Stainless steel bike racks

The bike rack SIDE is made in steel 50/10 thickness. It is the result of the continuous welding of 2 elements and on the base there are 2 holes 14 mm diam. for the fixing to the ground ...

The bike rack FILM (4 bike version) is made in steel of 100/10 thickness. The spacers, where the wheels of the bikes are placed, are laser-cut and square-shaped ...

Anello 1 The bike rack Anello1 is made in calendered tubular steel with section 50 mm and 2 mm thickness. The fixing to the ground is through cementation of a tube welded to the ring, ...

Bike rack constructed from a spiral frame in tubular steel, attached to two horizontal bars in steel tube. The structure can be fixed to arched steel ...

... in tubular steel with threaded plates to be fixed in the base plate with suitable bolts. The bike rack can also be used as a modular barrier. POWDER COATED STEEL ...

Bike rack with supports in UHPC (Ultra High Performance Concrete) and stainless steel wheel support structure. The bike rack allows to secure the bike ...

... for an entire aesthetic coherence, the bike parking of the same name allows the secure fastening of the frame and wheel. Its fully refined P shape (for “parking”), is of pure discretion and renders the Zénith bike ...

... technical performance in the bending of stainless steel. This ambivalent simplicity / complexity makes it a furnishing apart which magnifies the nobility and the aesthetic qualities of the brushed stainless ...

... the AREA brand, authorizes a secured and simplified fastening of the wheel and frame. The Métropolis bike stand reuses the posts and stainless steel handrails of the barrier of the same name as well ...

Bicycle rack in galvanized and powder coated square steel tube and stainless steel or galvanized and powder coated steel plate with base plate and rubber strip that protects ...

Omega bike stand - Street Furniture. Made from curved steel or stainless steel tube, ø 60 mm. Low models with depth of seal 200 mm and signage models with depth of 300 mm. Low ​Oméga Height ...

Tiby & Vision bike stands - Street furniture. Lines made with post, ø 86, Tiby in steel and Vision in stainless steel. Machined solid steel or stainless steel ...

Exotica bike stand - Street furniture. Model made using turned solid wood Exotica bollard, ø 124, and machined solid stainless steel head. Stainless steel, flat curved, ...

... rubber belt gently clasp the front or rear wheel of any size. The steel pipe which is running through the rubber meanders is there to lock the bicycle. Stainless steel or galvanised steel ...

length / width / height: 575 / 60 / 900 Complete model in stainless steel with a powder-coated surface in several in-house colours, several DB-colours and in RAL-colours smooth matt. The on-site installation can be ...

length / width / height: 1000 / 60 / 900 Complete model in stainless steel with a powder-coated surface in several in-house colours, several DB-colours and in RAL-colours smooth matt. The on-site installation can ...

length / width / height: 1000 / 60 / 900 Complete model in stainless steel with a powder-coated surface in several in-house colours, several DB-colours and in RAL-colours smooth matt. The on-site installation can ...

WALL MOUNTED BIKE RACK. YEAR OF PRODUCTION: 2019 DIMENSIONS: CM 15 X 35 X 21,5 H. MATERIALS:STAINLESS STEEL, SOLID WOOD DESIGN: INSILVIS

WALL MOUNTED BIKE RACK. YEAR OF PRODUCTION: 2019 DIMENSIONS: CM 15 X 35 X 15 H. MATERIALS:STAINLESS STEEL, THERMOPLASTIC. DESIGN: INSILVIS

The ultimate bike rack: Decorative, modular and functional. Models: 3 or 6 spaces, single or double sided. Extensions: 6-space extension module, single or double sided. Structure: Steel ...

The ultimate bike rack: Decorative, modular and functional. Models: 3 or 6 spaces, single or double sided. Extensions: 6-space extension module, single or double sided. Structure: Steel ...

... ground: 1000 mm (excluding top cap). Width: 675 mm. Choose from five different top caps: City, Agora, Sphere, Forum and Stainless Steel. Finish: Galvanised & painted in our standard RAL colours. Installation: ...

