Metal fastening systems

... load (e.g. ZinCo System Substrate, gravel or comparable bulk material) provides the necessary ballast. Due to the rigidity of this force-transmitting element, the system works in a small area and with ...

... interior of that unit. Expandable horizontal rail system with a continuously gliding runner. Installation is carried out without roof penetration by means of superimposed load (at least 110 kg/m² of ZinCo System ...

For safety reasons, roofs that are going to be used by people require a surrounding railing. The ZinCo Guard Rail Base is the perfect solution without penetrating the roof membrane. It is suitable for the installation of a ZinCo railing ...

Using incorporated round rods, the wire cloth elements are attached to on-site triangular fastening brackets, which again are attached to the sustructure.

... located behind the mesh. The connectors interlock with the mesh from the back. Standing in front of the element this mounting system is almost invisible.

A round rod is inserted into the cable mesh. Eyebolts are incorporated to tension the panels for example using a continuous substructure like an angle iron. The eyebolts allow for accurate settings of the tension.

Profile system GlassFit Flow The new profile systems in the GlassFit Flow range allow it to be adapted to practically all possible installation situations on site: top mounting and side mounting. ...

Profile system GlassFit Flow The new profile systems in the GlassFit Flow range allow it to be adapted to practically all possible installation situations on site: top mounting and side mounting. ...

Profile system GlassFit Flow The new profile systems in the GlassFit Flow range allow it to be adapted to practically all possible installation situations on site: top mounting and side mounting. ...

Construction board discs, plastic: ø 60 mm Internal diameter ø 5 mm Construction board discs, galvanized: ø 50 mm Internal diameter ø 5 mm Construction board discs, stainless steel: ø 36 mm Internal diameter ø 5.5 mm 5 pieces/m2

Fastens permanently and securely: JACKOBOARD® disc plugs. For mounting JACKOBOARD® Plano 5 pieces/m2 Dowel hole ø 8 mm

Secure fastening for all JACKOBOARD® construction board. Construction board discs, plastic: ø 60 mm Internal diameter ø 5 mm Construction board discs, galvanized: ø 50 mm Internal diameter ...

... Measure options available Variations to meet individual requirements, including different metal finishes and custom-made components are possible with this system.

... Measure options available Variations to meet individual requirements, including different metal finishes and custom-made components are possible with this system.

... are widely used to create metal ceilings with heavy paneling, even of large dimensions. The galvanized profiles model is used for the application of plaster-board ceilings, halving the laying time compared to traditional ...

... and technical-aesthetic features of B35. The model with punched cross T is used to realize the new Atena sealed health care system "35 Syncro Evo". FEATURES: B35 shaped-in clip Overlap cross T connection Elegant ...

Properly conceived to realize light metal ceilings in steel, aluminum or expanded metal panelling, EASY FOX T-grid of ATENA STEEL STRONG range features a quick-coupling clip made of stainless steel, without ...

... containing 70% Kynar 500 proprieary resin that acheives a pearlescent appearance. This "Two Coat" system is a cost-effective alternative to metallic systems requiring clear coats.

Fully transparent functionality Our glass plate supports are based on this simple but sophisticated principle and can be adapted to fit many kinds of installation situations and applications.

Flamea+ – uncompromising technology with higher loading capacity The new Flamea+ series offers a hinge program with completely covered screw connections and increased loading capacity. The gap distances of the swing door hinge could ...

Flamea+ – uncompromising technology with higher loading capacity The new Flamea+ series offers a hinge program with completely covered screw connections and increased loading capacity. The gap distances of the swing door hinge could ...

... STRATLOCK SIDE MOUNT FOR TIMBER FRAMEWORK Panel mounting onto aluminium framework has never been faster or more flexible. The all-new Stratlock system uses a two-stage clip mechanism to provide 4mm ...

... Designed and made in NZ, all clips are interchangeable. This hidden fixing system allows for flexing and expansion of panel and support frame. To ensure quality installation and performance ...

