Thermal resistance: 1.9 m²K/W - 6.3 m²K/W
Thickness: 7 cm - 21 cm
Thermal conductivity: 0.035 W/(m.K)
Thermal resistance: 3.4 m²K/W - 7.55 m²K/W
Thickness: 120 mm - 265 mm
URSA France
Thermal conductivity: 0.034 W/(m.K)
Thermal resistance: 2.9 m²K/W - 7.35 m²K/W
Length: 1,000 mm
... Slabs of stone wool with windproof black fibreglass veil on one side for internal and external thermal, acoustic and fire insulation of buildings ...
AdePlast
Thickness: 75, 100, 25, 50 mm
... for thermal insulation of pipes, ducts and vessels. KIMMCO Lamella Insul is suitable for wide range of applications in HVAC and industrial sector such as: On large pipes, pipe cluster, or over heating traces, where performed insulation ...
KIMMCO
Thickness: 35 mm
... Acoustic ceiling panels that look good, perform well and are practical. Quietstone specialise in acoustic solutions so all our acoustic ceiling systems have excellent sound absorbing qualities. In addition these acoustic ceiling panels are hard wearing, ...
Quietstone UK Ltd
Thermal conductivity: 0.036 W/(m.K)
Thickness: 40, 50, 80, 100 cm
... Euro-Class A1 High density rigid panel in bio-soluble uncoated rock wool.The panel consists of mineral wool obtained from the fusion and the spinning of natural rocks. This material is water-repellent, elastic, easy ...
Thermal conductivity: 0.04 W/(m.K)
Thickness: 3 cm - 12 cm
... POLYSOL IR 150 is an insulation system produced using a hot lamination process to bond together a smooth or granule-surfaced waterproof plastomeric polymer bitumen membrane - featuring a reinforced fibre glass mat or polyester nonwoven ...
Palusol® is applied in the area of fire-protection. Fire-protection doors and glazing as well as in fireproof bulkheads for pipes, cables or ventilation elements prevent fire and smoke from spreading to other rooms for a given period of time. In case ...
Engineered to prevent damage to the sub-floor or wall cavity if moisture seeps through grouted tile, DensShield® Tile Backer is the first backer board with a built-in moisture barrier. It integrates a moisture-resistant core and microbial barrier* with ...
Georgia Pacific
Thermal conductivity: 0.065 W/(m.K)
... The sturdy natural stone mixture. The BISOTOP® Bio leveling fill is made of a natural expanded silicate perlite mixture, is not bituminized and contains no resins or plastics. The natural stone mixture ...
BISOTHERM
... through building fabric via conduction, convection, and radiation. Traditional bulk insulation mainly addresses conduction by trapping air in a thick matrix. Multi-foil insulation introduces a second line of defence: ...
Intech Foil Co.,Ltd
... Material for insulating and caulking stainless steel pipes for flue pipes and oven insulation. - Aluminized Rock Wool Insulating Cups - Calcium Aluminate Cement - Ceramic Fiber Insulation - ...
... reliable, efficient and economical insulation. Its mineral composition ensures not only absolute fire resistance and high insulation performance, but also a low carbon footprint and complete recyclability High ...
... system - on the insulation, get set, go! For new applications – just unfold it and you're done For new applications in radiant heating and cooling systems, Roth provides the new Flipfix Tacker system. It is suitable for use where ...
Thermal conductivity: 0.05 W/(m.K) - 0.39 W/(m.K)
... generation especially HRSG duct insulation • Industrial and Commercial Chimney insulation • Furnace, Boiler and Heater linings • Pipe wrap • Back-up linings in kilns and furnaces • Consumer goods • Storage heater ...
Morgan Advanced Materials
Length: 300 mm
Width: 600 mm
Thickness: 250 mm
... fiber module made of biosoluble BioFiberAlt ceramic fibers based on calcium and magnesium silicates with high thermal insulation values at operating temperatures of up to 1,200°C, which is characterized by the following properties: • ...
CBG Composites
... webertherm XP is an external wall insulation system using specially designed mineral one-coat render. Without the need to wait for a base coat to dry, application is fast and economical. Labour and scaffold costs are ...
Thermal conductivity: 0.04 W/(m.K)
Thickness: 0 mm - 6 mm
... GEOPERL® is a perlite, a natural white mineral that is obtained with a process of thermal expansion of a specific variety of effusive volcanic rock: it is used for thermal insulation. Perlite is an inorganic ...
Industrie Refrattari Srl
Thermal conductivity: 0 W/(m.K) - 0.25 W/(m.K)
... materials and different practices. External thermal insulation has become an important and dominant building energy-saving measure in China and has been widely used in various projects. Anteno insulation decorative ...
Thermal conductivity: 0.25 W/(m.K)
Length: 240, 244 cm
Width: 120, 122 cm
... wall applications subject to high traffic or humid conditions. KalsiPartition provides excellent acoustic insulation. The inclusion of mineral wool in the wall cavity improves both thermal and acoustic performance. All ...
Length: 200, 150, 300, 250, 100 mm
Width: 120 mm
Thickness: 30, 25, 35 mm
... products with gradual release of water, minimises the depth of sealing necessary to contain the passage of heat: with an insulating thickness for cables up to 21 mm in diameter of only 120 mm, AF BAGS can be completely inserted even inside ...
AF Systems
Length: 2,000 mm - 3,000 mm
Width: 1,200 mm
Thickness: 12.5, 15 mm
... (orange) fiberglass mat. With usual dimensions to those of plasterboard systems intended for construction, with thermal insulation with high values in terms of energy performance. Features • Length : 2000 à 3000 mm. • Width ...
... Thermal-acoustic insulation for attics by IBS Distribution ...
IBS Distribution
... CP insulating sheets from SINTEC are composed of an EPDM rubber flexible polymeric base with additives of mineral loads, which provide a high density material. These features make the CP sheets the perfect choice in most ...
Thickness: max 4.0 mm
... Softsound is the unique ecological soundproofing panel made using only natural mineral components. This special product is capable of ensuring excellent sound absorption and cancellation of any plaster/tile stresses. ...
the best suppliers