Public space bike racks

Elliptical shaped bike racks and/or pedestrian bollard, with vertical cut for inserting wheel made of Ultra High Performance Concrete (UHPC). Available in ALFA finish. Fixings: cemented to ground with ...

Bike rack / pedestrian bollard made in extruded aluminium, reinforced with a tubular steel insert. From the front, fixed on both sides, is a shaped steel plate, upon which it is possible to add aesthetic ...

Single or double sided modular bicycle parking system on two levels, with sliding motion of the upper level. GALVANIZED STEEL FIXINGS: PRE-DRILLED FOR ANCHORS

The bike rack SIDE is made in steel 50/10 thickness. It is the result of the continuous welding of 2 elements and on the base there are 2 holes 14 mm diam. for the fixing to the ground through specific ...

The bike rack is made in steel sheet 60/10 thickness. The loop-shaped elements of the bike rack are welded to the plate with an interaxis of 65,2 cm. On the plate there ...

The structure of the bike rack of the Bend collection is made of a profile, made in laser-cut steel sheet 80/10 thickness, on which 2 support profiles made in laser-cut steel sheet 50/10 thickness, are ...

... the wheel. Stemming from a street regeneration project in the old quarters of Hertogenbosch (Netherlands), this elegant bike rack provides a solution to the growing need for bicycle parking in many cities.

Bicycle rack with simple and friendly forms.Manufactured in high-density polyurethane foam that generates a body which is pleasant to the touch, aimed at humanising the city. Designed to update an urban ...

Modular, secure bike rack that can be joined together in rows. The minimum unit has the capacity for four bikes, and can be extended with as many more units as required for greater parking ...

Material Metal, powder coating Depth (mm) 80 Width (mm) 850 Height (mm) 850

Material Metal, powder coating Depth (mm) 80 Width (mm) 850 Height (mm) 850

1 bicycle parking for each module COMPOSITION: steel structure, bent and milled, mm 8 thick, with 2 holes (diameter mm 16) for fitting to the ground,with lock. FINISH: available Corten,Aisi 304 Satin, in white aluminium RAL ...

... thanks to the slots made ​​by laser cutting recalling the natural veins of leaves. Essential and minimal in its form, the rack NATURA is available in several colors. COMPOSITION: - 4 laser cutting modules steel ...

COMPOSITION: - 2 vertical plates in steel, 8 mm thick, laser suitably shaped to allow the anchoring of bicycles. - 1 base and 1 upper plates welded to the vertical plates in steel, 8 mm thick, fitted with 2 holes with a diameter of ...

Cycle rack in galvanized and powder coated steel tube with extruded powder coated aluminum that encloses the side rubber strip to protect the bicycle. LED strip lighting on request.

Straight cycle rack in galvanized and powder coated steel with concrete bases or base plates.

Bicycle rack in galvanized and powder coated square steel tube and stainless steel or galvanized and powder coated steel plate with base plate and rubber strip that protects the bicycle.

MATERIAL: METAL, HOT DIP GALVANIZED FRAME: TUBULAR STEEL Ø30MM AND Ø25MM POWDER COATING: RAL COLOR TO CHOOSE FIXATION: FIXED IN THE GROUND, SURFACE MOUNTING, FREE STANDING

MATERIAL: METAL, HOT DIP GALVANIZED FRAME: TUBULAR STEEL Ø30MM AND Ø25MM POWDER COATING: RAL COLOR TO CHOOSE FIXATION: FIXED IN THE GROUND, SURFACE MOUNTING, FREE STANDING

MATERIAL: METAL, HOT DIP GALVANIZED FRAME: TUBULAR STEEL Ø30MM AND Ø25MM POWDER COATING: RAL COLOR TO CHOOSE FIXATION: FIXED IN THE GROUND, SURFACE MOUNTING, FREE STANDING ADFC proved!

length / width / height: 575 / 60 / 900 Complete model in stainless steel with a powder-coated surface in several in-house colours, several DB-colours and in RAL-colours smooth matt. The on-site installation can be done by bolt-on or concrete-in.

length / width / height: 1000 / 60 / 900 Complete model in stainless steel with a powder-coated surface in several in-house colours, several DB-colours and in RAL-colours smooth matt. The on-site installation can be done by bolt-on ...

length / width / height: 1000 / 60 / 900 Complete model in stainless steel with a powder-coated surface in several in-house colours, several DB-colours and in RAL-colours smooth matt. The on-site installation can be done by bolt-on ...