... different colors and are of a specific size. The metal components involved in the construction are coated with ester-epoxy zinc primer and are powder coated. All other connecting elements are made out of stainless ...

Snake bicycle parking set with multiple configurations for 5, 7, 9 or 11 bikes depending on the model, built in galvanized iron or stainless steel.

Ari bicycle parking built in 304 or 316 stainless steel, pillar with flute-type upper cut and curved arch. Ari Bicycle Parking Set built in 304 or 316 stainless steel with 4, 5 or ...

Totem bicycle parking built from a plate structure in galvanized steel sheet, iron sheet plus gray oxiron lacquer or stainless steel sheet. Installation by anchor plate with metal plugs.

Advocate Bicycle Rack was inspired by the Bike Federation’s logo. The Advocate bike rack offers a whimsical touch to bike parking solutions. Advocate ...

Bike Bollards are the ideal dual-purpose parking stands. They can be used to limit access to bike-only trails and parking areas while providing riders with secure parking. They can also be used as security ...

The Capitol Square bicycle rack is 36" high and constructed of 2" square structural steel tubing. This allows for safe and secure bike parking because the square tubing acts as a deterrent ...

... The “UX” Rack allows the use of “U”-type locks and provides two-point contact when the bike is resting against it. Finishes Available finish on the UX Bike Racks ...

... basic bike rack is a simple, yet effective way to promote alternative transportation and provide adequate short-term parking. Finishes The U24 bicycle rack is available in Galvanized, ...

... Surface mounted. Other U Bike Racks UX Bike Rack 1-7/8" or 2-3/8" tube | 30" W x 34" H* U24 Bike Rack 1-78" tube | 24" W ...

Single bike rack. Can be accessed on both sides of the rack. The stability of the bike is guaranteed. Made of steel with zinc rich primer.

... rubber protection as well. The galvanized steel support structure is treated with powder coating. The individual lamellas of the bicycle stand made of stainless steel AISI 304 are connected through stainless steel ...

... not damage them. It is suitable for all bicycle types and sizes. The supporting structure is made of hot-galvanized or stainless steel. It is alternatively supplied for direct embedding or with a bottom ...

... usually contains four, six or eight chambers. The bicycle stand includes a welded structure made of hot-dip galvanized or stainless steel. There are four holes in the corners of the bicycle stand for ...

Ground mounted bicycle rack GM07-03 with special design. 3 racks on plate These kind of racks are used near commercial centers, shops, on parking, in parks and so on. Pipe diameter ...

... shaped ground mounted bicycle rack GM06 with design specially for parking. Pipe diameter Ø42 mm 1 racks size 700x900 mm Any RAL color. Powder or thermoplastic coating Manufacture of coated, galvanized ...

Stainless steel bicycle rack GM16 with a crossbar for additional fixation of bikes • Pipe diameter Ø 50 mm • Rack size 800х800 mm • Footpace: Ø150x6 mm • For mounting ...

MATERIAL - Concrete with helisteel frame zinced or Stainless Steel armor FINISH-Waterproof, Pickled FIXING - Simply Supported WEIGHT - Aproxímate 360 Kg

MATERIAL - Concrete with helisteel frame zinced or Stainless Steel armor FINISH - Waterproof, Pickled FIXING - Simply supported WEIGHT - Aproxímate 1 100 Kg

Bicycle rack Typo is a combination of functional exterior furniture and forwarder of information, advertisements and identity in the public space. Typo can be used as an artificial barrier showing for example a company ...

Metal Racks and Stands Designed for public, private or communal areas. In particuler, this model is available both with balck painted metal rack and in stainless ...

... number of bikes. - Galvanized steel - Finish : Epoxy paint - Protection of the hooks by a PVC sheath - Fixation to the wall by dowels Available in : 3 bikes - ...

Helical structure Stainless steel tube diameter 42 mm 304 L or 316 L stainless steel Glossy or brushed polished finish

Series formed by shower, foot shower, fountain, liter bin, signing, bicycle rack and floorboards for beaches or outdoors. Built with polished stainless steel structure AISI 316, which is closed with ...