... align holes in panel and frame for correct clip alignment. Fits 10mm blind hole in panel drilled with CT-09; or into PC-F1A, PC-SF1, PC-RF1 and PC-AF1. See install guide. The International award winning ...

GFS offers a wide range of AISI 304 steel fittings, spacers, connectors for interior or AISI 316 for outside.

... finished by entering the canvas in an aluminium profile. Compatibility CU – 2B fixing system is compatible with the following metal mesh: Cangiante Dune Oro Fiamma Juta Liner Lizard M&M ...

The support you need. The line includes supports for shelves of various shapes and sizes; wall-mounted or suspended steel or aluminium solutions, kits for glass furniture. Elements that combine design and functionality and that meet ...

Point fixings for balustrades with adjustable spacer.

... might result in any tensions likely to break the glass pane. That’s why the system is suited to large cantilevers, assuring safety in line with current regulations. The systems for façades of the ...

... SUBSTRUCTURE SYSTEM FOR FACADE CLADDINGS, insulated or ventilated, consisting of profiles in alloy of aluminium, with high mechanical characteristics, able of ensuring absolute performance in terms of capacity and functionality. The ...

... SUBSTRUCTURE SYSTEM FOR FACADE CLADDINGS, insulated or ventilated, consisting of profiles in alloy of aluminium, with high mechanical characteristics, able of ensuring absolute performance in terms of capacity and functionality. The ...

... SUBSTRUCTURE SYSTEM FOR FACADE CLADDINGS, insulated or ventilated, consisting of profiles in alloy of aluminium, with high mechanical characteristics, able of ensuring absolute performance in terms of capacity and functionality. The ...

Complement to build Fences with SASTEAK. FIX-H Dimensions (cm) A x B 12 x 12 Piece Weight (kg) 3,5 Pieces bolsa 2 Weight bolsa (Kg) 3,5 FIX-U Dimensions (cm) A x B 12 x 12 Piece Weight (kg) 1,9 Pieces bolsa 2 Weight ...

... division gives the customers the opportunity to study and define an important variety of fixing systems for the different kinds of wire mesh offered. Each assembly system ...

Customizing available to satisfy any request. Special landing areas, laser cutting steps made of steel and glass steps in special dimensions, protection landing glass panels

GENERAL CHARACTERISTICS: * Fittings for wood doors. * For floor springs with pivot C "Square Pivot 16/19" and/or CI "Italian Square Pivot 13/16".

... at 1.10m -Maximum glass lenght is 2.50 m and height is 2.10m for a windbreak and railing function - Integrated drainage system

P20E - Profile for glass fixing P20E is the new aluminium profile which allows you to realize basic frames for continuous walls made of tempered and laminated glass. Suitable for offices and private rooms, as it easily divides the ...

... efficient indoor fitting. These are suitable for glass thicknesses from 3 to 13.5 mm. Countersunk screws can be used to mount all panel materials. The soft bearing protects the glass bore and keeps the element to be ...

GM PICO® RIGID FLUSH-MOUNTED POINT HOLDER FOR INDOOR USE GM PICO® was specially developed by Glas Marte for easy and rational indoor installation. Any countersunk screws with a diameter of 6 mm can be used to mount all plate materials ...

... barefoot on your deck because there are no visible and apparent fasteners -Robust and resistant to moisture Cobra Hybrid concept The Cobra® Hybrid 8-18 clip is a matte black dual-material fastener ...

... Developed by a team of wood specialist engineers, the Cobra® fastener system is the fruit of several years of studies and continuous improvement. It was originally designed to provide a reliable fastener ...

... anchoring system. This system is made up of bushes inserted in the panel during its manufacture, in this way the bushing is an intrinsic part of the piece propitiating the hidden anchorage ...

PANELTOR® ventilated facade anchorage with rivets is a traditional ventilated facade anchorage system for thin elements. Like our concealed system, and thanks to the ...

PANELTOR® turns the nail ventilated facade anchor system by adding an adhesive material to the length of the nail anchor profile. The large format of our concrete panels requires maximum safety, this ...