A stand with a minimalist circular form for a unique side profile. It is composed of a pair of materials: a galvanised steel frame on the inside, with an external coating of durable rubber. The ring is seated in a subtle aluminium alloy ...

This modest bicycle stand harks back to the range of Lotlimit railings and its essential contours can be easily integrated into any potential project. The stand reflects both contemporary and historical architecture. Anchored under under ...

This modest bicycle stand harks back to the range of Lotlimit railings and it sessential contours can be easily integrated into any potential project. The stand reflects both contemporary and historical architecture. Anchored under ...

The Hoop bicycle stand is a multi-functional urban design that can also function as a bollard. The design is simple, consisting of a single aluminium post where multiple bicycles can be securely fastened. The upper ring ...

... commercial areas. Blenda’s sleek, space-saving shape is an excellent alternative to outdoor bicycle racks in commercial areas, car parks or urban courtyards. Available with integrated light.

This striking cycle stand was created by a designer who is herself a keen cyclist. Designed with enthusiasm as well as practicality, this cycle stand is deliberately ...

... Bicycle Racks have a minimalist design combined with warm, thick-walled CorTen steel. Fitting CorTen Bicycle Racks with a standard plastic All Black anti-damage strip prevents damage to bicycle frames. ...

The Bike-Key Bicycle Rack is a bicycle stand with a contemporary design. The R&R hardwood beam of 7x15cm - 3x6 is anchored to the surface with poured concrete or by means of a separately available steel ...

Solid Bicycle Racks are basic lean-support racks fitted with a sturdy wooden top beam measuring 7x7cm - 28”x28”. They are part of Streetlife’s Solid product range. The untreated and sustainable FSC® hardwood ...

No better way than to take the recognizable letter "P" for Parking to create bike-bespoke urban furniture. This was the inspiration for the ZENITH bike parking system which stands out ...

PHENIX bike stands have a highly individual form with an extremely attractive contour in curved stainless steel tubing linked to a round mounting plate tailored to cycle parking, and which will weather the test of time.

The ANTARES bike stand in the form of a half-wheel is essential for securing bike frames and wheels. Users have no problem identifying the item, particularly when installed in 4 to 5 cycle ...

... / Width : 51 cm / Length : 33 cm / Structure / Galvanized steel sheet, thickness 4 mm / A laser-cut slot to lock the bike. Compatible to every lock /

Height above ground : 110 cm / Steel base : diameter 11 cm / Terracotta or brushed stainless steel part : diameter 7 cm / Steel head : diameter 7 cm / 1 Ring in steel tube diameter 2 cm / Ring width : 71 cm / Finish : Shot-peening ...

Height above ground: 80 cm / Width : 50 cm / Aluminium section : 40 x 22 mm / Finish : 1 chemical etching treatment + 1 trimetallic phosphatation + 1 epoxy-polyester powder coating / Ral colour of choice / To be embedded /

This range is recognisable by its original lines and harmonious combination of brushed stainless steel and wood. “ELLIPSON” certainly has character! + Ideas: In addition to hardwood, “Ellipson” also uses highpressure laminate (HPL). ...

A bike rack that holds wheels perfectly in place for total stability. The extra hoops allow users to easily lock wheels and frames together for maximum security Technical features Model: 6 spaces. Structure: ...

