-
{{>productsMenu}}
- Catalogs
-
{{>projectsMenu}}
-
{{>trendsMenu}}
- E-MAGAZINE
- Building & Construction >
- Structural element >
- Prefab beam
Prefab beams
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}

Height: 15 cm - 60 cm
... purlins have a trapezoidal profile and are made of prestressd concrete. They rest on the beams. They are intended to support the roofing generally made of a steel housing with or without thermal insulation. A ...
RECTOR

Span: 370, 390, 360, 330 cm
Prestressed concrete beams with 7 cm drop, installed in pairs, available from stock, length in 10 cm steps. Their weight is 17 kg per linear metre. Resting on a wall or a column, they support a joist floor. Depending ...
RECTOR

Width: 15 cm - 50 cm
Height: 15 cm - 80 cm
RECTOR

Span: 13,500 mm
Width: 70 mm - 240 mm
Height: 120 mm - 400 mm
... that are glued together on both sides, to form the desired section. These layers are dried to 10-12%, giving the laminated beams a guarantee for drying, which ensures the absence of cracks and overall stability. Manufactured ...

Span: 56 m
Height: 2 m
Hüttemann Engineering Timber is the term for high-quality timber. Free-spanned glulam structures allow for a wide variety of design options and flexibility. Industrial and commercial building production halls warehouses Sports ...
HUTTEMANN WISMAR GMBH&CO.KG

Span: 11 m
Height: 50 cm
PRETERSA PRENAVISA

Width: 40 cm
Height: 40, 50, 60 cm
PRETERSA PRENAVISA

Width: 12, 20 cm
Height: 40, 60, 80 cm
PRETERSA PRENAVISA

Height: 200 mm - 600 mm
... rip-sawn to order. Kerto® LVL S-beam is normally supplied in the form of straight beams but it can also be specially cut and shaped as required. Kerto® LVL S-beams for roof beams, ...
Metsäwood

Height: 350 mm - 465 mm

Height: 145 mm - 450 mm

Height: 120 mm - 450 mm


Span: 2 m - 6 m

Roof purlins are lightweight prestressed elements that are used to support the roof covering material in industrial buildings; they also serve to lend stiffness to prefabricated structures. Purlins of various depths can be used depending ...
Pujol

... of prefabrication of the elements in order to reduce the installation time. The Prefabricated Composite Beam (PreCoBeam) is made of a heavy beam that is oxycut along its web with a specific geometry ...

Double tees are used in floor and roof systems requiring medium to long, uninterrupted spans and heavy load carrying capabilities. They come in a variety of widths and depths to suit different spans and loading conditions. The remarkable ...

In the ante-Group, KVH® (solid structural timber) is produced out of spruce, pine and Douglas fir using state-of-the-art systems. Thanks to its defined quality and dimensional stability, KVH® has become an indispensable material for modern ...

... buildings Sports halls and leisure facilities Areas of use Roof truss and roof structures even in the exposed area Long-span main beams also in special shapes Supports and columns Ceiling structure or as support grid ...
HASSLACHER NORICA TIMBER


Span: 20 m
These beams span between the columns and are placed at regular intervals (generally 7-8m bays) along the length of a stand. Seating units are then placed between the raker beams, to provide the seating ...

Span: 15 m - 30 m
LPM

Span: 12 m - 30 m
Height: 214 cm
... shoring, P 35 for a 35 tonne working load and S 40 for 40 tonnes. This equipment is often used in association with cross beams or with a specially designed structure according to the nature of the stresses.

Engineered from high-tensile pre-galvanised steel, UltraBeam side rails outperform traditional products in every respect. Their cold rolled construction delivers a stronger product to enable significant material and weight savings ...
HADLEY

Over the years FARCIMAR has been distinguished, mainly, for its ability to create new articles providing, on site, all the advantages of precasting. As a major example of this fact is the development of several solutions through new ...

KP1

Height: 200 mm - 400 mm
GIPEN

... substances.plastic i beam The most recent innovation in steel reinforced beams is our KLP®-S I-Beam. The unique design of this beam requires less material and therefore ...

Apart from the mobile roofs, the marine installations and the ones on land, we also regularly manufacture aluminium constructions for the industry. In aluminium for a lightweight, sustainable solution; in stainless steel for specific ...

Jamar is a reputable steel structure construction company. We are qualified and specialized in design, fabrication and construction of steel structure building. Since Jamar established in 1989 delivered a number of steel projects, Steel ...

Span: 60 m
Flexsa are plane reticular beams with inclined slopes or parallel bridles in hot galvanized steel or AISI 304 stainless steel. Flexsa has a linkage system according to the patent number 01310850, made with continuous ...
PROFILSIDER
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please specify:
Help us improve:
remaining