ally in urban planning. Ideal for tourist spots, near train stations, or in bustling squares, this bike rack ...

1 steel D70 or D130 Vesta post, height above ground 1 m. 1 steel single ring, diameter 2 cm. To be embedded.

1 aluminium upright section 8 x 6 cm with a natural lacquered cast aluminium head. Curve ring in aluminium section 40 x 22 mm. To be embedded.

Solid steel structure section 35 x 15 mm. Natural lacquered solid aluminium handrail. To be embedded or plate for bolting on threaded rods on request.

MATERIAL: METAL, HOT DIP GALVANIZED FRAME: TUBULAR STEEL Ø30MM AND Ø25MM POWDER COATING: RAL COLOR TO CHOOSE FIXATION: FIXED IN THE GROUND, SURFACE MOUNTING, FREE STANDING

FRAME: TUBULAR STEEL Ø30MM AND Ø25MM POWDER COATING: RAL COLOR TO CHOOSE FIXATION: FIXED IN THE GROUND, SURFACE MOUNTING, FREE STANDING

FRAME: TUBULAR STEEL Ø30MM AND Ø25MM POWDER COATING: RAL COLOR TO CHOOSE FIXATION: FIXED IN THE GROUND, SURFACE MOUNTING, FREE STANDING ADFC proved!

... wooden crossbeam (locust wood) that protects bike frames from scratches. Its integration is easy and swift. With three ground anchor points, a dynamic design, and sustainable manufacturing, this bike ...

Bike attachment plug for urban bollards Cyclaccroche combines durability, modularity, and design to secure bicycles without using ground space or requiring roadwork. Adaptable to all types of bollards, with customizable ...

... to charge your smartphone or any other device during a short break or an extended stop. For the smart city, the Pivot series rack is equipped with integrated solar panels, perfectly in line with the needs and trends of ...

1 bicycle parking for each module COMPOSITION: > steel structure, bent and milled, mm 8 thick, with 2 holes (diameter mm 16) for fitting to the ground,with lock. FINISH: > available Corten,Aisi 304 Satin, in white aluminium ...

... thanks to the slots made ​​by laser cutting recalling the natural veins of leaves. Essential and minimal in its form, the rack NATURA is available in several colors. COMPOSITION: > 4 laser cutting modules steel ...

... for an entire aesthetic coherence, the bike parking of the same name allows the secure fastening of the frame and wheel. Its fully refined P shape (for “parking”), is of pure discretion and renders the Zénith bike ...

Its minimalist design hides a true technical performance in the bending of stainless steel. This ambivalent simplicity / complexity makes it a furnishing apart which magnifies the nobility and the aesthetic qualities of the brushed stainless ...

The invisibly welded T profile used for the posts of this bike stand comes from the Antarès bollard. This offers the Antarès bike stand very great resistance as well as a graphic and minimalist design ...

The Rough&Ready (R&R) Bike Rack is a robust support stand for bicycles. Thanks to the hole in the steel leg, bicycles can be secured with a chain lock. The untreated, sustainable wood will not damage ...

The Rough&Ready (R&R) Bike-Key Bike Rack is a bicycle stand with a contemporary design. The R&R FSC hardwood beam of 7x15 cm – 2.8”x5.9” is anchored to the surface with poured concrete ...

The Clip Bike Rack, being as simple and inconspicuous in the streets as a paperclip on a desk, can be applied anywhere: from monumental areas to modern architectural surroundings. This timeless design ...

... the Arches Bike Rack–Single together with the Arches Bench, Arches Recycling Receptacle and Arches Litter Receptacle are the ideal complements to our Evos® and Weevos® playsystems and other playgrounds ...

Cineo bike stand - Street furniture. Line made from steel tube, 80 x 40 mm. Low Cinéo model Height above ground 900 mm, seal 200 mm Zinc coating then baked polyester powder coating. Plate-mounted version

Connexion bike stand - Street furniture. Model made from steel tube, 80 x 40 mm. It shape blocks the bike on the fitting before attaching it. Height above ground 740 mm, 830 x 280 mm Seal 200 mm. Zinc ...

Omega bike stand - Street Furniture. Made from curved steel or stainless steel tube, ø 60 mm. Low models with depth of seal 200 mm and signage models with depth of 300 mm. Low ​Oméga Height above ground 1000 mm Steel ...

... even more resistant to aggressive weather conditions. It provides parking for seven bikes and the mounted rings allow locking to the stand. Through its design, the bike rack 166 makes ...

... administrative buildings, schools, universities, metro stations and other public areas. Ensure your peace of mind and the safety of your bike with a bicycle stand model 258 of the company Encho Enchev - ETE.

Bike rack made out in combination of high-performance concrete and metal. Two materials that combine strength and stability. The concrete is reinforced and fiber strengthened. The aggregate structure ...

... functional stand with aesthetic qualities that are hard to find elsewhere on the market. The unique concept of the stand for three bikes allows you to create interesting parking stations. Elk’s clean design and gentle ...

The closed circle. This is Gomez. A stand with a minimalist circular form for a unique side profile. It is composed of a pair of materials: a galvanised steel frame on the inside, with an external coating of durable rubber. The ring ...

... simple frame finished with a horizontal wooden element perfectly supports the bicycle, which can be parked on both sides. The bike stand is tilted at the same angle as the feet of the Blocq bench, so it fits perfectly ...

... friendly bicycle racks by URBANTIME. The racks are modular elements, which can also be attached by means of plates to the other elements of the collection. This is how practical seating and hooking compositions ...

... Pin Rack is a secure bicycle rack, providing a parking option that is ideal for libraries, offices, storefronts, parks, and other public places of importance. Inspired by the style of the pin you see ...

The Leaning Post and Ring bicycle rack is an ideal bike parking stand that provides effective bike parking, with an updated look on standard designs! The ring on this bike ...

The Octopus Bike Rack is a unique, secure bike parking option that adds a fun element of street art to any space. This rack is perfect for aquariums, beaches, schools, ...

Bike rack 1-2 places made of hot-galvanized steel. Cylindrical pole Ø60 mm with two rings Ø30mm for bike positioning Fastening : Fixing to floor "0" through extension of the Net ...

5-seater bike rack made of hot-galvanized steel. The bike rack allows you to create rest areas for Bikes. In particular this product can be located ...

5-seater bike rack composed of two lateral columns in galvanized iron hot with base and upper sphere in cast iron EN GJL 200 (UNI EN 1561) which support the rack composed of 5 bicycle ...

Double-sided rack, metal ends • cm 225x75x46h - kg 60 • cm 315x75x46h - kg 72

... Available options: with metal racks also available in stainless steel (D model) and with concrete or steel bases (C and G models); steel versions for 1 or 2 bikes created to allow easy wheel and/or frame ...

... private or communal areas. Available options: with metal racks also available in stainless steel (D model) and with concrete or steel bases (C and G models); steel versions for 1 or 2 bikes created ...

The steel bicycle rank is adjusted to the L pot. It was created in response to the growing trend of riding a bike. An additional function of the construction is an information stand with a map. Steel spans guarantee safe ...

The steel bicycle rank compatible with the XL pot. It was created in response to the gro -wing trend of riding a bike. An additional function of the construction is an information stand with a map. Steel spans guarantee ...

Finishing options: Standard set Powder-coated steel bicycle stand. Installation included. Premium set Powder-coated steel bicycle stand. Installation included.

Stand for rowey U – example of 4 modules Details Product code 0013008 Inclusiveness No