... features Height above ground: 850 mm. Width: 700 mm. Structure: steel tube ø 50 mm. Sign: 3 mm gauge sheet metal bike sign. Finish: galvanised steel. Installation: concreted directly into ground.

Our latest bicycle stand offers a simple and natural style. It makes it possible to secure the bike with ease, with a small footprint. Technical features Width: 150 mm. Height above ground: 960 mm. Structure: steel ...

SPIRALEO is a protected deign for a bike rack that is made from a heavy floor stable steel part and 5 hoops with a diam. of 27mm. Should be fixed to ground via 4 pre-drilled holes. The design enables ...

Main materials used: - Reinforced concrete - Hot galvanized steel

Main materials used: - Painted electro galvanized steel

The bicycle rack RACK-3 completes the street furniture in parks, streets, alleys, college campuses, residential areas, parking lots and is designed for bicycles parking. Outdoor Bicycle Rack ...

The bike parking stand RACK-2 completes the street furniture in parks, streets, alleys, college campuses, residential areas, parking lots and is designed for bicycles parking. Fixing Cycle Rack: The ...

... in price). Fixing Cycle Rack: The Bike Rack can be fixed to the ground through the flange with anchors ( the anchors are not included in price ). Material : metallic Lenght (mm) ...

B PARK BICYCLE RACK BY SIT URBAN DESIGN REF. 350 Material: Concrete and iron Weight: 190 kg Dimensions: 55 x 45 x 55 cm B PARK bicycle rack is a simple and smart modular ...

Material: Iron Weight: 32 kg Dimensions: 70 x 30 x 60 cm

SCOOTER galvanized or AISI 304 stainless steel scooter rack. Rounded shapes in order to park scooters. Modular park area to park 6-10-13 scooters, ideal to optimize space and secure scooter with chain / chain lock.

SCHOOL galvanized or AISI 304 stainless steel scooter rack. Rounded shapes in order to park scooters. Modular park area to park 6-9-12 scooters, ideal to optimize space and secure scooter with chain / chain lock.

ROLLER galvanized or AISI 304 stainless steel scooter rack. Rounded shapes in order to park scooters. Modular park area to park 6-9-14 scooters, ideal to optimize space and secure scooter with chain / chain lock.

Tulip is an elastic and safe bike rack which resembles a loop. It provides the freedom to choose the way of putting bikes in the rack. The fixing place for the bike ...

... a unique bike rack that can be used for securing bikes, but can also act as an artificial barrier in spaces when used in rows. The construction of Grazz ...

Ground mounted bicycle rack GM07-03 with special design. 3 racks on plate These kind of racks are used near commercial centers, shops, on parking, in parks and so on. Pipe diameter ...

... steel bicycle rack GM16 with a crossbar for additional fixation of bikes • Pipe diameter Ø 50 mm • Rack size 800х800 mm • Footpace: Ø150x6 mm • For mounting on ground Sizes: GM16-01 ...

P- shaped ground mounted bicycle rack GM06 with design specially for parking. Pipe diameter Ø42 mm 1 racks size 700x900 mm Any RAL color. Powder or thermoplastic coating Manufacture of coated, ...

P-shaped stainless steel bicycle rack for 2 bikes. Dimensions: Overall height - 80 cm Overall width - 70 cm The diameter of the tube - 48.3 mm The wall thickness of the tube - 2 mm

Stainless steel bicycle rack for 2 bikes. U-shaped rack with crossbar and plate with a bicycle parking symbol. Dimensions: Overall height - 80 cm Overall width - 100 cm The diameter of ...

U-shaped stainless steel bicycle rack for 2 bikes. Additional rails on both sides of the rack. Dimensions: Overall height - 80 cm Overall width - 60 cm Diameter of the foot - 12 cm The ...

Bicycle stand model consisting of a 33 mm diameter carbon steel tube, curved to achieve a spiral shape at the top. As it is offered in individual units, it can be deployed as needed and is very easy and convenient to use, as the bicycle ...